The primary purpose of this project was to employ two geophysical imaging techniques, electrical resistivity tomography and cross-borehole ground penetrating radar, to image a controlled infiltration of a saline tracer under unsaturated flow conditions. The geophysical techniques have been correlated to other more traditional hydrologic measurements including neutron moisture measurements and induction conductivity logs. Images that resulted during two successive infiltrations indicate the development of what appear to be preferential pathways through the finer grained materials, although the results could also be produced by cationic capture of free ions in clays. In addition the site as well as the developing solute plume exhibits electrical anisotropy which is likely related to flow properties. However the geologic significance of this phenomenon is still under investigation.

None

The ability to accurately quantify the intrinsic resolution of chemically amplified photoresists is critical for the optimization of resists for extreme ultraviolet (EUV) Iithography. We have recently reported on two resolution metrics that have been shown to extract resolution numbers consistent with direct observation. In this paper we examine the previously reported contact-hole resolution metric and explore the sensitivity of the metric to potential error sources associated with the experimental side of the resolution extraction process. For EUV exposures at the SEMATECH Berkeley microfield exposure tool, we report a full-process error-bar in extracted resolution of 1.75 nm RMS and verify this result experimentally.

RecFOR proteins are important for DNA repair by homologous recombination in bacteria. The RecO protein from Thermus thermophilus was cloned, purified and characterized for its binding to oligonucleotides. The protein was crystallized alone and in complex with a 14-mer oligonucleotide. Both crystal forms grow under different crystallization conditions in the same space group, P3121 or P3221, with almost identical unit cell parameters. Complete data sets were collected to 2.8 Angstrom and 2.5 Angstrom for RecO alone and the RecO-oligonucleotide complex, respectively. Visual comparison of the diffraction patterns between the two crystal forms and calculation of an Rmerge of 33.9 percent on F indicate that one of the crystal forms is indeed a complex of RecO with bound oligonucleotide.

This cleanup verification package documents completion of remedial action for the 100-F-20, Pacific Northwest Laboratory Parallel Pits waste site. This waste site consisted of two earthen trenches thought to have received both radioactive and nonradioactive material related to the 100-F Experimental Animal Farm.

None

The Pacific Northwest National Laboratory (Pacific Northwest) operates a number of Research and Development facilities for the U.S. Department of Energy (DOE) on the Hanford Site. According to DOE Order 5400.1, a written environmental monitoring plan is required for each site, facility, or process that uses, generates, releases, or manages significant pollutants or hazardous materials. Facility Effluent Monitoring Plans (FEMPs) have been developed on the Hanford Site to document the facility effluent monitoring portion of the Environmental Monitoring Plan (DOE 2000) for the Hanford Site. Three of Pacific Northwest's R and D facilities, the 325, 331, and 3720 Buildings, are considered major emission points for radionuclide air sampling; thus, individual FEMPs have been developed for these facilities. Because no definition of ''significant'' is provided in DOE Order 5400.1 or the accompanying regulatory guide DOE/EH?0173T, this FEMP was developed to describe monitoring requirements in the DO E-owned, Pacific Northwest-operated facilities that do not have individual FEMPs. These facilities are referred to as Balance-of-Plant (BOP) facilities.

During this last quarter of the ''Seismic Evaluation of Hydrocarbon Saturation in Deep-Water Reservoirs'' project (Grant/Cooperative Agreement DE-FC26-02NT15342), we have moved forward on several fronts, including data acquisition as well as analysis and application. During this quarter we have: (1) Completed our site selection (finally); (2) Measured fluid effects in Troika deep water sand sample; (3) Applied the result to Ursa ''fizz gas'' zone; (4) Compared thin layer property averaging on AVO response; (5) Developed target oriented NMO stretch correction; (6) Examined thin bed effects on A-B crossplots; and (7) Begun incorporating outcrop descriptive models in seismic forward models. Several factors can contribute to limit our ability to extract accurate hydrocarbon saturations in deep water environments. Rock and fluid properties are one factor, since, for example, hydrocarbon properties will be considerably different with great depths (high pressure) when compared to shallow properties. Significant over pressure, on the other hand will make the rocks behave as if they were shallower. In addition to the physical properties, the scale and tuning will alter our hydrocarbon indicators. Reservoirs composed of thin bed effects will broaden the reflection amplitude distribution with incident angle. Normal move out (NMO) stretch corrections based on frequency shifts can …

