The Stationary Low Power Reactor No. 1 is a three Mw boiling water reactor designed to demonstrate the feasibility of a nuclear reactor to supply electrical power and space heat for remote sites. In addition to performance evaluation the facility provides training for military personnel. The reactor was operated for 1159 hr during the quarter for a total core burnup of 20.3%. Power generation was 103.7 Mwd for a total power accumulation of 466.9 Mwd. Eight malfunctions occurred during the quarter for a total unscheduled downtime of 40 hr 44 min, As a result of malfunctions, aluminum keys will be installed on the control rod drives, instrument well covers were removed, and an order has been placed for a station auxiliaries breaker with a higher temperature rating. Data were taken on seven tests during the quarter. Four of these are expected to be completed during the next quarter. All equipment items on order for the SL-1 power extrapolation expansion program are scheduled to be delivered before June 15, 1960. Although condenser dampers and damper controls, process instrumentation, equipment cabinets, and the radiation monitoring equipment have not yet been ordered, construction will not be delayed. The two tie-ins to the existing …

The concentrations of and activities due to N/sup 16/ and N/sup 17/ in the HFIR primary coolant water were calculated. At the pressure vessel exit, the N/sup 16/ activity is 3.9 x 10/sup 6/ dis/secml and the N/sup 17/ activity is 6.9 x 10/sup 2/ dis/sec-ml. Comparison of the N/sup 16/ activity with the data obtained from the ORR water system indicates that the calculated results are slightly conservative. (auth)

Uniform, dense coatings of alumina about 5 to 150 mu thick were applied to uranium dioxide particles 44 to 350 mu in diameter by hydrolysis of aluminum chloride vapor in a fluidized bed of the particles at 1830 deg F. The coated particles were resistant to nitric acid leaching, to oxidation in 1830 deg F air, and to thermal cycling from 6OO to 2500 deg F. After low neutron exposures, the coated particles showed excellent fission-gas retention at temperatures up to 2400 deg F in inert gas. Although not optimized in the study, the coating process appears to have commercial feasibility. (auth)

Lengths of pistillate inflorescences of sedges (Carex spp.) growing in the contaminated soils of White Oak Lake bed were measured in relation to radiation fields. Carex Frankii Kunth and Carex vulpinoidea Michx. populations were sampled from areas with air dose rates of 0, 10, 20, and 40 mr/hr. Analyses of variance showed that mean lengths of inflorescences of C. vulpinoidea were simllar to each other in these areas but that those of C. Frankii were significantly different. However, the sites differ in such factors as soil moisture, fertility, and alkalinity, so that these differences in the length of inflorescence may not be accounted for primarily by the exposure dose rate of the radiation field. (auth)

Temperatures were calculated relative to the storage of radioactive solid waste as a function of time and radial distance for radioactive solid cylinders in infinite solid media of "average soil," "average rock," and salt. A resistance at the cylinder--infinite medium boundary was included in the form of an air space. For the range of parameters used and withia the practical limits of accuracy, the maximum temperature rise increased linearly with the heat generation rate. The fission product spectrum was not significant in the determination of the maximum temperature rise. Under the pessimistic storage conditions assumed, the storage of cylinders of a practical size appears feasible without excessive temperature rise. A maximum temperature rise of 1000 deg F would be produced with an initial heat generation rate of 1300 to 1600 Btu/hr-ft/ sup 3/ for cylinders with a 5-in. radius, with 350 to 450 Btu/hr-ft/sup 3/ for a 10-in. radius, and with 175 to 210 Btu/hr-ft/sup 3/ for a 15-in. radius, assuming a thermal conductivity of the radioactive cylinder of 0. 1 Btu/hr-ft- deg F. (auth)

None

From Introduction: "This Monograph has as its purpose the compilation and analysis of the extensive radio refractive index data available within the Central Radio Propagation Laboratory of the National Bureau of Standards. This will be accomplished by presenting both tabulations of basic data for specific locations and charts for interpolation to any location."

