The results of an experimental pilot study on the location time, for a sequence of N specified positions on a panel, are given for 1 <_ N <_ 30. The positions to be located were randomly arranged on one set of panels and arranged according to an ordering scheme on a second set of panels. Th location time for N positions randomly arranged on a panel varies approximately as N(2). In the case of an order arrangement the location time is essentially proportional to N. Even for as few as 30 positions, the location time for an random arrangement was twelve times greater than for an order panel. For 60 positions the ratio would be 19, and for 90 positions the ratio would be 26.

An active program is a present underway to develop equipment to handle liquid metals. Among the metals being studied are sodium and sodium--potassium alloy (the latter commonly referred to as NaK). In many of the systems being studied this liquid metal is pressurized by inert gas in the lines. At times it is necessary to bleed off some of this gas from the system. Although the gas is allowed to escape at a temperature at which the vapor pressure of sodium is extremely small, it has been found that excessive amounts of sodium are present in this gas stream. Either this sodium collects in the lead-off pipes from the system as a solid, threatening to block the passage in which it is found, or it passes out into the atmosphere. In order to explain the presence of such a dangerous concentration of sodium in the exit gas stream, it has been proposed that the sodium vapor present in the the system at high temperatures condenses into a mist or aerosol on cooling. This aerosol is stable and will not readily de-entrain or condense onto the surfaces over which it passes. Another possibility is that the oxygen present with the inert …

The status of research is reviewed in a study of pulmonary granulomatosis in beryllium workers. Equipment for use in dust exposure studies is described. Preliminary results are reported from studies on the tissue distribution and pathological effects of beryllium dust in rats; the physical chemistry of solutions of beryllium salts; the effects of beryllium on enzyme systems, and the effects of ascorbic acid on beryllium excretion.

The non-project literature concerning the chemistry of vanadium has been summarized through November, 1952. The report is presented in terms of izo- and heteropoly vanadates and cationic forms of pentavalent vanadium, complexes of di-, tri-, and pentavalent vanadium, and oxidation potentials of various vanadium systems. A bibliography of 93 references is included.

" A reliable, efficient and economical method is needed to remove radioactive halogens such as iodine and bromine and particulates from air in many atomic energy installations. One method we have developed which is particularly suited to reactor containment vessels or other large confined areas is foam containment. In this method an ether lauryl sulfate foam containing an iodine reactant is generated, rapidly filling the entire containment volume. This provides a tremendous surface area to which the encapsulated gases and particles can diffuse and be removed."

Discussing the occurrence of uranium in the Kelso Valley area in Kern County, California

A buncher and pre-accelerator for A-12 is described that has 360 degree acceptance and could handle a current of one ampere from a low voltage source.

An R.F. joint tester was designed to determine the relative heating and tendency toward arching at high RF current density (100 amps/linear inch) of a 12 inch diameter circular copper butt joint in vacuum with several types of inserts and at various amounts of axial loading, ranging from a very small contact pressure to one of 1400 pounds per linear inch of joint.

The study was undertaken with the objective of observing the distribution in the rat of organic compounds of phosphorus labelled with the P32 isotope as tracer. The fate of several of these compounds was studied in animals bearing tumors. The distribution of inorganic phosphate in animal tissues is well known but was included in this work for comparison with the organic phosphorus compounds.

Technical report. From Abstract : "The silver-1,10-phenanthroline system has been studied and the stability constants determined for the 1:1 and 2:1 complexes using the silver electrode. This known system was then used to study the complexes of 1,10-phenanthroline with other metals. The log βn values found for the over-all stoichiometric stability constants are as follows: Ag, 5.02, 12.07; Mn, 3.88, 7.04, 10.11; Cd, 5.93, 10.52, 14.30; Zn, 6.83, 12.05, 16.92. The stoichiometric stability constants determined for copper are log k2 = 6.42 and log k2k3 = 11.05."

Technical report. From Introduction : "The nuclear volume dependent isotope shift of optical spectral lines has long been a very useful means for studying the changes in the nuclear size or shape for different isotopes of heavy elements."

Quarterly progress report on various research projects conducted at the University of California Radiation Laboratory.