Spin-orbit coupled systems generally break the spin rotation symmetry. However, for a model with equal Rashba and Dresselhauss coupling constant (the ReD model), and for the [110] Dresselhauss model, a new type of SU(2) spin rotation symmetry is discovered. This symmetry is robust against spin-independent disorder and interactions, and is generated by operators whose wavevector depends on the coupling strength. It renders the spin lifetime infinite at this wavevector, giving rise to a Persistent Spin Helix (PSH). We obtain the spin fluctuation dynamics at, and away, from the symmetry point, and suggest experiments to observe the PSH.

In this thesis work we have measured the following upper limits at 90% of confidence level, for B meson decays (in units of 10{sup -6}), using a statistics of 465.0 x 10{sup 6} B{bar B} pairs: {Beta}(B{sup 0} {yields} {eta}K{sup 0}) < 1.6 {Beta}(B{sup 0} {yields} {eta}{eta}) < 1.4 {Beta}(B{sup 0} {yields} {eta}{prime}{eta}{prime}) < 2.1 {Beta}(B{sup 0} {yields} {eta}{phi}) < 0.52 {Beta}(B{sup 0} {yields} {eta}{omega}) < 1.6 {Beta}(B{sup 0} {yields} {eta}{prime}{phi}) < 1.2 {Beta}(B{sup 0} {yields} {eta}{prime}{omega}) < 1.7 We have no observation of any decay mode, statistical significance for our measurements is in the range 1.3-3.5 standard deviation. We have a 3.5{sigma} evidence for B {yields} {eta}{omega} and a 3.1 {sigma} evidence for B {yields} {eta}{prime}{omega}. The absence of observation of the B{sup 0} {yields} {eta}K{sup 0} open an issue related to the large difference compared to the charged mode B{sup +} {yields} {eta}K{sup +} branching fraction, which is measured to be 3.7 {+-} 0.4 {+-} 0.1 [118]. Our results represent substantial improvements of the previous ones [109, 110, 111] and are consistent with theoretical predictions. All these results were presented at Flavor Physics and CP Violation (FPCP) 2008 Conference, that took place in Taipei, Taiwan. They will be …

Modeling, in conjunction with testing, is a rich source of insight. Model parameters are easily controlled and monitoring can be done unobtrusively. The ability to inject faults without otherwise affecting performance is particularly critical. Many iterations can be done quickly with a model while varying parameters and conditions based on a small number of validation tests. The objective of Model-Based Reliability Analysis (MBRA) is to identify ways to capitalize on the insights gained from modeling to make both qualitative and quantitative statements about product reliability. MBRA will be developed and exercised in the realm of weapon system development and maintenance, where the challenges of severe environmental requirements, limited production quantities, and use of one-shot devices can make testing prohibitively expensive. However, the general principles will also be applicable to other product types.

This report focuses on current U.N. reform efforts and priorities from the perspective of several key actors, including the U.S. government, the U.N. Secretary General, selected groups of member states, non-governmental organizations (NGOs), and a cross-section of groups tasked with addressing U.N. reform. It also examines congressional actions related to U.N. reform, as well as future policy considerations.

A review was conducted of past laboratory-scale test methods and to assess their validity for ranking materials and lubricants for use as piston and liner materials in compression-ignition (CI) and spark-ignition (SI) engines. Most of the previous work was aimed at simulating SI engine environments. This report begins with a discussion of the numerous factors that can affect the validity of an approach to simulating engine conditions in a laboratory. These include not only mechanical, chemical and thermal factors, but also human factors as regards how the vehicle is operated and maintained. The next section provides an annotated review of open literature publications that address the issues of laboratory simulation of engine components. A comparison of these studies indicates a lack of sufficient standardization in procedures to enable a systematic comparison of one publication to another. There were just a few studies that compared several laboratory test methods to engine test results, and these indicated that some test methods correlate, at least qualitatively, better than others. The last section provides a series of recommendations for improving the accuracy and validity of laboratory-scale simulations of engine behavior. It became clear that much of the engine wear damage occurs during start-up when …

Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to one of the 13 regular appropriations bills that Congress passes each year.

