A simple analytic method is developed, based on physical approximations, for treating transient implosive longitudinal compression of bunches of heavy ions in an accelerator system for ignition of inertial-confinement fusion pellet targets. Parametric dependences of attainable compressions and of beam path lengths and times during compression are indicated for ramped pulsed-gap lines, rf systems in storage and accumulator rings, and composite systems, including sections of free drift. It appears that for high-confidence pellets in a plant producing 1000 MW of electric power the needed pulse lengths cannot be obtained with rings alone unless an unreasonably large number of them are used, independent of choice of rf harmonic number. In contrast, pulsed-gap lines alone can meet this need. The effects of an initial inward compressive drift and of longitudinal emittance are included.

A time dependent, bounce-averaged Fokker-Planck code, with quasi-linear diffusion at fundamental and second harmonic frequencies, has been used to study cold plasma trapping and heating of hot electrons in mirror geometry. Both electron-electron and electron-ion Coulomb collisions are included. The code can model either cavity heating (electric field throughout cavity as in EBT) or beam controlled heating (electric field spatially restricted as in the TMX-Upgrade tandem mirror). The heating method has implications for the equilibrium energy and anisotropy of the hot electrons. In TMX-Upgrade, off-midplane heating at the second harmonic in the thermal barrier is planned as a means to control anisotropy (T/sub parallel//T/sub perpendicular/. By spatially limiting (limit in B) the microwave beam and with strong single-pass absorption, the mean hot electron energy may also be controlled since the heating rate decreases at high energy due to the relativistic mass shift of the resonance to higher magnetic field.

Anatomical features of the sheep lung make it an excellent model for studying pulmonary immunity. Four specific lung segments were identified which drain exclusively to three separate lymph nodes. One of these segments, the dorsal basal segment of the right lung, is drained by the caudal mediastinal lymph node (CMLN). Cannulation of the efferent lymph duct of the CMLN along with highly localized intrabronchial instillation of antigen provides a functional unit with which to study factors involved in development of pulmonary immune responses. Following intrabronchial immunization there was an increased output of lymphoblasts and specific antibody-forming cells in efferent CMLN lymph. Continuous divergence of efferent lymph eliminated the serum antibody response but did not totally eliminate the appearance of specific antibody in fluid obtained by bronchoalveolar lavage. In these studies localized immunization of the right cranial lobe served as a control. Efferent lymphoblasts produced in response to intrabronchial antigen were labeled with /sup 125/I-iododeoxyuridine and their migrational patterns and tissue distribution compared to lymphoblasts obtained from the thoracic duct. The results indicated that pulmonary immunoblasts tend to relocate in lung tissue and reappear with a higher specific activity in pulmonary lymph than in thoracic duct lymph. The reverse was observed …

Atomic data for the electron-impact ionization of ions in the Fe isonuclear sequence is reviewed. The best available data are identified. Comments are made on current research activities leading to future data for Fe ions. 23 refs., 29 figs., 12 tabs.

An Exploratory Studies Facility (ESF) is planned to support the characterization of a potential site for a high-level nuclear waste repository at Yucca Mountain, NV. The selection of a design for the ESF is a critical decision, because the ESF design may affect the accuracy of characterization testing and subsequent repository design. The assist the design process, a comparative evaluation was conducted to rank 34 alternative relied on techniques from formal decision analysis, including decision trees and multiattribute utility analysis (MUA). The results helped to identify favorable design features and convinced the Department of Energy to adopt the top-ranked option as the preferred ESF design.

We review models for spin-weighted parton distributions in a proton. Sum rules involving the nonsinglet components of the structure function xg{sub 1}{sup p} help narrow the range of parameters in these models. The contribution of the {gamma}{sub 5} anomaly term depends on the size of the integrated polarized gluon distribution and experimental predictions depend on its size. We have proposed three models for the polarized gluon distributions, whose range is considerable. These model distributions give an overall range is considerable. These model distributions give an overall range of parameters that can be tested with polarized beam experiments. These are discussed with regard to specific predictions for polarized beam experiments at energies typical of UNK.

