Abstract. Some rather idealized considerations are given regarding the depth a warped rod presses into the ribs at the places of contact. It appears that this distance may, under some conditions, be of the order of 70 times greater than for a straight rod resting uniformly on the ribs.

Report of experimentation on mice of exposure to daily doses of gamma radiation at two rates and the resultant damage.

This report follows a study that deals with a portion of the ternary diagram previously analyzed, namely the boundary curves which separate the central area of two coexistent liquid phases from the two border stripe representing one-phase liquid systems.

The following document presents designs and blueprints to the bubble-cap column built to replace a nitric acid concentrator.

This letter itemizes the miscellaneous equipment and supplies not previously specified which should be ordered to equip the 234-5 Chemical Development Laboratory. Equipment currently carried in store stock is not included in this list. The vendor is given only to identify the item or as a suggested source of supply.

The effects of power on the stability and the control characteristics of an airplane are discussed and methods of analysis are given for evaluating certain dynamic characteristics of the airplane that are not directly discernible from wind tunnel tests alone. Data are presented to show how the characteristics of a model tested in a wind tunnel are affected by power. The response of an airplane to a rolling and a yawing disturbance is discussed, particularly in regard to changes in wing dihedral and fin area. Solutions of the lateral equations of motion are given in a form suitable for direct computations. An approximate formula is developed that permits the rapid estimation of the accelerations produced during pull-up maneuvers involving abrupt elevator deflections.

Report presenting measurements downwash angles behind a model of a high-aspect-ratio wing at points near the probable tail location at Mach numbers up to 0.89 in the high-speed tunnel. The model has an NACA 65-210 section, an aspect ratio of 9.0, a taper ratio of 2.5:1, no twist, dihedral, or sweepback. Results regarding experimental data and comparison of experimental and calculated results are provided.

Report presenting testing of a semispan model of a wing of triangular plan form and aspect ratio 2 in the 12-foot pressure tunnel to determine the aerodynamic characteristics of the wing as influenced by the independent effects of Reynolds number and Mach number up to Mach numbers approaching unity. Results regarding the effect of body and effect of wing-profile modification are also provided.

Memorandum presenting the results of a wind-tunnel investigation of the low-speed characteristics of horizontal tails of aspect ratio 3 with unswept and swept-back plan forms. Two models were tested which had identical areas, aspect ratio, taper ratio, and airfoil section, differing only in the angle of sweepback and elevator area ratios. The major effect of sweepback was to increase the rate of change of hinge-moment coefficient with angle of attack, to reduce the rate of change with elevator deflection, and to reduce the elevator effectiveness.

Report presenting an investigation of the hydrodynamic take-off and landing characteristics of a model of a hypothetical jet- and rocket-propelled high-speed airplane fitted with various designs of a single monoplane hydrofoil mounted near the center of gravity. This testing is performed to determine the feasibility of the water-based operation of high-speed airplanes. Results regarding the general hydrodynamic characteristics, development of hydrofoils, and effects of some hydrofoil parameters are provided.

Report presenting an investigation in free flight of the rolling effectiveness of plain ailerons in conjunction with wings having 0 and 45 degrees sweepback with several airfoil sections. Results regarding the rolling characteristics of rectangular and sweptback-wing configurations and drag measurements are provided.

Report presenting an investigation of turbine operating temperatures as affected by liquid cooling, especially if materials of high conductivity are used, at gas temperatures up to 1925 degrees Fahrenheit. Results regarding the statio heat-transfer rig and turbine rig are provided. The investigation showed that nonstrategic material such as aluminum alloy can be used in liquid-cooled turbine wheels at high gas temperatures.

From Introduction: "The effects of variations in altitude, flight Mach number, and exhaust-nozzle-outlet area on the compressor performance characteristics are graphically presented. A complete tabulation of the compressor performance data is also presented."

Report presenting tests to determine the effect of sweepback angle and aspect ratio on the drag at supersonic speeds of wings of NACA 65-009 airfoil section. The current report is part of a bigger investigation and includes results for aspect ratios of 3.8 and 5.0. Results regarding the drag coefficient and general effect of aspect ratio are provided.

"Gust-velocity measurements and air-borne-radar observations obtained during a transcontinental flight in July 1947 have been analyzed as part of a general investigation of the uses of air-borne radar. The analysis indicates that some reduction in turbulence and a consequent reduction in the risk of encountering the larger gust velocities may be obtained by avoiding portions of clouds giving a radar echo" (p. 1).

Report presenting an investigation to determine which of two ceramic coatings, L-7C and A-417, developed by the National Bureau of Standards is more suitable as a protective coating for turbine blades in a turbojet engine. Four cast Vitallium turbine blades, two coated with each of the ceramics, were installed in a turbine wheel of a turbojet engine and subjected to accelerated cyclic life tests.

Report presenting an investigation with a ram-jet combustion chamber to determine the effect of fuel-air ratio and the inlet-air parameters of pressure, temperature, and velocity on combustion limit, combustion efficiency, and flame length.

Results of a wind-tunnel investigation at a Reynolds number of 6.8 x 10(exp 6) to determine the static longitudinal stability characteristics of a 42 degree sweptback wing and fuselage combination with a sweptback horizontal tail are provided. Included are the effects of vertical position of fuselage and tail with respect to wing for several combinations of high-lift and staff-control devices. Also included is the effect of a simulated ground.

Memorandum presenting measurements of gust and draft velocities within cumulus clouds at a certain army air field using an AT-6 airplane. The measurements were made to supplement the at a obtained with P-61C airplanes. The data are summarized in tables.

Report presenting testing of a twin-scoop duct inlet that enclosed 37.2 percent of the forebody circumference at Mach numbers between 1.36 and 2.01. The approach to each scoop consisted of a ramp that deflected the flow to create an oblique shock wave in front of the duct entrance. Results regarding the inlet proportions, ramp angle, slots, and angle of incidence are provided.

Memorandum presenting measurements of some of the high-speed characteristics of the D-558-1 airplane up to Mach number 0.89. The results of the tests showed that the stabilizer incidence drastically affected the longitudinal trim characteristics above a Mach number of 0.80.

Report presenting a discussion of a number of the problems that most frequently arise with airfoils on helicopters. A reference list of published reports on airfoil section characteristics which are useful in regards to these helicopter problems is also included.

Report presenting an experimental investigation to determine the vibration phenomena that occur in turbine blades of a typical jet-propulsion engine during service operation; high-temperature strain gages were used to measure the turbine-blade vibrations. Results regarding modes of vibration, centrifugal stresses, and vibration of turbine blades during operation are provided.

Report presenting free-flight investigations conducted on four 16-inch-diameter ramjet units to determine the performance at high subsonic and supersonic velocities. Data for evaluating the performance were obtained from radio-telemetering and radar-tracking equipment. Results regarding combustion performance, diffuser total-pressure recovery, thrust coefficient, and external drag coefficient are provided.