None

None

The SPARC project has entered its installation phase at the Frascati National Laboratories of INFN: its main goal, the promotion of an R&D activity oriented to the development of a high brightness photoinjector to drive SASE-FEL experiments, is being vigorously pursued by a collaboration among ENEA-INFN-CNR-Universita di Roma Tor Vergata-INFM-ST. In this paper we will report on the installation and test of some major components, like Ti:Sa laser system, RF gun and RF power system. Advancements in the control and beam diagnostics systems will also be reported, in particular on the emittance-meter device for beam emittance measurements in the drift space downstream the RF gun. Recent results on laser pulse shaping show the feasibility of producing 10 ps flat-top laser pulses in the UV with rise time below 1 ps. First FEL experiments have been proposed, using SASE, seeding and non-linear resonant harmonics.

Common ceramic component manufacturing typically involves the processing of the raw materials in powder form. Granulated powder is formed into a green body of the desired size and shape by consolidation, often by simply pressing nominally dry powder. Ceramic powders are commonly pressed in steel dies or rubber bags with the aim of producing a near-net-shape green body for subsequent sintering. Density gradients in these compacts, introduced during the pressing operation, are often severe enough to cause distortions in the shape of the part during sintering due to nonuniform shrinkage. In such cases, green machining or diamond grinding operations may be needed to obtain the desired final shape and size part. In severe cases, nonuniform shrinkage may even cause fracture in the parts during sintering. Likewise, density gradients can result in green bodies that break during ejection from the die or that are too fragile to be handled during subsequent processing. Empirical relationships currently exist to describe powder compaction but provide little understanding of how to control die design or compaction parameters to minimize density gradients thereby forcing the designer to use expensive and time consuming trial and error procedures. For this reason, interest has grown in developing computational tools …

The authors present improved measurements of the branching fraction and CP asymmetry for the process B{sup {+-}} {yields} {rho}{sup {+-}}{pi}{sup 0}. The data sample corresponding to 211 fb{sup -1} comprises 232 million {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. The yield and CP asymmetry are measured using an extended maximum likelihood fitting method. The branching fraction and Cp asymmetry are found to be {Beta}(B{sup {+-}} {yields} {rho}{sup {+-}}{pi}{sup 0}) = [10.2 {+-} 1.4(stat) {+-} 0.9(syst)] x 10{sup -6} and {Alpha}{sub CP}(B{sup {+-}} {yields} {rho}{sup {+-}}{pi}{sup 0}) = -0.01 {+-} 0.13(stat) {+-} 0.02(syst).

Since the U. S. Department of Energy (DOE) published the DOE Beryllium Rule (10 CFR 850) in 1999, DOE sites have been required to measure beryllium on air filters and wipes for worker protection and for release of materials from beryllium-controlled areas. Measurements in the nanogram range on a filter or wipe are typically required. Industrial hygiene laboratories have applied methods from various analytical compendia, and a number of issues have emerged with sampling and analysis practices. As a result, a committee of analytical chemists, industrial hygienists, and laboratory managers was formed in November 2003 to address the issues. The committee developed a baseline questionnaire and distributed it to DOE sites and other agencies in the U.S. and U.K. The results of the questionnaire are presented in this paper. These results confirmed that a wide variety of practices were in use in the areas of sampling, sample preparation, and analysis. Additionally, although these laboratories are generally accredited by the American Industrial Hygiene Association (AIHA), there are inconsistencies in performance among accredited labs. As a result, there are significant opportunities for development of standard methods that could improve consistency. The current availabilities and needs for standard methods are further discussed in …

In the January 2002 edition of SIAM News, Nick Trefethen announced the '$100, 100-Digit Challenge'. In this note he presented ten easy-to-state but hard-to-solve problems of numerical analysis, and challenged readers to find each answer to ten-digit accuracy. Trefethen closed with the enticing comment: 'Hint: They're hard! If anyone gets 50 digits in total, I will be impressed.' This challenge obviously struck a chord in hundreds of numerical mathematicians worldwide, as 94 teams from 25 nations later submitted entries. Many of these submissions exceeded the target of 50 correct digits; in fact, 20 teams achieved a perfect score of 100 correct digits. Trefethen had offered $100 for the best submission. Given the overwhelming response, a generous donor (William Browning, founder of Applied Mathematics, Inc.) provided additional funds to provide a $100 award to each of the 20 winning teams. Soon after the results were out, four participants, each from a winning team, got together and agreed to write a book about the problems and their solutions. The team is truly international: Bornemann is from Germany, Laurie is from South Africa, Wagon is from the USA, and Waldvogel is from Switzerland. This book provides some mathematical background for each problem, and …