In many situations, stand-off remote-sensing and hazard-interdiction techniques over realistic operational areas are often impractical "and difficult to characterize. An alternative approach is to implement an adap- tively deployable array of sensitive agent-specific devices. Our group has been studying the collective be- havior of an autonomous, multi-agent system applied to chedbio detection and related emerging threat applications, The current physics-based models we are using coordinate a sensor array for mukivanate sig- nal optimization and coverage as re,alized by a swarm of robots or mobile vehicles. These intelligent control systems integrate'glob"ally operating decision-making systems and locally cooperative learning neural net- works to enhance re+-timp operational responses to dynarnical environments examples of which include obstacle avoidance, res~onding to prevailing wind patterns, and overcoming other natural obscurants or in- terferences. Collectively',tkensor nefirons with simple properties, interacting according to basic community rules, can accomplish complex interconnecting functions such as generalization, error correction, pattern recognition, sensor fusion, and localization. Neural nets provide a greater degree of robusmess and fault tolerance than conventional systems in that minor variations or imperfections do not impair performance. The robotic platforms would be equipped with sensor devices that perform opticaI detection of biologicais in combination with multivariate chemical analysis tools …

Marty brittle fracture evaluation procedures include plasticity corrections to elastically computed stress intensity factors. These corrections, which are based on the existence of a plastic zone in the vicinity of the crack tip, can overestimate the plasticity effect for a crack embedded in a stress concentration region in which the elastically computed stress exceeds the yield strength of the material in a localized zone. The interactions between the crack, which acts to relieve the high stresses driving the crack, plasticity effects in the stress concentration region, and the nature and source of the loading are examined by formulating explicit flaw finite element models for a crack emanating from the root of a notch located in a panel subject to an applied tensile stress. The results of these calculations provide conditions under which a crack-tip plasticity correction based on the Irwin plastic zone size overestimates the plasticity effect. A failure assessment diagram (FAD) curve is used to characterize the effect of plasticity on the crack driving force and to define a less restrictive plasticity correction for cracks at notch roots when load-controlled boundary conditions are imposed. The explicit flaw finite element results also demonstrate that stress intensity factors associated with load-controlled …

A novel technique has been developed at Argonne National Laboratory to determine the {sup 239}Pu content in EBR-II blanket elements using resonance transmission analysis (RTA) with a filtered reactor beam. The technique uses cadmium and gadolinium filters along with a {sup 239}Pu fission chamber to isolate the 0.3 eV resonance in {sup 239}Pu. In the energy range from 0.1 to 0.5 eV, the total microscopic cross-section of {sup 239}Pu is significantly larger than the cross-sections of {sup 238}U and {sup 235}U. This large difference in cross-section allows small amounts of {sup 239}Pu to be detected in uranium samples. Tests using a direct beam from a 250 kW TRIGA reactor have been performed with stacks of depleted uranium and {sup 239}Pu foils. Preliminary measurement results are in good agreement with the predicted results up to about two weight percent of {sup 239}Pu in the sample. In addition, measured {sup 239}Pu masses were in agreement with actual sample masses with uncertainties less than 3.8 percent.

A large modulation in the series Q-meter can lead to nonlinear NMR signals and asymmetric polarization values. With a careful circuit analysis the nonlinearity can be estimated and corrections to polarization can be determined as a function of the strength of the modulation. We describe the recent LAMPF polarized proton target experiment, its NMR measurement and corrections to the measured polarizations.

It is known that surface and subsurface damage in machined silicon nitride (Si{sub 3}N{sub 4}) ceramic components can significantly affect component strength and lifetime. Because Si{sub 3}N{sub 4} may transmit some light into its subsurface, they have developed an elastic optical scattering technique to provide two-dimensional image data for detecting surface or subsurface defects and machining damage. This technique has been used to analyze diamond-ground Si{sub 3}N{sub 4} specimens subjected to various machining conditions. The results were compared with photomicroscopy data for detect characterization and were correlated with machining conditions.

Rate estimation of nuclear pulses emitted from nuclear detectors has been well documented in papers written as early as 1965 to as recently as 1990. It is well known that pulses emitted from a nuclear detector can vary with time and an accurate estimate of the count rate must be based on a sifficient number of pulse counts within a sample period as well as the recent history of pulse counts acquired in previous windows to accurately estimate the current rate. This paper will review the attributes of three popular counting methods and show the implementation of one of these methods, the floating mean algorithm on an embedded controller system. The software discussion will look at how to apply the chosen algorithm on two popular platforms: the Motorola 68HC11 and the Intel 805X series embedded controllers.

