This report provides an analysis of S. 2230, the Indian Gaming Regulatory Act Amendments of 1994 introduced June 23, 1994, to amend the Indian Gaming Regulatory Act. It includes sections on stated purposes, enhanced powers of the National Indian Gaming Commission, proposed tribal-state compacting process, modifications of current law with respect to class II gaming, modification of current law with respect to class III gaming, and miscellaneous amendments.

None

The principal effort has been concentrated on the preparation of clean clinoptilolite, quartz, and boehmite and then reaction of the natural clinoptilolite solid solution to the Naendmember, plus measurements of the endmember solubility to derive an accurate equilibrium constant for the clinoptilolite dissolution reaction, correctly speciated. We are very pleased with the consistency between the best calorimetrically measured and modeled equilibrium constants and those we have determined from 125{degrees}C to 265{degrees}C. These results now provide a basis for relating measurements of reaction rates to departures from equilibrium.

This Test Procedure addresses the testing of the functionality of the Tank Monitor and Control System (TMACS) Panalarm bridge software. The features to be tested are: Bridge Initialization Options; Bridge Communication; Bridge Performance; Testing Checksum Errors; and Testing Command Reject Errors. Only the first three could be tested; the last two have been deferred to a later date.

The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays.

Building anchorage analysis is performed to qualify the design of the new compressor building foundation given in the ECN ``241-U-701 New Compressor Building.`` Recommendations for some changes in the ECN are made accordingly. Calculations show that the 6-in.-slab is capable of supporting the pipe supports, and that the building foundation, air compressor and dryer anchorage, and electric rack are adequate structurally. Analysis also shows that the instrument air piping and pipe supports for the compressed air system meet the applicable code requirements and are acceptable. The building is for the U-Farm instrument air systems.

A Waste Sluicing System (WSS) is scheduled for installation in nd waste storage tank 241-C-106 (106-C). The WSS will transfer high rating sludge from single shell tank 106-C to double shell waste tank 241-AY-102 (102-AY). Prior to installation of the WSS, a heel pump and a transfer pump will be removed from tank 106-C and an agitator pump will be removed from tank 102-AY. Special flexible receivers will be used to contain the pumps during removal from the tanks. After equipment removal, the flexible receivers will be placed in separate containers (packagings). The packaging and contents (packages) will be transferred from the Tank Farms to the Central Waste Complex (CWC) for interim storage and then to T Plant for evaluation and processing for final disposition. Two sizes of packagings will be provided for transferring the equipment from the Tank Farms to the interim storage facility. The packagings will be designated as the WSSP-1 and WSSP-2 packagings throughout the remainder of this Safety Evaluation for Packaging (SEP). The WSSP-1 packagings will transport the heel and transfer pumps from 106-C and the WSSP-2 packaging will transport the agitator pump from 102-AY. The WSSP-1 and WSSP-2 packagings are similar except for the length.

The purpose of this report is to compile data generated during the initial tests and inspections of the Beneficial Uses Shipping System (BUSS) Cask. In addition, this report will verify that the testing criteria identified in section 8.1 of the BUSS Cask Safety Analysis Report for Packaging (SARP) was met. The BUSS Cask Model R-1 is a type B shipping container used for shipment of radioactive cesium-137 and strontium-90 capsules to Waste Encapsulation and Storage Facility (WESF). The BUSS Cask body and lid are each one-piece forgings fabricated from ASTM A473, Type 304 stainless steel. The primary purpose of the BUSS Cask is to provide shielding and confinement as well as impact, puncture, and thermal protection for the capsules under both normal and accident conditions. Chapter 8 of the BUSS Cask SARP requires several acceptance tests and inspections, each intended to evaluate the performance of different components of the BUSS Cask system, to be performed before its first use. The results of the tests and inspections required are included in this document.

The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addressed the report generation capability of the TMACS. The features to be tested are generation of the alarm history report, equipment failure report, single-shell tank report and double-shell tank report.

This engineering work plan will support the activities of a pilot encapsulation of the spent fuel rods at 105KE Basin for the Hanford Site. The plan is to move and resue any existing encapsulation equipment in the Basin to another part of the Basin. This plan will discuss the activities involved in moving the seal conveyor system.

During the past year, the authors have used the Surface Forces Apparatus (SFA) to measure the intermolecular forces between a model protein (hen egg-white lysozyme) and a model hydrophilic surface (mica), between lysozyme and itself and between lysozyme and a model hydrophobic surface composed of a crosslinked alkoxysilane surfactant (hexadecyltriethoxysilane, HTE). As expected, repulsive forces are dominant between the hydrophilic surfaces with the same charge (lysozyme-lysozyme) while attractive forces are dominant between oppositely charged surfaces (lysozyme-mica) and between the lysozyme and the hydrophobic surface. The DLVO theory for charged surfaces was found to agree with the results of the lysozyme-lysozyme interaction. Efforts also have been focused on trying to create a well-formed, defect-free monolayer of the HTE on the surface of the mica using a Langmuir-Blodgett (LB) apparatus. A smooth, defect-free surface is desired for the intermolecular force studies. Atomic force microscopy has been used to determine the topography of the HTE films.

The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the sensor configuration, conversion and logging requirements of the TMACS. The features to be tested are as follows: sensor configuration data; conversion of continuous sensor data to engineering units; conversion of digital data to discrete states; discrete sensor data logging; and continuous sensor data logging.

Before low-level waste may be disposed of, a performance assessment must be written and then approved by the U.S. Department of Energy. The performance assessment is to determine whether {open_quotes}reasonable assurance{close_quotes} exists that the performance objectives of the disposal facility will be met. The DOE requirements for waste disposal require: the protection of public health and safety; and the protection of the environment. Although quantitative limits are sometimes stated (for example, the all exposure pathways exposure limit is 25 mrem/year), usually the requirements are stated in a general nature. Quantitative limits were established by: investigating all potentially applicable regulations as well as interpretations of the Peer Review Panel which DOE has established to review performance assessments, interacting with program management to establish their needs, and interacting with the public (i.e., the Hanford Advisory Board members; as well as affected Indian tribes) to understand the values of residents in the Pacific Northwest.

Japan is one of the world's largest wood importers, with two-thirds of its imports as logs (unprocessed timber). Southeast Asia has been the largest log supplier, but supplies (and exports to Japan) have been declining. The United States has become a more important supplier, but concerns about declining domestic timber supplies have led to proposals to prohibit or to tax log exports. Opponents suggest that Japan would simply turn to other sources to replace U.S. logs. One question in this debate is where the alternative sources of logs or wood products might be.

None