Most large-scale high-critical-temperature superconductor applications require wires or tapes that an carry high currents in applied magnetic fields. This report describes technical progress of research and development efforts aimed at producing superconducting components and devices in the Y-Ba-Cu-O and Bi-(Pb)-Sr-Ca-Cu-O systems. Topics discussed are formation of first- and second-generation composite conductors, characterization of structures and superconducting and mechanical properties, modeling of grain-boundary current transport, and fabrication and analysis of prototype components.

This Pacific Northwest National Laboratory (PNNL) OS3300 Alpha/Beta Monitoring System Software and Hardware Operations Manual describes how to install and operate the software and hardware on a personal computer in conjunction with the EG&G Berthold LB150D continuous air monitor. Included are operational details for the software functions, how to read and use the drop-down menus, how to understand readings and calculations, and how to access the database tables.

This report compiles the presentations made at the 1999 Photovoltaic Performance and Reliability Workshop, held on October 18-21, 1999, in Vail, Colorado. The theme of the workshop was ''Setting a Standard for PV Performance and Reliability,'' with the focus on testing, test methods, evaluation, and standards. The workshop provided a venue for technical discussions on four topical areas: module rating, module qualification, power processing, and systems. Includes the following. (1) Module Performance Rating. IEEE PAR 1479 ''Draft Recommended Practice for the Evaluation of Photovoltaic Module Energy Production'' - proceed with validating the models and inputs; look closely at the need to develop a similar activity for system energy rating. (2) Module Qualification Testing. IEEE Std.1262 ''Recommended Practice for Qualification of PV Modules'' - continue validation of proposed new qualification tests at NREL, ISPRA, and US PV industry and test lab facilities. Reliability testing should be done and should include module qualification. (3) Power Processing. The most pressing concerns expressed by individuals included system design and system components integration aspects; reliability assurance; interconnection and the need for a uniform, national approach; testing; and, infrastructure development. (4) Systems Evaluation. The most pressing concerns reiterated the concerns in the power processing session. IEEE …

This report summarizes statutory authorities regarding access by the government, for wither foreign intelligence or law enforcement purposes, to information related to telephone calling patterns or practices. Where pertinent, it also discusses statutory prohibitions against accessing or disclosing such information, along with relevant exceptions to those prohibitions.

This report presents background information on the commission's findings, on emergency response standards, and on options Congress might consider to address issues related to emergency preparedness standards.

Atomic physics of high-Z, heavy ions is very different from that encountered in low-Z or medium-Z ions. The reason is the ultra strong nuclear field found only in the heaviest ions. The highest-Z atomic systems available to physical investigation, the actinides, therefore, offer rich new physics that cannot be studied any other way. This ranges from new dominating forces in electron-ion collisions to tests of fundamental theories. A measurement of the two-loop Lamb shift in uranium is by many considered to be the ''holy grail'' of high-field QED tests of atomic systems. Such measurements have been attempted at heavy-ion accelerator facilities but have yet to succeed because of the difficulty to make measurements with the required accuracy. Also, electron collisions behave very differently in such tightly bound systems. The magnetic interaction between the ion and the incoming free electron (the so-called generalized Breit interaction) is essentially non-existent in collisions involving low and medium-Z ions. This interaction is therefore missing in essentially all electron collision codes. But in heavy, highly charged ions like uranium, the generalized Breit interaction readily is the dominant force, changing electron collision cross sections by a factor of two. This has never been experimentally observed. In fact, …

High-end supercomputers are increasingly built out of commodity components, and lack tight integration between the processor and network. This often results in inefficiencies in the communication subsystem, such as high software overheads and/or message latencies. In this paper we use a set of microbenchmarks to quantify the cost of this commoditization, measuring software overhead, latency, and bandwidth on five contemporary supercomputing networks. We compare the performance of the ubiquitous MPI layer to that of lower-level communication layers, and quantify the advantages of the latter for small message performance. We also provide data on the potential for various communication-related optimizations, such as overlapping communication with computation or other communication. Finally, we determine the minimum size needed for a message to be considered 'large' (i.e., bandwidth-bound) on these platforms, and provide historical data on the software overheads of a number of supercomputers over the past decade.