New emissions regulations will increase the need for compact, inexpensive sensors for monitoring and control of automotive exhaust gas pollutants. Species of interest include hydrocarbons, carbon monoxide, and oxides of nitrogen (NO{sub x}). The current work is directed towards the development of fast, high sensitivity electrochemical NO{sub x} sensors for automotive diesel applications. We have investigated potentiometric NO sensors with good sensitivity and fast response when operated in 10% O{sub 2}. The sensors consist of yttria-stabilized zirconia substrates attached with NiCr{sub 2}O{sub 4} sensing electrodes and Pt reference electrodes. A composite NiCr{sub 2}O{sub 4}:Rh sensing electrode is shown to give significantly faster response than NiCr{sub 2}O{sub 4} alone. The exact role of the Rh in enhancing the response speed is not clear at present. However, the Rh appears to accumulate at the contacts between the NiCr{sub 2}O{sub 4} particles and may enhance the inter-particle electronic conduction. Ongoing testing of these sensors is being performed to elucidate the sensing mechanisms and to quantify cross sensitivity to, for example, NO{sub 2}.

Over the past several years, significant progress has been made in the analysis of safety and environmental (S&E) issues for inertial fusion energy (IFE). Detailed safety assessments have been performed for the baseline power plant concepts, as well as for a conceptual target fabrication facility. Safety analysis results are helping to drive the agenda for experiments. A survey of the S&E characteristics--both radiological and chemical--of candidate target materials has been completed. Accident initiating events have been identified and incorporated into master logic diagrams, which will be essential to the detailed safety analyses that will be needed in the future. Studies of aerosol generation and transport will have important safety implications. A Monte Carlo-based uncertainty analysis procedure has been developed for use in neutron activation calculations. Finally, waste management issues are receiving increased attention and are deserving of further discussion.

The availability of the assembled mouse genome makespossible, for the first time, an alignment and comparison of two largevertebrate genomes. We have investigated different strategies ofalignment for the subsequent analysis of conservation of genomes that areeffective for different quality assemblies. These strategies were appliedto the comparison of the working draft of the human genome with the MouseGenome Sequencing Consortium assembly, as well as other intermediatemouse assemblies. Our methods are fast and the resulting alignmentsexhibit a high degree of sensitivity, covering more than 90 percent ofknown coding exons in the human genome. We have obtained such coveragewhile preserving specificity. With a view towards the end user, we havedeveloped a suite of tools and websites for automatically aligning, andsubsequently browsing and working with whole genome comparisons. Wedescribe the use of these tools to identify conserved non-coding regionsbetween the human and mouse genomes, some of which have not beenidentified by other methods.

Abstract: Electron microscope phase images, produced by direct reconstruction of the scattered electron wave from a focal series of high-resolution images, were used to determine the nature of defects formed in GaN:Mg crystals. We studied bulk crystals grown from dilute solutions of atomic nitrogen in liquid gallium at high pressure and thin films grown by the MOCVD method. All the crystals were grown with Ga-polarity. In both types of samples the majority of defects were three dimensional Mg-rich hexagonal pyramids with bases on the (0001) plane and six walls on {l_brace}11{und 2}3{r_brace} planes seen in cross-section as triangulars. Some other defects appear in cross-section as trapezoidal (rectangular) defects as a result of presence of truncated pyramids. Both type of defects have hollow centers. They are decorated by Mg on all six side walls and a base. The GaN which grows inside on the defect walls shows polarity inversion. It is shown that change of polarity starts from the defect tip and propagates to the base, and that the stacking sequence changes from ab in the matrix to bc inside the defect. Exchange of the Ga sublattice with the N sublattice within the defect leads to 0.6 {+-} 0.2{angstrom} displacement between …

Lithium-ion cells, with graphite anodes and LiNi0.8Co0.15Al0.05O2 cathodes, were cycled for up to 1000 cycles over different ranges of SOC and temperatures. The decline in cell performance increases with the span of SOC and temperature during cycling. Capacity fade was caused by a combination of the loss of cycleable Li and degradation of the cathode. The room temperature anodes showed SEI compositions and degrees of graphite disorder that correlated with the extent of the Li consumption, which was linear in cell test time. TEM of the cathodes showed evidence of crystalline defects, though no major new phases were identified, consistent with XRD. No evidence of polymeric deposits on the cathode particles (FTIR) was detected although both Raman and TEM showed evidence of P-containing deposits from electrolyte salt degradation. Raman microscopy showed differences in relative carbon contents of the cycled cathodes, which is blamed for part of the cathode degradation.

