This progress report discusses the work during the fourth quarter of 1951. During this quarter, "the uranium raw materials program at ORNL has been devoted to studies of uranium chemistry and to the development of processes for deriving uranium and byproducts from various types of ores" (From introduction).

Technical report covering the work done to explore heat transfer analytically and experimentally in liquid metals in turbulent flow within the thermal entrance region of circular tubes having uniform well temperature. Includes implications of this research. [From Summary]

From abstract: "This report summarizes the corrosion data obtained for nine construction materials located throughout the ORNL Purex Pilot Plant Acid Recovery Unit during seven hundred hours of operation."

Technical report containing the general arrangement of the Low Intensity Training Reactor and outcomes of experiments that have been performed in the reactor to measure the rate of fission product heat dissipation from the fuel pieces after loss of water. [From Summary, Introduction]

This memorandum is the first in a series reporting progress in the program of critical experiments in the ORNLArmy Package Power Reactor Project. The critical assembly, designated as CA-25, is analogous to the APPR design core and consists of 45 fuel boxes, in a 7 x 7 array with the corners removed, contaIned in a large water tank. Two sides of each box are slotted for the insertion and positioning of any desired loading of eighteen plates of fuel, structural material, and poison. The array is submerged in water to provide a moderated and reflector. Enriched uranium metal, in two-mil-thick foils 2.5 x 22 in, is encased in type 304 stainless steel sheets, 2.7 x 23 x 0.0105 in., to form fuel plates. Stainless steel plates, 2.7 x 23 x 0.025 in. are used to simulate additional steel in the APPR core. It is, therefore, possible to maintain an essentially constant metal to water ration in the assembly when the fuel content is varied. The fuel is distributed as uniformly as possible in all boxes and a symmetrical distribution of materials is maintained in the core at all times. Fuel plates containing half-width (1.25 in) uranium foils are provided for …

Report issued by the Oak Ridge National Laboratory discussing semiannual progress made by the Instrumentation and Controls Division. Descriptions of progress and studies conducted are presented. This report includes illustrations, and photographs.

Report issued by the Oak Ridge National Laboratory discussing revisions to previously issued conversion coefficient tables. The revised tables are presented. This report includes tables, and graphs.

Report issued by the Oak Ridge National Laboratory discussing aqueous homogeneous reactors used in central-station power. As stated in the introduction, "it contains an evaluation of the potentiality of producing power only, as exhibited by aqueous homogeneous systems" (p. 6). This report includes tables, and illustrations.

Electrodialysis in an ion-exchange membrane cell was shown to be technically feasible for the concentration of an azeotropic mixture of HF and water. A flowsheet is presented for recovery of anhydrous HF by distillation and electrodialysis of the azeotropic residue. In the electrodialysis step, 2.6 kwhr of energy per pound of anhydrous product was consumed, with electricity at 1¢ per kilowatt-hour, the total operating cost of the electrodialysis equipment alone, including amortization, would be 6¢ per pound of HF.

This progress report discusses new additions to the Mathematics Panel and discusses new and further work happening at Oak Ridge National Laboratory relating to the Mathematics Panel, of particular note is the Oak Ridge computer which is being fabricated at Argonne National Laboratory and the Technitrol Company.