This report discusses legislative initiatives to address the challenges facing the U.S. Intelligence Community in the 21st century.

The purpose of this design analysis and calculation is to determine the demand for domestic cold water and to size the supply main for the Shop Building No.5006 in accordance with the Uniform Plumbing Code (UPC) (Section 4.4.1) and the U.S. Department of Energy, Order 6430.1A-1540 (Section 4.4.2).

This report describes the structure and development of the narcotics trade in Afghanistan and explores its relevance to Afghan, U.S., and international security interests, including the 9/11 Commission’s recommendation that the United States make a long term commitment to the stability and security of Afghanistan. The report provides current statistical information on the opium trade, profiles its various participants, explores alleged narco-terrorist linkages, and reviews the U.S. and international policy response since late 2001. The report also considers current policy debates regarding the role of the U.S. military in future counternarcotics operations in Afghanistan; planned opium poppy eradication; and funding issues for Congress.

This report includes a historical background of the Sunni-Shiite split and the differences in religious beliefs and practices between and within each Islamic sect as well as their similarities.

This report provides a background on Wahhabi Islam and its association to militant fundamentalist groups; it also summarizes recent charges against Wahhabism and responses, including the findings of the final report of the 9/11 Commission and bills relevant to this issue in the second session of the 109th Congress.

This report provides background information on Libya and U.S.-Libyan relations; profiles Libyan leader Muammar al Qadhafi; discusses Libya’s political and economic reform efforts; and reviews current issues of potential congressional interest.

This is the eighth Quarterly Technical Report for DOE Cooperative Agreement No: DE-FC26-00NT41047. The goal of the project is to develop and demonstrate a computational workbench for simulating the performance of Vision 21 Power Plant Systems. Within the last quarter, good progress has been made on all aspects of the project. Calculations for a full Vision 21 plant configuration have been performed for two coal types and two gasifier types. Good agreement with DOE computed values has been obtained for the Vision 21 configuration under ''baseline'' conditions. Additional model verification has been performed for the flowing slag model that has been implemented into the CFD based gasifier model. Comparisons for the slag, wall and syngas conditions predicted by our model versus values from predictive models that have been published by other researchers show good agreement. The software infrastructure of the Vision 21 workbench has been modified to use a recently released, upgraded version of SCIRun.

Worldwide data on terrorist incidents between 1968 and 2004 gathered by the RAND corporation and the Oklahoma City National Memorial Institute for the Prevention of Terrorism (MIPT) were assessed for patterns and trends in morbidity/mortality. The data involve a total of 19,828 events, 7,401 ''adverse'' events (each causing {ge}1 victim), 91,346 cases of casualty (either injury or death) and 25,408 deaths. Analyses revealed a number of interesting patterns and apparently significant trends. Most terror-related adverse events, casualties and deaths involved bombs and guns. Weapon-specific patterns and terror-related risk levels in Israel (ISR) have differed markedly from those of all other regions combined (AOR). ISR had a fatal fraction of casualties about half that of AOR, but has experienced relatively constant lifetime terror-related casualty risks on the order of 0.5%--a level 2 to 3 orders of magnitude more than those experienced in AOR, which have increased {approx}100-fold over the same period. Individual event fatality has increased steadily, the median increasing from 14 to 50%. Lorenz curves obtained indicate substantial dispersion among victim/event rates: about half of all victims were caused by the top 2% (10%) of harm-ranked events in OAR (ISR). Extreme values of victim/event rates were found to be well …

The DOE has identified a need to sample vapor space and exhaust ducts in waste tanks that store radioactive waste. This document provides the Design Compliance Matrix (DCM) for the Type 4 In-Situ Vapor Sampling (ISVS) system that is used for completing this sampling function. The DCM identifies the design requirements and the source of the requirements for the Type 4 ISVS system. DCMs are a single-source compilation design requirements for sampling and sampling support equipment and support the configuration management of these systems.

This report considers how the Air Force is changing itself to meet new defensive needs. The issues for Congress on this are mostly budgetary and how effective it will be.