The Argonne Wakefield Accelerator group develops accelerating structures based on dielectric loaded waveguides. We use high charge short electron bunches to excite wakefields in dielectric loaded structures, and a second (low charge) beam to probe the wakefields left behind by the drive beam. We report measurements of beam parameters and also initial results of the dielectric loaded accelerating structures. We have studied acceleration of the probe beam in these structures and we have also made measurements on the RF pulses that are generated by the drive beam. Single drive bunches, as well as multiple bunches separated by an integer number of RF periods have been used to generate the accelerating wakefields.

The motivation for parity experiments in simple atomic systems is that the atomic physics is known precisely so they directly test the weak interactions. We review the status of the parity experiments that have been done in atomic hydrogen and suggest some possibilities for experiments in helium like ions.

Recently we created La/Fe multilayers with a helical magnetic structure imprinted from the conditions of growth rather than by the magnetic interactions between layers. Each sublayer was 30{angstrom} thick, and during deposition the sample was rotated in an external field of 3 Oe. a field strong enough to magnetize the Fe layer being deposited but not sufficient to perturb the magnetization of the Fe layers already grown. As a result adjacent Fe layers formed a helical structure with a chirality and periodicity determined by the rotational direction and speed of the substrate and the rate of deposition. Following this discovery, an extensive set of experiments (mainly using Kerr effect magnetometry and polarized neutron reflectivity) was undertaken to ascertain the stability of imprinted magnetic structures, and to understand the onset of magnetization during growth. La/Fe imprinted helical magnetic structures (of different La and Fe thicknesses) were found to be stable in time and to be permanently erased only by magnetic fields larger than 90 Oe.

The magnetic properties of La/Fe multilayers were tested by magneto-optical Kerr effect and polarized neutron reflectometry. The experiments indicated that above a layer thickness t{sub la} = 25{angstrom} the magnetic state of the virgin sample is represented by a spiral-like arrangement of magnetizations of subsequent Fe layers, whereas each Fe layer itself is ferromagnetic. Polarized neutron reflectometry shows that the helix has predominantly one chirality over the entire surface area of several cm{sup 2}. Tine magnetic spiral structure is imprinted during the growth process by rotating the sample in a small residual magnetic field. External magnetic field of 90 Oe are sufficient to erase the magnetic structure irreversibly.

In the open field line region of the scrape-off layer (SOL), plasma potential is to a considerable degree determined by the boundary conditions on the divertor plates. By introducing toroidal asymmetries of the surface relief of the divertor plates or of their chemical composition, one can create toroidally asymmetric potential variations over the whole SOL and thereby induce convective plasma motion. This motion should lead to a broadening of the SOL and to reduction of beat load on the divertor plates. Convective motion can be induced also by a toroidally asymmetric gas-puff. In the present paper the authors consider all these techniques and evaluate the possible increase in the cross-field transport.

Traditional encryption, which protects messages from prying eyes, has been used for many decades. The present concepts of encryption are built from that heritage. Utilization of modern software-based encryption techniques implies much more than simply converting files to an unreadable form. Ubiquitous use of computers and advances in encryption technology coupled with the use of wide-area networking completely changed the reasons for utilizing encryption technology. The technology demands a new and extensive infrastructure to support these functions. Full understanding of these functions, their utility and value, and the need for an infrastructure, takes extensive exposure to the new paradigm. This paper addresses issues surrounding the establishment and operation of a key management system (i.e., certification authority) that is essential to the successful implementation and wide-spread use of encryption.

At the Argonne Chemistry Division efforts are underway to develop a sub-picosecond electron beam pulse radiolysis facility for chemical studies. The target output of the accelerator is to generate electron pulses that can be adjusted from 3nC in .6ps to 100nC in 45ps. In conjunction with development of the accelerator a state-of-the-art ultrafast laser system is under construction that will drive the linac's photocathode and provide probe pulses that are tunable from the UV to IR spectral regions.

The initial observations of superconductivity at temperatures above 77 K in copper-oxide based materials was surprising from a variety of different perspectives. Among the unexpected findings were reports of superconductivity for the series RBa{sub 2}Cu{sub 3}O{sub 7} where R is a rare earth (Y, Nd-Tm), which may carry a large, local magnetic moment. Superconductivity was subsequently demonstrated for all 4f analogs in this series except Ce, Pr, and Tb. In addition to the RBa{sub 2}Cu{sub 3}O{sub 7} series, there are several other CuO based series of superconductors that are formed by substituting R ions. The most studied of these are listed in Table 1, together with the f ions that form isostructural compounds and their superconducting critical temperatures (T{sub c}). The presence of an R ion with a large magnetic moment does not significantly influence the superconductivity. In contrast, even the presence of small concentrations of magnetic impurity ions in a conventional superconductor inhibits superconductivity by interfering with the formation of Cooper pairs. Most R ions substitute into an isostructural series with no observable effect on the superconducting properties of the material. As can be seen from Table 1, there are notable exceptions to this observation. In particular, the rare-earth …

We plan to resonantly excite plasma wakefields using a train of electron bunches separated by an-integer number of plasma wavelengths. The multiple electron bunches are generated by a photocathode based RF gun by splitting the laser beam into temporally separated pulses. The amplitude of the wakefields generated by the sequence of bunches is expected to be higher than that generated if all charge had been in only one bunch, because this single bunch would be considerably longer than the individual sub-bunches due to space charge effects in our gun.