In some engineering applications it has become necessary to operate equipment containing small diameter rods or tubes oriented parallel to flow stream. In the case of several nuclear reactors such as the Plutonium Recycle Test Reactor and the S. S. Savannah Maritime Reactor, bundles of small diameter rods are used as the fuel elements. The situation also has application to heat exchangers. A method for accurately predicting the pressure drop characteristics of various bundle configurations would be helpful in the design and selection of equipment. Some progress has been made toward gaining a greater knowledge of the bundle characteristics under low temperature conditions. This report includes the development of relationship for the effect of temperature on pressure drop.

Tests were conducted to assure proper operation of the control-rod mechanisms of the Shippingport Pressurized Water Reactor under normal operating conditions. (C.J.G.)

Corrosion specimens of the five major aluminum alloys used in the construction of the Oak Ridge Research Reactor have been exposed to the high- purity primary cooling water in the ORR core and in the extennal portion of the primary cooling loop to determine their corrosion rates under actual operating conditions. These alloys, 1100, 3003, 5052, 5154. and 8061, exhibited average corrosion rates of less than 2.6 mpy during the first 500-hr test period and less than 0.5 mpy for a 4032-hr test. Very superficial pitting was observed. and no case of intergranular corrosion was found. (auth)

The design, fabrication, and installation of a fuel-element guide assembly for the Sodium Reactcr Experiment are described. Improvements in this assembly over other models are outlined, and recommendations for the testing of SRE core elements are presented. (T.F.H.)

Summary: Prototype testing of the safety and control rod drives indicated that both units functioned properly. No major problems were encountered during testing. Seal leakage data collected indicated that the seal units were performing satisfactorily. Scram times during both cold and hot testing were excellent and actually better than expected.

Some of the controllable variables have been investigated in casting of lead alloys having 0.06 to 0.09 wt.% Ca. The alloy has been found to respond to solution heat-treatment, room-temperature precipitation hardening, and accelerated hardening at 100 ts C. Tensile strengths to 7000 psi have been obtained. (auth)

The neutrons in an operating nuclear reactor are generated primarily by the fission events which are taking place. The great bulk of these relatively high energy or fast neutrons are slowed down or thermalized by a series of elastic collisions with the moderator nuclei which comprise the bulk of the volume of the reactor core. Once slowed down, the neutrons diffuse through the reactor core until they are absorbed or eliminated by some other process. Each of these three groups of neutrons, i.e., the fast or source neutrons, the intermediate or slowing down neutrons, and the slow or thermal neutrons, has a characteristic energy distribution. At a constant power level or rate of fissioning, an equilibrium is soon established among the groups at any point in the reactor. If it is assumed that a smooth transition exists between the different energy groups, it is possible to evaluate the entire neutron spectrum at a point in the reactor by determining the parameters which characterize each of the three groups. This has been done in the F Reactor Quickie Facility using radioactivants.

Preliminary engineering evaluations indicate that piping in the 105 B, D, F, DR, and H reactors has deteriorated to the extent that an increasing rate of component failure can be expected. In view of this, a budget submission was made in the FY-1962 P. A. and C budget and has been included in the I.P.D. Plant Improvement Program. The purpose of this report is to substantiate the need for this program and to review information generated during the past three years concerning the condition of rear face piping and hardware. This review includes the history of rear face piping and hardware problems, study activities undertaken to date to ascertain the condition of the components, action taken to correct actual component failures, programs recommended to correct deficiencies which operating experience and engineering judgement indicate are necessary, and programs to accumulate additional information to support design of new piping and hardware components.

Steady state hydraulic demand curves were obtained for tube powers of 500, 1000, 1500 and 2000 KW with an inlet water temperature of 20C and a rear header pressure of 25 psig. These curves are shown in figures. The point of initial unstable flow for various tube powers is shown for a front header pressure of 325 psig. The flow rate that would lead to the initial point of unstable flow as a result of a sudden plug upstream of the Panellit tap is shown in a figure.

