At present, emphasis is being given the application of nondestructive testing to the inspection of nuclear fuel in conjunction with complete product specifications. The objective is to quantitatively specify fuel quality parameters, and to measure the entire fuel production against these specifications nondestructively. Under this concept the acceptability of a given fuel element becomes a well-defined factor readily determined by appropriate nondestructive tests.

"A ring circuit is a succession or two-port networks and at least one three-port network, each feeding the next at one port and the last feeding the first so that the sequence closes on itself leaving at least one input port. The input admittance is derived in terms ef various matrices describing the circuit for one- and two-input port rings."

Technical report includes three reports of research progress: 1) Range Measurements on 190 Mev Deuterons, M. Stephan; 2) Meson measurements, C. Lattes; and 3) N-P Scattering, R. Christian.

A prototype sampler for obtaining samples of high radioactive UO2SO4 solution for use in the HRT is presented. It was successfully operated in conjunction with a low pressure water system and a high pressure, high temperature UO2SO4 system.

The development of nuclear reactors and other sources of nuclear particles has provided the analyst with a new method which has been successfully applied to the determination of microgram and even submicrogram quantities of many elements. In this method, known as "radioactivation analysis," the element to be determined is "activated" through some type of nuclear reaction which produces a radioactive isotope of the element. Since the radioisotope produced decays with its own characteristic radiation and half-life, it is possible, through radiochemical measurements following radioactivation, to devise a method of analysis which is very specific for particular elements. Whenever necessary, the radioisotope is separated by chemical means and its radioactivity is then measured by some type of radiation counter.

In order to test the effect of chromate ion on the corrosion of Zircaloy-2, a 0.04 m uranyl sulfate solution (enriched) containing added acid, copper sulfate and 557 ppm of Cr (VI) was autoclaved with rocking at 280 degrees C for about eight days in the HB-5 facility of the LITR. The average corrosion rate established by the rate of consumption of oxygen was 9.9 mpy at a power density of 4.9 w/ml. It is indicated by comparison with a previous corrosion study under LITR radiation that the presence of Cr (VI) had no significant effect on the radiation corrosion of Zircaloy-2 by enriched uranyl sulfate solutions. However, the data are not conclusive and may be interpreted as showing a low corrosion rate for a limited period (i.e. a short term inhibition) followed by correspondingly rapid corrosion.

A general program has been written to plot curves on the Oracle curve plotter. The supplement includes changes to slow down some of the loops and minimize the possibility of read-around errors and changes to handle special cases.

A qualitative theory for cake formation in ThO2 slurries is presented. The sphere formation which occurs in "Standard" slurry can be explained on the same basis. The irregular and unpredictable yield strength is easily fitted into the theory. On the basis of this theory, the writer has been led to the conclusion that only colloidally stable slurries, or slurries with crystallites or comminution-resistant particles which are large enough to overcome colloidal effects (probably larger than 0.1u) can be used with assurance in the ThO2 reactor system. This conclusion holds for 300 gm/kg slurries as well as for more concentrated mixtures.

In analyzing stresses, deflections, and forces in piping and certain structural systems, it is useful to have a set of equations giving the deflections at any point of a curved beam in terms of the various loads acting on the beam. This technical report presents the deflection equations for a curved circular-arc beam of variable length. The cases treated include in-plane and out-of-plane bending due to forces and moments applied to the end of the beam in three principal directions, and uniformly distributed loads applied along the beam in these three directions. Deflections were calculated by the strain energy method using Castigliano's theorem.

The operation of the HRT mockup was on 0.042m UO2SO4, 0.024m H2SO4, and 0.005m CuSO4 at 280 C and 1400 psi pressure. with the O2 content at near 500 ppm. The pump showed bearing wear and high corrosion. The letdown heat exchanger was removed from the mockup and sectioned. The metallographic examination revealed corrosion. Results of corrosion runs on Ti, zircaloy-2, and stainless steel are given.

During the development of in-reactor corrosion experiments three types of bomb designs have been developed for following quantitatively the consumption of oxygen in a bomb which is fabricated from the particular metal under test. The bombs are designed so as to be rocked continuously during their in-reactor exposure, consequently agitating the uranium salt solution contained in the bomb and permitting gentle movement of the solution past metal specimens and other corroding surfaces. The oxygen pressure is produced within the bomb at the beginning of the run either by the withdrawal of gas from an oxygen tank or by the decomposition of hydrogen peroxide added just prior to closure. Temperature measurements are obtained by mans of thermocouples placed in a well within the bomb body or, in the latest design, there will also be thermocouples staked at several points on the outer wall of the bomb. The assembly is inserted in an experimental access hole in the reactor, brought up to a predetermined operating temperature by means of an electric furnace in close contact with the bomb, and allowed to remain for the desired amount of exposure to reactor radiation. Periodic measurements of temperature and pressure are made and the bomb …