There were seven charges of metal inspected during the month for corrosion and blistering studies. There were no unusual cases of blistering noted and the corrosion rates were normal for this time of year. Borescopic examination of the graphite packing around the ``B`` Hole in the F Pile revealed that the graphite is no more severely cracked than in the D Pile when it was inspected about a year ago. Examination of the graphite at the downstream and of Tube 1385-D did not indicate that any damage had been done by the leak in that tube. Forty one tubes have been charged in the F Pile on Production Test 105-90-P, ``Exposure of TX Metal Slugs.`` The routine job of taking vertical bowing measurements was turned over to the Instrument Department after working with them once in each Area. Installation of Van Stone test units was completed and a brief run was started. Van Stone flanges at both ends of 64 process tubes in both the B and F Piles were measured with a micrometer to determine the minimum amount of metal remaining.

The pile physics group reports on reactivity power coefficients from the production test No. 105-248-P, the water leak in B pile, graphite properties, xenon equations from the B pile shutdown of March 1946, and reactivity balance. The experimental physics group headed by J.M. West reports on graphite testing, the P-11 project, and shielding. The experimental physics group headed by E.B. Montgomery reports on diffusion length measurements in the DR and H piles. (GHH)

This report discusses the pressure drop on the 100-F unit, as measured on the eight pressure drop tubes, which had increased to 24 lbs./in.{sup 2} above base by May 2. The unit was shut down on May 3 to purge with 50 ppm solids for 1.1 hr. and to take care of necessary maintenance work.

This letter itemizes the miscellaneous equipment and supplies not previously specified which should be ordered to equip the 234-5 Chemical Development Laboratory. Equipment currently carried in store stock is not included in this list. The vendor is given only to identify the item or as a suggested source of supply.

None

Extrusion was run on one day, February 2, and a total of 271 billets (178 Type G, 12 type BT, and 81 red band) were processed. Two failures occurred among the red band billets; UM 6610 had begun to melt in the furnace and TX 3323 disintegrated on being extruded through the die. Samples of these billets are being checked chemically and metallurgically in an attempt to ascertain the cause for the hot-short characteristics of these billets. A sample cut from a rod which possessed zero strength (fell apart under no stress other than its own weight) at extrusion temperature was found to contain a large amount of microconstituent not ordinarily found in appreciable quantity on uranium sections. The distribution and appearance of the excess phase suggested at least partial liquation at the working temperature and it could, therefore, be responsible for the hot-short tendency.

Describes aircraft engine systems, fuels, and lubricants.

Discusses woodworking in aircraft manufacturing in general, and in detail the characteristics of wood, the glue and hardware necessary, hand tools and machines, as well as repair of the aircraft.

From Introduction: "The effects of variations in altitude, flight Mach number, and exhaust-nozzle-outlet area on the compressor performance characteristics are graphically presented. A complete tabulation of the compressor performance data is also presented."

From Summary: "An investigation was conducted in the NACA Cleveland altitude wind tunnel to determine the operational characteristics of the Westinghouse 19B-2, 19B-8, and 19XB-l jet-propulsion engines. The 19B engine is one of the earliest experimental Westinghouse axial flow engines. The 19XB-1 engine is an experimental prototype of the Westinghouse 15 series, having a rated thrust of 1400 pounds. Improvements in performance and operational characteristics have resulted in the 19XB-2B engine with a rated thrust of 1600 pounds. The operational characteristics were determined over a range of simulated altitudes from 5000 to 30,000 feet for the 19B engines and from 5000 to 35000 feet for the 19XB-l engine at airspeed from 20 to 380 miles per hour."

The following report describes an experiment on the aluminum nitrate process for the conversion of tuballoy tetrafluoride to tuballoy peroxide and the solutions resulting.

The following report covers the results of a general program that was conducted at the Oak Ridge National Laboratory to investigate the effects on plastic materials of exposure to radiation in the pile. In the investigation, several plastics were irradiated, and on removal from the pile, their rates of decay were determined by measurement of gamma activity in an ionization chamber.

This is a summarizing and reviewing report in which almost all the experimental data representing Project work done prior to 1949 on the corrosion of pure uranium are brought together and analyzed. New data obtained in this laboratory on corrosion rates in laboratory atmosphere and on the identification of corrosion products by electron diffraction are included. The data for corrosion in each of several different media have been plotted according to logarithm-of-the-rate versus reciprocal-temperature coordinates; and from these plots values for the energies and entropies of activation of the corrosion reactions have been obtained. By theoretical treatment of the role of oxygen as a negative catalyst, it is shown that this element may be expected to "poison" the corrosion rection and then act as a corrosion inhibitor. A practical significance of these data analyses is that they explain why machined uranium parts stored in inert atmospheres (helium or argon) containing only very small amounts of water vapor will corrode relatively rapidly with the formation of loose powdery oxide, whereas similar parts may be kept in dry air almost indefinitely with formation on their surface of only a discoloring, but adhered, oxide coating.

Annual report submitted by the Boy Scouts of America to Congress describing highlights from 1947, activities, honors, finance. public relations, organizational leadership, and other information about scouting programs.

Annual report submitted by the Boy Scouts of America to Congress describing highlights from 1949, activities, organizational leadership, and other information about scouting programs.

From Introduction: "The present paper is restricted to a discussion of wing theory subject to the assumptions of linearized compressible flow. It therefore employs solutions of Laplace's equation and the wave equation for cases where the boundary condition are specified in the plane of the wing."

This report addresses the Application of Molybdenum Surfaces to Heavy Metal.

From Introduction: "Recent developments in the statistical theory of extreme values (references 4 to 10) have indicated a somewhat more rational approach to the problem of predicting the probability of occurrence The present report summarizes some of these findings, indicates the method of application, and evaluates their applicability to certain gust-load problems ."

A general guide for U.S. armed forces instituting military government in occupied areas.

From summary: "Report discussing the beta-gamma dosage rate at the surface of a natural uranium disc. Measurements were taken using a Ryerson electrometer and an extrapolation ionization chamber."

Report of experimentation on mice of exposure to daily doses of gamma radiation at two rates and the resultant damage.

In August 1946 it was discovered that two effluent lines near the Columbia River at Hanford were damaged. The upstream effluent line has broken off 37 fact from the shoreline and the downstream effluent line had been bent and partly broken seventeen feet from shoreline and has swung downstream to a point about 50 feet from shorelines. This study was made to determine how fast and in what fashion the temperature of the effluent water is dissipated in the Columbia River under the present conditions and to compare this to a previous survey made when the effluent lines were believed to be in their original position.

Report presenting an investigation to determine which of two ceramic coatings, L-7C and A-417, developed by the National Bureau of Standards is more suitable as a protective coating for turbine blades in a turbojet engine. Four cast Vitallium turbine blades, two coated with each of the ceramics, were installed in a turbine wheel of a turbojet engine and subjected to accelerated cyclic life tests.

Abstract: The Control Chart statistical methods, developed by Showhart for the control of quality of manufactured products, are applied to the control of Geiger-Miller counting instruments. Experiments are reported to show the use to the Control Chart method for detecting disturbances in instrumental behavior and for detecting radioactive effects so weak that they are near the limit of detection of the instruments. As a corollary, the control chart can be used to reduce to its practical limit the time required for tests.