The chemical vapor deposition of niobium, molybdenum, tungsten, chnomium, carbcn, and niobium--vanadium alloys in a fluidized bed of UO/sub 2/ powder particles wss used to provide uniform, dense, nonporous coatings on the individual particles. in the case of niobium, which received major attention, hydrogen reduction of niobium pentachloride vapor was used as the vapor- deposition reaction. The most serious problem was that of maintaining bed fluidity aad avoiding agglomeration. This problem was overcome to permit routine operation of the coating equipment. In the entire program of 68 experimental runs, only 1.1 per cent of the product was lost by agglomeration. In routine operation, this loss should be even lower. (auth)

A helium coolant side-stream purification system consisting of parallel sections for radioactive and nonradioactive decontamination was designed for the proposed Pebble Bed Reactor Experiment. Primary equipment components are two gas coolers, gas heater, charcoal delay trap, CuO oxidizer, molecular sieve adsorber, and full flow filter. The charcoal delay trap is sized to provide a hold-up of 30 min for Kr isotopes. 6 hr hold-up for Xe isotopes, and 99.9% retention of iodine isotopes resulting in "decontamination factors" varying from 1 for Kr/sup 85/ to 556 for I/sup 131/. Nonradioactive decontamination will result in a steady state concentration of CO/sub 2/ in the coolant of 20.8 ppm or less. Total cost of the system excluding auxiliary equipment and containment is estimated to be .690. (auth)

A helium coolant side-stream purification system consisting of parallel sections for radioactive and non-radioactive de-contamination was designed for the proposed Pebble Bed Reactor Experiment. Primary equipment components are two gas coolers, gas heater, charcoal delay trap, CuO oxidizer, Molecular Sieve adsorber, and full flow filter. The charcoal delay trap is sized to provide a hold-up of 30 minutes for Kr isotopes, 6hr hold-up for Xe isotopes, and 99.9% retention of iodine isotopes resulting in "de-contamination factors" varying from l for Kr85 to 556 for I131. Non-radioactive de-contamination will result in a steady state concentration of CO2 in the coolant of 20.8ppm or less.

The saturation voltage and current characteristics of a compensated ionization chamber (Q-1045) were measured with special regard to high current and voltage ranges. The chamber can be operated at currents up to I ma with a 2000 volt power supply. (auth)

A wave equation for the pressure in a mixture of water and gas bubbles (such as found in the KEWB Reactor) is derived. The driving force may be either the production of additional bubbles or the growth of existent bubbles. Several illustrative solutions to the wave equation are found. (W.L.H.)

The following report describes the injection and trapping of high current electron beams in order to construct an electron gun and the first 2 Mev section of the accelerator.

During the report period, the nature of the ORNL supporting activities gradually changed, reflecting the progress in the conetruction of the N.S. Savannah. Design reviews continued to require considerable attention. The Inspection Engineering Dept. of the Jab. continued to act as an inspection agency for the ALC, witnessing inspections and tests during fabrication of components of the nuclear reactor system. An enviromnental analysis was made of safeguard aspects of operation of the N.S. Savannah at the NYSC site in Cannden. A study of the safety response of the reactor on the ORNL Analog Computer further defined the important role of the Doppler coefficient in controlling reactivity excursions. Health physics aspects of the operation were studied. Limited waste disposal studies indicated that sea disposal of exhausted demineralizer resins may be facilitated by casting the radioactive resins into concrete. Installation of a pressurized-water in-pile test loop in the ORR neared completion. The neutron flux distribution in the loop was determined by experimental measurements in a nuclear mockup of the in-pile section. Metallurgical activities included nil-ductility testing of steel from the reactor vessel, chemical analyses of primary system components, and investigations of the properties of electroless - nickel brazed joints. Limited fabrication studies …

The formation of heavy negative ions by the attachment of low-energy electrons to oxygen molecules was studied for small amounts of oxygen mixed with methane or carbon dioxide. The rate of attachment in both cases was found to depend on the electron energy, the pressure of the oxygen and the non-attaching gas, and on the kind of non-attaching gas. In general, the attachment increases as electron enprgy decreases or as either oxygen or total pressure increases. The value of the attachment coefficient in oxygencarbon dioxide mixtures is about 100 times its value in oxygen-methane mixtures. This large difference is probably due in part to differences in electron energy and partly to differences in the stabilizing qualities of the two molecules. Dissociative attachment, which should be pressure independent, does not occur at the low energies that were used in this work. Both methane and carbon dioxide are to differences in the stabilizing qualities of the two molecules. Dissociative attachment, which should be pressure independent, does not occur at the low energies that were used in this work. Both methane and carbon dioxide are sometimes used as filling gases for Geiger and proportional counters. The high sensitivity of carbon dioxide to oxygen …