In many situations, stand-off remote-sensing and hazard-interdiction techniques over realistic operational areas are often impractical "and difficult to characterize. An alternative approach is to implement an adap- tively deployable array of sensitive agent-specific devices. Our group has been studying the collective be- havior of an autonomous, multi-agent system applied to chedbio detection and related emerging threat applications, The current physics-based models we are using coordinate a sensor array for mukivanate sig- nal optimization and coverage as re,alized by a swarm of robots or mobile vehicles. These intelligent control systems integrate'glob"ally operating decision-making systems and locally cooperative learning neural net- works to enhance re+-timp operational responses to dynarnical environments examples of which include obstacle avoidance, res~onding to prevailing wind patterns, and overcoming other natural obscurants or in- terferences. Collectively',tkensor nefirons with simple properties, interacting according to basic community rules, can accomplish complex interconnecting functions such as generalization, error correction, pattern recognition, sensor fusion, and localization. Neural nets provide a greater degree of robusmess and fault tolerance than conventional systems in that minor variations or imperfections do not impair performance. The robotic platforms would be equipped with sensor devices that perform opticaI detection of biologicais in combination with multivariate chemical analysis tools …

Analytical results are presented on the chemical composition and other physical properties of a glass, given the identification BNFL-A-S98, made at Pacific Northwest National Laboratory' that is representative of the low-activity waste glass composition proposed by BNFL, Inc.* for immobilization of envelope A double-shell tank wastes at the Hanford Site. This glass was prepared for use in a testing program to be conducted at Pacific Northwest National Laboratory and at Argonne National Laboratory for the purpose of characterizing its long-term corrosion behavior. Detailed examination of the glass microstructure using transmission electron microscopy showed structural features indicative of amorphous phase separation. A remelt was performed on a smaller batch (100 g) to ensure rapid cooling. The glass microstructure was reexamined and showed no evidence of phase separation. Selected long-term (some to 860 d) product consistency tests were terminated, and the leachates were analyzed on tests with three other representative low-activity waste glass formulations (L8- 1, L8-3, and L8-7). The results showed no evidence of corrosion rate acceleration at three times the duration of tests where another well-studied glass, LD6-5412, had been completely altered under identical test conditions. These tests (and others not discussed in this report) provide clear evidence that low-activity …

This report discusses the procedures used to perform the sampling, the methods used to analyze the samples, and the results.

The intermetallic compound, molybdenum disilicide (MoSi{sub 2}) is being considered for high temperature structural applications because of its high melting point and superior oxidation resistance at elevated temperatures. The lack of high temperature strength, creep resistance and low temperature ductility has hindered its progress for structural applications. Plasma spraying of coatings and structural components of MoSi{sub 2}-based composites offers an exciting processing alternative to conventional powder processing methods due to superior flexibility and the ability to tailor properties. Laminate, discontinuous and in situ reinforced composites have been produced with secondary reinforcements of Ta, Al{sub 2}O{sub 3}, SiC, Si{sub 3}N{sub 4} and Mo{sub 5}Si{sub 3}. Laminate composites, in particular, have been shown to improve the damage tolerance of MoSi{sub 2} during high temperature melting operations. A review of research which as been performed at Los Alamos National Laboratory on plasma spraying of MoSi{sub 2}-based composites to improve low temperature fracture toughness, thermal shock resistance, high temperature strength and creep resistance will be discussed.

The Hanford Site, located adjacent to and north of Richland, Washington, is operated by the US Department of Energy, Richland Operations Office (RL). The 324 Building is located in the 300 Area of the Hanford Site. The 324 Building was constructed in the 1960s to support materials and chemical process research and development activities ranging from laboratory/bench-scale studies to full engineering-scale pilot plant demonstrations. In the mid-1990s, it was determined that dangerous waste and waste residues were being stored for greater than 90 days in the 324 Building Radiochemical Engineering Cells (REC) and in the High-Level Vault/Low-Level Vault (HLV/LLV) tanks. [These areas are not Resource Conservation and Recovery Act of 1976 (RCRA) permitted portions of the 324 Building.] Through the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-89, agreement was reached to close the nonpermitted RCRA unit in the 324 Building. This closure plan, managed under TPA Milestone M-20-55, addresses the identified building areas targeted by the Tri-Party Agreement and provides commitments to achieve the highest degree of compliance practicable, given the special technical difficulties of managing mixed waste that contains high-activity radioactive materials, and the physical limitations of working remotely in the areas within the subject …

This document is to identify the Project W-320 1000 CFM portable exhauster documentation required to be turned over from the Projects Organization to the Tank Farm Operations as part of the acceptance of the 1000 CFM portable exhausters for beneficial use.

