In considering the problems associated with the measurement of SSNM content of Non-Production Fuels, two distinct problems are apparent. The first is the technical problem of obtaining highly accurate measurements in a complicated chemical and physical system. The second is the administrative problem of choosing a measurement system which provides a basic of financial settlement acceptable to both the seller (reactor operator) and the buyer (Commission).

This is a report of what may be an invention in the preparation of uranium dioxide of a quality particularly useful for the fabrications of fuel elements for nutronic reactors.

Information was desired on applicability of seismic methods of geophysical exploration in helping to better define and refine hydrological and geological factors affecting ground disposal of liquid radioactive wastes. To date most of information on the area geology has been obtained from surface mapping and well drilling, although it has long been recognized that geophysical techniques may greatly assist in defining the geology of the region. Although direct measurements are generally preferred to indirect measurements have proven extremely valuable in many applications. Careful analysis of field data from geophysical measurements, and correlation with known geologic conditions, should provide significant knowledge of earth formations. Geophysical methods do not directly determine depth, type and composition of underground earth materials, but rely rather on detecting differences in physical properties (elastic wave velocity, magnetic susceptibility, density or electrical resistivity) of such earth materials.

In some engineering applications it has become necessary to operate equipment containing small diameter rods or tubes oriented parallel to flow stream. In the case of several nuclear reactors such as the Plutonium Recycle Test Reactor and the S. S. Savannah Maritime Reactor, bundles of small diameter rods are used as the fuel elements. The situation also has application to heat exchangers. A method for accurately predicting the pressure drop characteristics of various bundle configurations would be helpful in the design and selection of equipment. Some progress has been made toward gaining a greater knowledge of the bundle characteristics under low temperature conditions. This report includes the development of relationship for the effect of temperature on pressure drop.

The first series of tests in the KER-REP-1 loop proved that a fission product contaminated loop could be decontaminated to a safe level for contact maintenance. Since a good decontamination process was available, there was much that could be improved about this process. Further testing of this process and several variations of other processes have been scheduled. The evaluation of these processes includes specific decontamination factors, process corrosion, and loop activity reduction factors (loop decontamination factors).

During normal operation the NPR will function as a closed system and the coolant will be maintained at a high degree of purity. Periodically, however, the system will have to be opened for fuel element discharge and/or decontamination. During these periods the reactor will be operated on single pass cooling. The use of deionized and deoxygenated water as the single pass coolant is not economically feasible due to the large quantities of coolant that will be required. At present it appears that filtered water will be used for this purpose. Since filtered water contains substantial amounts of dissolved solids (approximately 100 parts per million), and since it is saturated with air, this type of operation will have to be investigated with regard to corrosion problems. A particularly serious problem will be present after the system has been decontaminated, since the high temperature oxide films will have been removed and the bars metal surfaces will be exposed to the coolant.

The primary purpose of a cleanup system in a recirculating water loop is to maintain the best possible water quality conditions. This is normally accomplished by continuously purifying all or a portion of the coolant. A secondary objective of the cleanup system is to help maintain the system pH at a constant value. A system that will satisfactorily accomplish both of these objectives is at times difficult to obtain. Generally the pH control characteristics are sacrificed in favor of the more important cleanup requirements. A somewhat new approach to the problem pf cleanup system design appears to offer a solution to this problem for high pH systems.

A correlation between the optical densities if the Pb-Sn alloy system and UO2 with respect to Co^60 gamma radiation has been determined. This enables one to fabricate density standards of whatever geometry may be desired for one in the gamma absorptiometer by simply casting a Pb-Sn alloy of the proper composition to correspond to the density required.