From Abstract: "A recirculating high-pressure stainless steel loop was developed for the study of heat transfer from small-bore tubes to supercritical water. It was found that under certain conditions, hot spots developed on the test section. The conditions leading to the formation of hot spots were investigated; the results of several runs are tabulated here."

From abstract: "A recirculating high-pressure stainless steel loop was developed for the study of heat transfer from small-bore tubes to supercritical water. It was found that under certain conditions, hot spots developed on the test section. The conditions leading to the formation of hot spots were investigated; the results of several runs are tabulated here."

Technical report covering the work done to explore heat transfer analytically and experimentally in liquid metals in turbulent flow within the thermal entrance region of circular tubes having uniform well temperature. Includes implications of this research. [From Summary]

From introduction: "This report is an attempt to examine, semiquantitavely, the way the competition between neutron emission and fission varies for heavy nuclei as a function of nuclear type and excitation energy. Many of the ideas herein are the results of discussions with R. H. Goeckermann and W. Heckrotte of the University of California Radiation Laboratory."

This is a progress report of the production reactors on the Hanford Reservation for the month of January 1954. This report takes each division (e.g., manufacturing, medical, accounting, occupational safety, security, reactor operations, etc.) of the site and summarizes the accomplishments and employee relations for that month.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification: Proper appropriation year against which refund of Judiciary Retirement System contributions should be charged.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification: Authority to refund monies under Article 4388, V.C.S., when the monies were paid to the State pursuant to the protest statute. Article 7057b, V.C.S., and the protesting taxpayer failed to observe the requirements of the protest statute.

This document presents a summary of work and progress at the Hanford Engineer Works for September 1954. The report is divided into sections by department. A plant wide general summary is included at the beginning of the report, after which the departmental summaries begin. The Manufacturing Department reports plant statistics, and summaries for the Metal Preparation, Reactor and Separation sections. The Engineering Department`s section summaries work for the Technical, Design, and Project Sections. Costs for the various departments are presented in the Financial Department`s summary. The Medical, Radiological Sciences, Utilities and General Services, Employee and Public Relations, and Community Real Estate and Services departments have sections presenting their monthly statistics, work, progress, and summaries.

Two arrangements of internal components of a freeze seal model were tested in order to determine the hydraulic characteristics. The internal configuration employing cylindrical knitted mesh packings in the connecting pipes proved the most suitable for the Na servicing freeze seal, because these packings are more easily fabricated. (auth)

Report presenting an investigation of the longitudinal aerodynamic characteristics of a model with a 45 degree sweptback wing of aspect ratio 3 and a 45 degree sweptback cruciform tail at transonic speeds and small angles of attack by a free-fall recoverable-model technique. Results regarding lift, drag, static longitudinal stability, dynamic longitudinal stability, and loading distribution over the fuselage are provided.

Report presenting the results of force and moment tests at Mach numbers from 3.0 to 6.3 on bodies of revolution of fineness ratios from 5 to 10 and on flat-bottom bodies of fineness ratio 10 along with theoretical predictions for these bodies. Testing included eight cone and cone-cylinder models, six nose-cylinder models, and three flat-bottom bodies.

Report discussing testing of a model of the Douglas A4D-1 to determine its low-speed yawing stability derivatives. The model was tested in clean and landing configurations with horizontal and vertical tails on and off and an investigation into the effect of slats and flaps on the wing-alone derivatives.

Report presenting a flight investigation of a rocket-launched ram-jet engine incorporating an end-burning solid fuel. Results regarding acceleration, altitude, booster separation, survival time of booster adapter, and air specific impulse are provided.

Pressure distributions and forces for a series of four bodies of revolution having nose-fineness ratios varying from 4 to 10 have been obtained and compared with theory for a Mach number of 3.12, a Reynolds number range of 2x10(sup)6 to 14x10(sup)6, and angles of attack from zero to 9 degrees. In general, a comparison of the experimental data with a second-order theory showed good agreement for the range of variables investigated.

Report presenting measurements of average heat-transfer and friction coefficients obtained with air flowing through electrically heated ducts with square, rectangular, and triangular cross sections for a range of surface temperatures and Reynolds numbers. Results regarding heat balances, correlation of heat-transfer coefficients, correlation of friction coefficients, and correlation of peripheral temperature variations are provided.

Report presenting an investigation in the transonic blowdown tunnel between Mach numbers of 0.65 and 1.4 to determine whether the principles of the transonic area rule could be used to improve the transonic drag-rise characteristics of a semielliptical shaped sweptback air inlet installed in the root of a sweptback wing-body combination. Results regarding the effect of the inlet and the interaction of Mach number and drag coefficient are provided.

Report presenting the effects of nacelle location on the zero-lift drag of 45 degree sweptback wing-body combinations with boattail and cylindrical afterbodies at a range of Mach and Reynolds numbers. The nacelles were located at three different areas and the afterbody shape was also altered by replacing the boattail afterbody with a cylinder. Results regarding faired curves of the variations of total drag, base drag, and fin drag coefficients, and applicability of the transonic area rule are provided.

Memorandum presenting an investigation of two-dimensional, supersonic cascade-type inlets at a free-stream Mach number of 3.11. Two cascade-type inlets utilizing different methods of internal-flow compression were designed and tested. Results regarding the cascade inlet and stepped-cascade inlet are provided.

Report presenting the effect on base pressure of bleeding air to the semidead-air region at the trailing edge of two-dimensional blunt-trailing-edge airfoils at two Mach numbers. Variation of base pressure with base-bleed rate was determined for two airfoils profiles with both laminar and turbulent boundary layers approaching the trailing edge. Results regarding the effects of jet geometry, effects of jet area, effect of base bleed on the flow in the wake, effect of angle of attack, effect of Reynolds number, correlation of the results with mass-flow rate of the bleed air, and effect of base bleed on the drag of blunt-trailing-edge airfoils are provided.

"Aerodynamic data have been obtained for a 45-degree sweptback wing-body-canopy configuration at transonic speeds with the canopy placed on the body so that the cross-sectional area of the canopy approximately filled the concave portion of the basic wing-body cross-sectional-area distribution curve (design location) and with the canopy placed 0.0614 of the body length forward of the design location. Data have also been obtained for the basic wing-body combination. Placing the canopy in the rear position significantly reduced the drag of the configuration at transonic speeds, increased the lift, and did not appreciably affect the slope of the pitching-moment curve" (p. 1).

Pressure distributions were measured over rectangular wings of aspect ratio 2 and triangular wings of aspect ratios 2 and 4 at Mach numbers of 1.45 and 1.97. The investigation includes some comparison of the effects of Reynolds number and of thickening the wing root sections on the loading.

Report presenting an investigation of stores on the Douglas D-558-II research airplane in the wind tunnel and in flight using various store configurations. The drag measured for all store configurations was high, from two to three times the free-air drag estimated for the store and pylon. Results regarding longitudinal characteristics and lateral characteristics are provided.

Report presenting an investigation of combustion oscillations using white fuming nitric acid and a hydrocarbon fuel in a 1000-pound-thrust rocket engine. Results regarding rotary oscillation shown by 40,000-frame-per-second photographs, oscillations recorded by streak photography, ion gap traces, pressure measurements, and plastic chamber erosion are provided.

Memorandum presenting an analysis to determine the compressor pressure ratios and specific weight flows obtainable with single-stage air-cooled turbines for both nonafterburning and afterburning turbojet engines operating at a flight Mach number of 2 in the stratosphere. Wide ranges in turbine-inlet temperature, tip speed, hub-tip radius ratio, and coolant-flow ratio were considered.