A seven-day demonstration of the use of 3M Empore membrane filter loaded with ion exchange material (potassium cobalt hexacynoferrate (CoHex)) for cesium uptake was completed at the R-Disassembly Basin. The main goal of the demonstration was to evaluate the ability of the Process Absorber Development unit (PADU), a water pre-filtration /CoHex configuration on a skid, to remove cesium from R-Disassembly Basin at a linear processing flow rate of 22.71 liters (6 gallons) per minute.

This document provides storage requirements for 1,000 CFM portable exhausters POR-O07/Skid E and POR-008/Skid F. These requirements are presented in three parts: preparation for storage, storage maintenance and testing, and retrieval from storage. The exhauster component identification numbers listed in this document contain the prefix POR-007 or POR-008 depending on which exhauster is being used.

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable.

An improved understanding of strongly-driven laser plasma coupling is important for optimal use of the National Ignition Facility (NIF) for both inertial fusion and for a variety of advanced applications. Such applications range from high energy x- ray sources and high temperature hohlraums to fast ignition and laser radiography. We discuss a novel model for the scaling of strongly-driven stimulated Brillouin and Raman scattering. This model postulates an intensity dependent correlation length associated with spatial incoherence due to filamentation and stimulated forward scattering. We first motivate the model and then relate it to a variety of experiments. Particular attention is paid to high temperature hohlraum experiments, which exhibited low to modest stimulated Brillouin scattering even though this instability was strongly driven. We also briefly discuss the strongly nonlinear interaction physics for efficient generation of high energy electrons either _ by irradiating a large plasma with near quarter-critical density or by irradiating overdense targets with ultra intense laser

This document provides verification that the methodology for the safe retrieval of high-heat waste from Tank 241-C-106 as specified in the WRSS Process Control Plan HNF-SD-PCP-013, Revision 1, has been adequately implemented into the Tank Waste Remediation System (TWRS) operational procedures. Tank 241-C-106 is listed on the High Heat Load Watch List.

Rate estimation of nuclear pulses emitted from nuclear detectors has been well documented in papers written as early as 1965 to as recently as 1990. It is well known that pulses emitted from a nuclear detector can vary with time and an accurate estimate of the count rate must be based on a sifficient number of pulse counts within a sample period as well as the recent history of pulse counts acquired in previous windows to accurately estimate the current rate. This paper will review the attributes of three popular counting methods and show the implementation of one of these methods, the floating mean algorithm on an embedded controller system. The software discussion will look at how to apply the chosen algorithm on two popular platforms: the Motorola 68HC11 and the Intel 805X series embedded controllers.

Proteins are remarkable molecular machines that are essential for life. They can do many things ranging from the precise control of blood clotting to synthesizing complex organic compounds. Pictures of protein molecules are in high demand in biotechnology because they are important for applications such as drug discovery and for engineering enzymes for commercial use. X-ray crystallography is the most common method for determining the three-dimensional structures of protein molecules. When a crystal of a protein is placed in an X-ray beam, scattering of X-rays off the ordered molecules produces a diffraction pattern that can be measured on a position-sensitive CCD or image-plate detector. Protein crystals typically contain thousands of atoms and the diffraction data are generally measured to relatively low resolution. Consequently the direct methods approaches generally cannot be applied. Instead, if the crystal is modified by adding metal atoms at specific sites or by tuning the wavelength of the X-rays to cross an absorption edge of a metal atom in the crystal, then the information from these additional measurements is sufficient to first identify the /locations of the metal atoms. This information is then used along with the diffraction data to make a three-dimensional picture of electron densities. …

The objectives were to determine the elastic constants of thin films deposited on substrates, to measure residual stress and to detect and characterize defects in thin film substrate configurations. There are many present and potential applications of configurations consisting of a thin film deposited on a substrate. Thin films that are deposited to improve the hardness and/or the thermal properties of surfaces were of principal interest in this work. Thin film technology does, however, also include high {Tc} superconductor films, films for magnetic recording, superlattices and films for band-gap engineering and quantum devices. The studies that were carried out on this project also have relevance to these applications. Both the film and the substrate are generally anisotropic. A line-focus acoustic microscope has been used to measure the speed of surface acoustic waves (SAW) in the thin film/substrate system. This microscope has unique advantages for measurements in anisotropic media. Analytical and numerical techniques have been employed to extract the desired information on the thin film from the measured SAW data. Results include: (1) analytical and numerical techniques for the direct problem and for inverse methods; (2) measurements of homogeneous and superlattice film constants; (3) investigation of the effect of surface roughness …