Recent work on the VIM Monte Carlo code has aimed at advanced data libraries, ease of use, availability to users outside of Argonne, and fission source convergence algorithms in eigenvalue calculations. VIM is one of three US Monte Carlo codes in the USDOE Nuclear Criticality Safety Program, and is available through RSICC and the NEA Data Bank.

This report summarizes the federal role in historic preservation. It provides descriptions of and funding information for some of the major preservation programs, including the Historic Preservation Fund (HPF), the Advisory Council on Historic Preservation, the National Trust for Historic Preservation, and the National Register for Historic Places. Some Members of Congress have given historic preservation programs close scrutiny and have recommended that historic preservation activities be supported increasingly by the private sector.

This report summarizes current housing issues, cites legislative proposals, and in some cases, presents brief pro/con discussions.

This report outlines U.S. military operations in Bosnia and discusses issues such as U.S. and Allied Participation in Bosnia Peacekeeping (IFOR/SFOR), duration, cost, arms control and military assistance. This report also includes most recent development, background analysis, and legislation.

None

None

Aquaculture — the farming of fish, shellfish, and other aquatic animals and plants in a controlled environment — is expanding rapidly abroad, with more modest advances in the United States. This report discusses the federal laws and regulations that guide the management of resources in open ocean and near-shore coastal areas.

The Department of Energy's Hanford Site in southeastern Washington State was established in the 1940s as part of the Manhattan Project. Hanford's role was to produce weapons-grade nuclear material for defense, and by 1989, when the Site's mission changed from operations to cleanup, Hanford had produced more than 60 percent of the nation's plutonium. The legacy of Hanford's production years is enormous in terms of nuclear and hazardous waste, especially the 270 billion gallons of contaminated groundwater and the 5 million cubic yards of contaminated soil. Managing the contaminated soil and groundwater are particularly important because the Columbia River, the lifeblood of the northwest and the nation's eighth largest river, bounds the Site. Fluor Hanford's Soil & Groundwater Remediation Project (S&GRP) integrates all of the activities that deal with remediating and monitoring the groundwater across the Site. The S&GRP uses a detailed series of steps to record, track, and verify information. The Sample and Data Management (SDM) Process consists of 10 integrated steps that start with the data quality objectives process that establishes the mechanism for collecting the right information with the right people. The process ends with data quality assessment, which is used to ensure that all quantitative data …

This project was initially targeted to the making of coke for blast furnaces by using proprietary technology of Calderon in a phased approach, and Phase I was completed. The project was then re-directed to the making of iron units. U.S. Steel teamed up with Calderon for a joint effort which will last 30 months to produce directly reduced iron with the potential of converting it into molten iron (hot metal) consistent with the Roadmap recommendations of 1998 prepared by the Steel Industry in cooperation with the Department of Energy. The work which is labeled as Phase II will take place at two levels; namely, the bench scale level and the process development unit (PDU) level.

This chapter will cover the search for dark matter axions based on microwave cavity experiments proposed by Pierre Sikivie. We will start with a brief overview of halo dark matter and the axion as a candidate. The principle of resonant conversion of axions in an external magnetic field will be described as well as practical considerations in optimizing the experiment as a signal-to-noise problem. A major focus of this chapter will be the two complementary strategies for ultra-low noise detection of the microwave photons--the 'photon-as-wave' approach (i.e. conventional heterojunction amplifiers and soon to be quantum-limited SQUID devices), and 'photon-as-particle' (i.e. Rydberg-atom single-quantum detection). Experimental results will be presented; these experiments have already reached well into the range of sensitivity to exclude plausible axion models, for limited ranges of mass. The section will conclude with a discussion of future plans and challenges for the microwave cavity experiment.