In thinking about this issue, one comes to fundamental question: Why are we concerned at all? Why have all of us gathered here, rather than simply continue to clean up what we should from the past and control our emissions for the present and the future? The answer, I think, may be hinted at by several scenarios (which, although plausible given current trends, are intended to be hypothetical).

Quantum-based atomistic simulations are being used to study fundamental deformation and defect properties relevant to the multiscale modeling of plasticity in bcc metals at both ambient and extreme conditions. Ab initio electronic-structure calculations on the elastic and ideal-strength properties of Ta and Mo help constrain and validate many-body interatomic potentials used to study grain boundaries and dislocations. The predicted C(capital Sigma)5 (310)[100] grain boundary structure for Mo has recently been confirmed in HREM measurements. The core structure, (small gamma) surfaces, Peierls stress, and kink-pair formation energies associated with the motion of a/2(111) screw dislocations in Ta and Mo have also been calculated. Dislocation mobility and dislocation junction formation and breaking are currently under investigation.

This report briefly describes the efforts by the organizing committee in preparation for the conference entitled Controlling Our Destinies: Historical, Philosophical, Social, and Ethical Perspectives on the Human Genome Project. The conference was held October 5-8, 1995.

Existing Housing - Much of the older multifamily housing stock in the United States includes units in structures with uninsulated masonry walls. Included in this stock are two- and three-story walk-up apartments, larger apartment complexes, and public housing (both high- rise and townhouse). This older multifamily housing has seen years of heavy use that may have left the plaster wall marred or damaged. Long- term building settlement or movement may have cracked the plaster, sometimes severely. Moisture from invented kitchens and baths may have caused condensation on uninsulated exterior walls. At best this condensation has left stains on the paint or wallpaper. At worst it has supported mold and mildew growth, fouling the air and creating unhealthy living conditions. Deteriorating plaster and flaking paint also result from wet walls. The presence of flaking, lead-based paint in older (pre-1978) housing is a major public health concern. Children can suffer permanent mental handicaps and psychological disorders if they are subjected to elevated levels of lead, while adults can suffer hypertension and other maladies. Studies have found that, in some urban communities with older housing stocks, over 35% of children tested have elevated blood lead levels (Hastings, et al.: 1997). Nationally, nearly 22% …

The critical energy inkstructures include gas, OL and electric power. These Mrastructures are complex and interdependent nmvorks that are vital to the national secwiy and social well being of our nation. Many electric power systems depend upon gas and oil, while fossil energy delive~ systems depend upon elecnic power. The control mechanisms for these Mrastructures are often referred to as SCADA (Supmivry CkmdandDaU Ac@itz&z) systems. SCADA systems provide remote monitoring and centralized control for a distributed tmnsportation infmsmucture in order to facilitate delivery of a commodi~. AIthough many of the SCADA concepts developed in this paper can be applied to automotive mmsponation systems, we will use transportation to refer to the movement of electrici~, gas, and oil. \ Recently, there have been seveml reports suggesting that the widespread and increasing use of SCADA for control of energy systems provides an increasing opportuni~ for an advers~ to cause serious darnage to the energy inbstmcturei~. This damage could arise through cyber infiltration of the SCADA networks, by physically tampering with the control networks, or through a combination of both means. SCADA system threats decompose into cyber and physical threats. One solution to the SCADA security problem is to design a standard for …

A readout system for a high-rate muon Cathode Strip Chamber (CSC) is described. The system, planned for use in the forward region of the ATLAS muon spectrometer, uses two custom CMOS integrated circuits to achieve good position resolution at a flux of up to 2,500 tracks/cm{sup 2}/s.

Prior laboratory corrosion studies along with experience at the black liquor gasifier in New Bern, North Carolina, clearly demonstrate that serious material problems exist with the gasifier's refractory lining. Mullite-based and alumina-based refractories used at the New Bern facility suffered significant degradation even though they reportedly performed adequately in smaller scale systems. Oak Ridge National Laboratory's involvement in the failure analysis, and the initial exploration of suitable replacement materials, led to the realization that a simple and reliable, complementary method for refractory screening was needed. The development of a laboratory test system and its suitability for simulating the environment of black liquor gasifiers was undertaken. Identification and characterization of corrosion products were used to evaluate the test system as a rapid screening tool for refractory performance and as a predictor of refractory lifetime. Results from the test systems and pl ants were qualitatively similar.

None

None

None

None

None

The United States Department of Energy (DOE) carries out a significant amount of transportation each year, including waste remediation activities at the sites for which it is responsible. In future years, the amount of material transported is expected to increase, and the costs of this transportation are expected to be large. To support the assessment of such costs, a cost-estimating model was developed in 1996, peer-reviewed against other available packaging and transportation cost data, and used to calculate the costs for a significant number of shipping campaigns of radioactive waste. This cost-estimating model, known as the Ten-year Plan Transportation Model (TEPTRAM), served as the cost-estimating model for radioactive material shipments in developing the DOE Office of Environmental Management's Ten Year Plan. The TEPTRAM model considered costs for recovery and processing of the wastes, packaging of the wastes for transport, carriage of the waste and a rough estimate of labor cost s associated with preparing and undertaking the shipments. At the user's direction, the model could also include the cost for DOE's interaction with its external stakeholders (e.g., state and local governments and tribal entities) and the cost associated with tracking and communication (e.g., use of the DOE TRANSCOM system). By …

None

None