A theory of tapered laser cooling for fast circulating ion beams in a storage ring is constructed. The authors describe the fundamentals of this new cooling scheme, emphasizing that it might be the most promising way to beam crystallization. The cooling rates are analytically evaluated to study the ideal operating condition. They discuss the physical implication of the tapering factor of cooling laser, and show how to determine its optimum value. Molecular dynamics method is employed to demonstrate the validity of the present theory.

ER-20-6{number_sign}1 was cored to determine fracture and lithologic properties proximal to the BULLION test cavity. Selected samples from ER-20-6{number_sign}1 were subjected to matrix and/or fracture diffusion experiments to assess solute movement in this environment. Micrographic analysis of these samples suggests that the similarity in bulk chemical composition results in very similar mineral assemblages forming along natural fractures. These samples are all part of the mafic-poor Calico Hills Formation and exhibit fracture-coating mineral assemblages dominated by mixed illite/smectite clay and illite, with local opaline silica (2,236 and 2, 812 feet), and zeolite (at 2,236 feet). Based on this small sample population, the magnitude to which secondary phases have formed on fracture surfaces bears an apparently inverse relationship to the competency of the host lithology, reflected by variations in the degree of fracturing and the development of secondary phases on fracture surfaces. In the flow breccia at 2,851 feet, thinly developed, localized coatings are developed along persistent open fracture apertures in this competent rock type. Fractures in the devitrified lava from 2,812 feet are irregular, and locally blocked by secondary mineral phases. Natural fractures on the zeolitized tuff from 2,236 feet are discontinuous and irregular and typically obstructed with secondary mineral phases. …

The assembly of an optical system requires the correction of aberrations in the entire imaging field by making selected rigid-body motions of the optical elements. We present a rigorous method for determining which adjustment motions, called compensators, to use for alignment. These compensators are found by employing techniques from linear algebra that choose the most independent vectors from a set which are interdependent. The method finds the smallest number of compensators to correct for misalignments of a given magnitude. As an example the method is applied to a four-mirror scanning ring-field EUV lithography system. It is shown that out of 32 degrees of freedom in the configuration of the optical elements, only eight compensators are required on the optics. By adjusting these compensators a misaligned configuration giving a 30 {lambda} wavefront error can be assembled to {lambda}/50 in the absence of measurement noise.

The North Star Research Corporation Medical Waste project is described in this report, with details of design, construction, operation, and results to date. The project began with preliminary design of the accelerator. The initial design was for a single accelerator chamber with a vacuum tube cavity driver built into the chamber itself, rather than using a commercial tube separate from the RF accelerator. The authors believed that this would provide more adjustability and permit better coupling to be obtained. They did not have sufficient success with that approach, and finally completed the project using a DC accelerator with a unique new scanning system to irradiate the waste.

A sintered metal ceramic crucible suitable for high temperature induction melting of reactive metals without appreciable carbon or silicon contamination of the melt. The crucible comprises a cast matrix of a thermally conductive ceramic material; a perforated metal sleeve, which serves as a susceptor for induction heating of the crucible, embedded within the ceramic cast matrix; and a thermal-shock-absorber barrier interposed between the metal sleeve and the ceramic cast matrix to allow for differential thermal expansions between the matrix and the metal sleeve and to act as a thermal-shock-absorber which moderates the effects of rapid changes of sleeve temperature on the matrix.

A model-based flotation control scheme is being implemented to achieve optimal performance in the handling and treatment of fine coal. The control scheme monitors flotation performance through on-line analysis of tailings ash content. Then, based on an on-line estimate of incremental ash, the pulp level is adjusted using a model-based control algorithm to compensate for feed variations and other process disturbances. Recent developments in sensor technology are being applied for on-line determination of slurry ash content. During the tenth quarter of this project, Task 6 (Equipment Procurement and Installation) was completed through the efforts of J.A. Herbst and Associates, Virginia Tech, Pittston Coal Company, and FGR Automation. As a result of this work, a model-based control system is now in place which can predict incremental ash based on tailings ash content and general plant data, and adjust pulp level accordingly to maintain a target incremental ash. Testing of this control system is expected to be carried out during the next quarter, and the results of this testing will be reported in the Eleventh Quarterly report. In addition, calibration of the video-based ash analyzer was continued and an extensive set of calibration data were obtained showing that the plant is running …

