A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification: Constitutionality of legislation to permit the Department of Human Resources to represent the state in court in child support collection cases.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification: Whether a county may purchase capital equipment with funds collected pursuant to article 7048a, V.T.C.S..

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification: Whether a proposed procedure of the Air Control Board violates the Open Meetings Act.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification.; Compensation of witnesses as experts.

This report is about the Higher education act of 1965.

The computer programs, including HYBRID, VSYS, VEHIC and CRASH, used to compute the energy and fuel consumption, life-cycle costs and performance characteristics of a hybrid electric-powered vehicle are described and their use documented. (LCL)

The design requirements, design philosophy, method and assumptions, and preliminary computer-aided design of the Near-Term Hybrid Vehicle including its electric and heat power units, control equipment, transmission system, body, and overall vehicle characteristics are presented. (LCL)

The results of Task I, mission analysis and performance specifications, for the Near-Term Hybrid Vehicle (NTHV) development program are presented. The items researched included trip characteristics, market potential, life-cycle cost and performance specifications of NTHV's. (LCL)

The results of the design trade-off studies and the sensitivity analysis of Phase I of the Near Term Hybrid Vehicle (NTHV) Program are presented. The effects of variations in the design of the vehicle body, propulsion systems, and other components on vehicle power, weight, cost, and fuel economy and an optimized hybrid vehicle design are discussed. (LCL)

These four appendices to the report on the Near-Term Hybrid Vehicle (NTHV) report contain information on: HYBRID computer program documentation; material substitution study for advanced hybrid vehicles; NTHV market potential; battery compartment weight distribution; and vehicle handling dynamics. (LCL)

The UDD sensor bar with modified cross-section (0.0938-in. thick by 0.25-in. high overall) was analyzed to determine its resonant frequencies. Thermal and fluid-induced stresses due to steady-state and LOCE loads were also calculated. The sensor bar was shown not to be subject to vortex-shedding lock-in and was shown to meet applicable criteria of the ASME Boiler and Pressure Vessel Code. Seismic loads are insignificant compared to fluid loads.

This Phase I summary report contains a description of the 8 kW wind energy conversion system developed by the United Technologies Research Center (UTRC) for the Department of Energy. The wind turbine employs the UTRC Bearingless Rotor Concept in conjunction with a passive pendulum control system which controls blade pitch for start-up, efficient power generation, and high-speed survivability. The report contains a summary of the experimental and analytical programs in support of design efforts. These supporting programs include materials tests, a wind tunnel program, and aeroelastic analyses to evaluate system stability. An estimate is also made of the projected manufacturing cost of the system if produced in quantity.

Near stoichiometric bulk polycrystalline CdSiAs/sub 2/ has been synthesized by two techniques: (1) direct fusion of the elements and (2) direct fusion of the binaries SiAs, Cd/sub 3/As/sub 2/ and CdAs/sub 2/. The latter technique resulted in denser ternary material with good homogeneity. The above binaries melt congruently and were also formed by direct fusion. Sputtered ternary films were formed using a bulk CdSiAs/sub 2/ target, and a composite target of CdAs/sub 2/ discs in a Si plate. Composition of the CdSiAS/sub 2/ target changed with sputtering time. Amorphous films deposited from that target were heat treated, and became crystalline and near stoichiometric but with poor mechanical properties. It appears that films deposited from the composite target (Si + CdAs/sub 2/) can be adjusted to stoichiometry by means of sputtering power and target geometry. As deposited, these films also were amorphous. With respect to evaporated films, the study of thermal decomposition of CdSiAs/sub 2/ in vacuum was completed. The decomposition is preferential toward Cd between 570/sup 0/ and 710/sup 0/C, and toward As in the 710 to 1010/sup 0/C range. It is concluded that evaporation of the ternary is not a suitable method for forming CdSiAs/sub 2/ films. Plans for …

The Composite Bearingless Wind Turbine was developed at the United Technologies Research Center following many years of bearingless rotor research and development for helicopter applications. The current 8 kW contract was begun in October 1977 with delivery of the prototype scheduled for November 1979. The contract consists of two phases. Phase I encompasses the complete design of the system and supporting analytical and experimental studies. The Phase I final report has been completed, and this executive summary highlights the principal findings described in that report.

Research is reported on materials for magnetic fusion energy, laser fusion energy, Al-air batteries, geothermal energy, oil shale, nuclear waste management, thermochemical cycles for hydrogen production, chemistry, and basic energy science. (FS)

Recent developments in computer based systems for quantitative x-ray microanalysis, 4 Pi surface examination, Auger electron spectroscopy and Backscattered Microtopography measurement have extended the Scanning Electron Microscope's applications in ICF target development and production.

Inertial confinement fusion requires production of power plant grade targets at high rates and process yield. A review of present project specifications and techniques to produce targets is discussed with special emphasis on automating the processes and combining them with an electrostatic transport and suspension system through the power plant target factory.

The MARK I boiling water reactor (BWR) containment system is comprised of a light-bulb-shaped reactor compartment connected through vent pipes to a torus-shaped and partially water-filled pressure suppression chamber, or the wetwell. During either a normally occurring safety relief valve (SRV) discharge or a hypothetical loss-of-coolant accident (LOCA), air or steam is forced into the wetwell water pool for condensation and results in hydrodynamically induced loads on the torus shell. An analytical program is described which employs the finite element method to investigate the influence of torus wall flexibility on hydrodynamically induced pressure and the resultant force on the torus shell surface. The shell flexibility is characterized by the diameter-to-thickness ratio which is varied from the perfectly rigid case to the nominal plant condition. The general conclusion reached is that torus wall flexibility decreases both the maximum pressure seen by the shell wall and the total vertical load resulted from the hydrodynamically induced pressure.

One organization's approach to designing complex, interrelated databases is described. The problems encountered and the techniques developed are discussed. A set of software tools to aid the designer and to produce an initial database design directly is presented. 5 figures.

The linear variable differential transformer (LVDT) is an electromechanical transducer which produces an ac voltage proportional to the displacement of a movable ferromagnetic core. When the core is connected to the cladding of a nuclear fuel rod, it is capable of producing extremely accurate measurements of fuel rod elongation caused by thermal expansion. The LVDT is used in the Thermal Fuels Behavior Program at the U.S. Idaho National Engineering Laboratory (INEL) for measurements of nuclear fuel rod elongation and as an indication of critical heat flux and the occurrence of departure from nucleate boiling. These types of measurements provide important information about the behavior of nuclear fuel rods under normal and abnormal operating conditions. The objective of the paper is to provide a complete account of recent advances made in LVDT design and experimental data from in-core nuclear reactor tests which use the LVDT.

In designing a plutonium-uranium core with thorium internal blankets there are several parameters that must be investigated to identify the design with the best performance. Choices include: the amount of moderation in the blanket, whether moderation is incorporated from the outset or added after an assembly is shuffled to the external blanket, and the cycle length both for the core and internal blanket assemblies. To investigate the effect of these parameters several core and blanket burnup analyses were performed.