We present the longitudinal coherence measurement of the transient inversion collisional x-ray laser for the first time. The Ni-like Pd x-ray laser at 14.68 nm is generated by the LLNL COMET laser facility and is operating in the gain-saturated regime. Interference fringes are produced using a Michelson interferometer setup in which a thin multilayer-coated membrane is used as a beam splitter. The longitudinal coherence length for the picosecond duration 4d{sup 1}S{sub 0} {yields} 4p{sup 1}P{sub 1} lasing transition is determined to be {approx}400 {micro}m (1/e HW) by adjusting the length of one interferometer arm and measuring the resultant variation in fringe visibility. This is four times improved coherence than previous measurements on quasi-steady state schemes largely as a result of the narrower line profile in the lower temperature plasma. The inferred gain-narrowed linewidth of {approx}0.29 pm is also substantially narrower than previous measurements on quasi-steady state x-ray laser schemes. This study shows that the coherence of the x-ray laser beam can be improved by changing the laser pumping conditions. The x-ray laser is operating at 4 - 5 times the transform-limited pulse.

The lithium iron phosphate chemistry is plagued by the poor conductivity and slow lithium diffusion in the solid phase. In order to alleviate these problems, various research groups have adopted different strategies including decreasing the particle sizes, increasing the carbon content, and adding dopants. In this study we obtained LiFePO4 electrodes from six different sources and used a combined model-experimental approach to compare the performance. Samples ranged from one with no carbon coating to one with 15 percent coating. In addition, particle sizes varied by as much as a order of magnitude between samples. The study detailed in this manuscript allows us to provide insight into the relative importance of the conductivity of the samples compared to the particle size, the impact of dopant on performance and ideas for making materials in order to maximize the power capability of this chemistry.

We utilize ultrafast terahertz pulses to monitor the carrierdynamics in the high-TC superconductor Bi2Sr2CaCu2O8+delta. Thetemperature, density and timedependence distinctly exposes a bimolecularrecombination process of quasiparticles which underlies formation ofCooper pairs.

The cycling performance of low-cost LiFePO4-based high-power lithium-ion cells was investigated and the components were analyzed after cycling to determine capacity fade mechanisms. Pouch type LiFePO4/natural graphite cells were assembled and evaluated by constant C/2 cycling, pulse-power and impedance measurements. From post-test electrochemical analysis after cycling, active materials, LiFePO4 and natural graphite, showed no degradation structurally or electrochemically. The main reasons for the capacity fade of cell were lithium inventory loss by side reaction and possible lithium deposition on the anode.

The finite element method has been routinely used to calculate the image stresses of dislocation segments. When these segments intersect with surfaces, the image stresses at the surfaces diverges singularly. At the presence of these singularities, both convergence and accuracy of using the finite element method need to be examined critically. This article addresses these issues with the aim toward the application of dislocation dynamics simulations in thin films.

The electrochemical properties of LiFePO4 cathodes with different carbon contents were studied to find out the role of carbon as conductive additive. LiFePO4 cathodes containing from 0 percent to 12 percent of conductive additive (carbon black or mixture of carbon black and graphite) were cycled at different C rates. The capacity of LiFePO4 cathode increased, as conductive additive content increased. Carbon increased the utilization of active material and the electrical conductivity of electrode, but decreased volumetric capacity of electrode.

A method is proposed for conditioning electron beams via Thomson scattering. The conditioning provides a quadratic correlation between the electron energy deviation and the betatron amplitude of the electrons, which results in enhanced gain in free-electron lasers. Quantum effects imply conditioning must occur at high laser fluence and moderate electron energy. Conditioning of x-ray free-electron lasers should be achievable with present laser technology, leading to significant size and cost reductions of these large-scale facilities.