Three types of stainless steel (309 SCB, Carpenter 20, 304-L) were exposed to both the liquid and vapor phase of each of three types of solutions. The time of exposure totaled ten days during which the specimens were cleaned and weighed periodically. The three synthetic D-12 waste solutions contained respectively chrome-high chloride, chrome-low chloride and high chloride sans chromium. The solutions were renewed at each weighing.

An improved method for the determination of boron in plutonium is reported. Precipitation of plutonium (III) acid oxalate prior to color development with curcumin results in increased precision, greater speed, and lower costs. Results are presented of a statistical study involving all variables.

This technical report discusses an infrared study of AlH3-2N(CH3)3 while the compound was in its gas phase. This investigation was then extended to include the Raman spectrum observed in liquid trimethylamine.

Abstract: The most adverse power distribution and power peaking factors have been developed for Type 3 replacement cores for SM-1, SM-1A, and PM-2A. Also included is the 37 element Type 3 core for SM-1, which is known as SM-1 Core III and is a prototype of a Type 3 core for PM-2A. The power distributions were compared with measured distributions obtained on type 3 fuel elements in SM-1, SM-1A and PM-2A core configurations. Using the measured data as a standard, correction factors were obtained and applied to the analytical predictions of the most adverse power distribution.

Abstract: Progress is reported on research and development tasks under the Program Plan for Engineering Support and Development of Army Pressurized Water Reactor Power Plants, Contract AT(30-1)-2639, during the six months' period October 1, 1061 to March 31, 1962.

Abstract: An analysis and a summary are.given of the radioactivity buildup program at the Army Package Power Reactor during the last nine months. · Due to the wide fluctuation of water and crud results, only general interpretations can be made with this data. Metal test coupon data indicate a substantially greater buildup on Croloy 16-1 metal than on Type 304 stainless steel. Coupled with the decreased ability to remove the radioactivity buildup on Croloy 16-1 by conventional descaling techniques, the implication is that this metal might pose a serious problem for use as steam generator material. It was emphasized, however, that results to date ae only preliminary and extensive additional experimentation would be required to reach more definite conclusions.

Introduction: Seldom does the actual arrangement of control elements in a nuclear reactor confers to the ideal and convenient mathematical array. In order to achieve shim control. safety and regulation, it is desirable to design with rods of different sizes and materials. With given fuel element arrangement, typically in square or hexagonal lattice spacing, there will be rods located at different distances form the center of the core and from each other. As the reactor operates, absorbers will be withdrawn, leaving further asymmetries in the location of those remaining. It is the purpose of this report to develop in detail a two-group diffusion theory with as complete generality as possible. The method is as yet restricted to the unreflected core, or to the reflected core by use of reflector savings and bare equivalent geometries.

Summary: Prototype testing of the safety and control rod drives indicated that both units functioned properly. No major problems were encountered during testing. Seal leakage data collected indicated that the seal units were performing satisfactorily. Scram times during both cold and hot testing were excellent and actually better than expected.

Abstract: "Production of [rho]'s and [omega]'s in [pi]- + p and p + [letter p with a bar over it] interactions is discussed. The [rho] is presumably a J = 1-, 1 = 1 state and thus can decay into 2[pi]'s via a strong coupling. The [omega] is probably J = 1-, 1 = 0 which can also decay into 2[pi]'s via electromagnetic coupling. A theoretical description of this situation is presented in terms of coupled time-dependent Schroedinger equations which mix [rho] and [omega] states that are assumed to be isotopically pure at the time of production. The interference between the two resonances was found to have the effect of extending the 2[pi] spectrum toward the [omega] mass."

This progress report discusses the work during the fourth quarter of 1951. During this quarter, "the uranium raw materials program at ORNL has been devoted to studies of uranium chemistry and to the development of processes for deriving uranium and byproducts from various types of ores" (From introduction).

Technical report covering the work done to explore heat transfer analytically and experimentally in liquid metals in turbulent flow within the thermal entrance region of circular tubes having uniform well temperature. Includes implications of this research. [From Summary]

From abstract: "This report summarizes the corrosion data obtained for nine construction materials located throughout the ORNL Purex Pilot Plant Acid Recovery Unit during seven hundred hours of operation."