The critical energy inkstructures include gas, OL and electric power. These Mrastructures are complex and interdependent nmvorks that are vital to the national secwiy and social well being of our nation. Many electric power systems depend upon gas and oil, while fossil energy delive~ systems depend upon elecnic power. The control mechanisms for these Mrastructures are often referred to as SCADA (Supmivry CkmdandDaU Ac@itz&z) systems. SCADA systems provide remote monitoring and centralized control for a distributed tmnsportation infmsmucture in order to facilitate delivery of a commodi~. AIthough many of the SCADA concepts developed in this paper can be applied to automotive mmsponation systems, we will use transportation to refer to the movement of electrici~, gas, and oil. \ Recently, there have been seveml reports suggesting that the widespread and increasing use of SCADA for control of energy systems provides an increasing opportuni~ for an advers~ to cause serious darnage to the energy inbstmcturei~. This damage could arise through cyber infiltration of the SCADA networks, by physically tampering with the control networks, or through a combination of both means. SCADA system threats decompose into cyber and physical threats. One solution to the SCADA security problem is to design a standard for …

Process designs and economics were developed to produce LNG and liquid carbon dioxide (CO{sub 2}) from landfill gas (LFG) using the Acrion CO{sub 2} wash process. The patented Acrion CO{sub 2} wash process uses liquid CO{sub 2} to absorb contaminants from the LFG. The process steps are compression, drying, CO{sub 2} wash contaminant removal and CO{sub 2} recovery, residual CO{sub 2} removal and methane liquefaction. Three flowsheets were developed using different residual CO{sub 2} removal schemes. These included physical solvent absorption (methanol), membranes and molecular sieves. The capital and operating costs of the flowsheets were very similar. The LNG production cost was around ten cents per gallon. In parallel with process flowsheet development, the business aspects of an eventual commercial project have been explored. The process was found to have significant potential commercial application. The business plan effort investigated the economics of LNG transportation, fueling, vehicle conversion, and markets. The commercial value of liquid CO{sub 2} was also investigated. This Phase 1 work, March 1998 through February 1999, was funded under Brookhaven National laboratory contract 725089 under the research program entitled ``Liquefied Natural Gas as a Heavy Vehicle Fuel.'' The Phase 2 effort will develop flowsheets for the following: (1) …

Estimation of leaf photosynthetic rate (A) from leaf nitrogen content (N) is both conceptually and numerically important in models of plant, ecosystem and biosphere responses to global change. The relationship between A and N has been studied extensively at ambient CO{sub 2} but much less at elevated CO{sub 2}. This study was designed to (1) assess whether the A-N relationship was more similar for species within than between community and vegetation types, and (2) examine how growth at elevated CO{sub 2} affects the A-N relationship. Data were obtained for 39 C{sub 3} species grown at ambient CO{sub 2} and 10 C{sub 3} species grown at ambient and elevated CO{sub 2}. A regression model was applied to each species as well as to species pooled within different community and vegetation types. Cluster analysis of the regression coefficients indicated that species measured at ambient CO{sub 2} did not separate into distinct groups matching community or vegetation type. Instead, most community and vegetation types shared the same general parameter space for regression coefficients. Growth at elevated CO{sub 2} increased photosynthetic nitrogen use efficiency for pines and deciduous trees. When species were pooled by vegetation type, the A-N relationship for deciduous trees expressed on …

A Vertical Seismic Profile (VSP) was recorded in Rye Patch by LBNL between December 11 and December 13, 1997. Figure 1 shows the location of the Rye Patch Geothermal Field with Well 46-28 located within the marked Rye Patch Anomaly. The VSP in Well 46-28 used a vibroseis source and a single-level, high temperature, hydraulic wall-locking, 3-component seismometer. The vibroseis source was a Mertz P-wave vibrator. The source sweep was 10 Hz to 80 Hz, 10 seconds long, with a 0.2 s cosine taper. The borehole geophone was an SSC model LVHK 6001 using 14 Hz geophones. The recording system was a Geometrics Strataview. Six data channels were recorded: the three geophones, the source pilot, the vibrator reference and the vibrator baseplate accelerometer. The record length was 12,288 samples at a 1 ms sample rate, giving a 2.3 s correlated record length. A 10 Hz low cut filter was used and no high cut filter was used except the anti-alias filter. Results are described.