This report follows the study of the oxidation of plutonium III and IV to the plutonyl state.

This report discusses methods for preparing thin films of plutonium on metallic disks, which are used for alpha energy analysis, fission counting, and preparation of geometry standards in ordinary counting. Various methods of preparation were tested and analyzed, but electrodeposition was the most effective method. Deposition was then tested, but the yields were "somewhat erratic".

Part I of this report covers critical-mass determinations for pseudospheres of oralloy hydride composition (approximating UH3) in 8"-thick Tu and Ni tampers and in the Tu tamper with Ni liner. The critical mass of a hydride cube in the thick Tu also is given. Data on weight and dimensional changes of hydride pieces during the period of use are included. In Part II are presented the results of Rossi time-scale measurements on the hydride assemblies. Values of alpha at delayed critical and its variation with mass in the neighborhood of delayed critical are given. Measurements on the activation of various detectors within the hydride assemblies are described in Part III. Results as a function of radial position are given for Au, for Au shielded by Au and by Cd, for S and for fission catchers with U235 and U238. Reactivity changes resulting from the introduction of foreign materials into the hydride assemblies are discussed in Part IV. Apparent regularities with respect to Z and qualitative interpretations of variations with radius are pointed out. From data for various radial positions, changes in critical mass corresponding to small changes in composition and density are computed.

The following report examines a rapid method used to eliminate the possibility of explosive perchlorate-organic mixtures in a control laboratory in order to determine radiocesium. These methods include the usage of chloroplatinic acid as a precipitate of radocesium.

Technical report summarizing one phase of work done to develop methods of bonding uranium to a metal which is a good conductor of heat. Silver was chosen for contact with uranium because it is easy to plate on uranium and there is no danger of brittle Ag-U compounds being formed at elevated temperatures. [From Abstract]

Introduction: "A limited test progress for the evaluation of type 347 stainless steel pipe which failed the Huey (?) test has been complicated. The tests reported herein were similar in scope to those reported in document number EW-20765, Corrosion Tests on Stainless Steel Plate, Waste Metal Recovery Process. Material tested was obtained on order number EWC-8553, National Tube Company Heat #3X9741. Lots 9789 and 9790."

This report provides fundamental equations and maps to calculate neutron behavior in a spherical cavity.

The following report provides the results of an accelerated corrosion test that was performed to compare the effect of two coagulants on the corrosion rates of aluminum slug jacket alloy and 72S. Additionally, some analytical data on the water from the two treatments were obtained and are presented in this report.

The following report provides measurements of the crystalline structure of neptunium metal.

In solving the two-group, two medium equations for neutron diffusion in a finite one-dimensional multiplying system, the equations in each medium can be solved, and the boundary conditions used to determine the coefficients. This direct attack involves eight simultaneous linear equations. The opportunities for error are numerous, and, frequently, a great deal of accuracy is lost by subtractions; hence, it is felt that an alternative method of solution, in which numerical errors would be less likely to occur, would be desirable.

A neutron burst from an untamped cylindrical Oy assembly occurred at the Pajarito Remote Control Laboratory at 1800 hours on 18 April 1952. The circumstances causing the burst and a description of the assembly involved are given There was no personnel hazard. Normal operations could have been resumed on other assemblies withing two or three hours after the burst. No evidence of damage to the oy was observed. It was determined that the burst resulted in 1.5 x 10(16) fissions in the oy. Also reported are some results of the computations and post-burst tests and a discussion of probable time behavior of power level during the burst.

Abstract: "The amount of hydrogen normally present in zirconium and zirconium alloys suffices to reduce their ductility greatly in an impact test at room temperature, after slow cooling from 600 F. Quenching from 600 F or above gives high impact strength, as does removal of hydrogen by high-temperature vacuum annealing. This report discusses the evidence on hydrogen embrittlement, the diffusion, solid solubility, and equilibrium pressure of hydrogen of hydrogen in zirconium, the microstructure, and the effects of hydrogen and heat treatment on the mechanical properties of zirconium."

The leaching behavior, thickening and filtering characteristics and recovery of uranium from high grade uranium ore from Rum Jungle, Northern Territory, Australia are described.

This quarterly progress report discusses ongoing work at the Metallurgy Division at the Oak Ridge National Laboratory. Topics discussed include thorium research, the preferred orientation of uranium, studies in the ceramics laboratory, the homogenous reactor program, studies in the x-ray laboratory, studies in the metallographic laboratory, the experimental plate-cladding program, and fuel and control element fabrication.

From abstract: "An investigation of the radiation stabilities of aqueous solutions of sodium ethylenediamine tetraacetate and sodium acetate was made using a 3000-curie Co⁶⁰ source...A study of the behavior of the standard-size Beckman type glass pH electrodes in a solution containing 0.36 curie of Ce¹⁴⁴-Pr¹⁴⁴ activity per milliliter showed the useful electrode life to be of the order of two to eight days."

Introduction: "Based on experimental data and on conservative theoretical considerations, an estimate has been made of the relation of the mining U-235 critical mass to the hydrogen moderation for uranium material at the U-235 assays for which experimental information is available. These estimates have been used in indicating maximum safe amounts for conditions where definite moderation limitations can be established."

This report discusses preliminary results acquired from investigations made on the ultrasonic properties of uranium, such as sonic vibrations in the megacycle frequency range.

Summary of research progress meetings of October 2 and October 9, 1952: High speed high vacuum ion pump, High energy ion irradiation, Space charge accelerator for protons, Availability of the [ ] meson beam at the cyclatron, Effect of chemical structure on stopping powers for high energy protons.

Abstract: "The mechanical properties and corrosion resistance of induction-melted, zirconium-tin alloys have been determined. The alloys investigated contained from zero to five per cent tin and up to 0.3% carbon. The zirconium used was United States Bureau of Mines sponge zirconium. The mechanical properties investigated include the tensile, hot-hardness, and impact properties."

The method of spherical harmonic tensors developed Mark for solving the Boltzmann transport equation in isotropic media is herein extended to anisotropic media for cylindrical geometry. A formal solution is given for the case of two concentric cylindrical media, A and B, but no numerical work has yet been done. The following treatment differs from a similar one by the H. K. Ferguson Co. in that the external medium B is assumed to be both a neutron absorber and finite in extent rather than a non-absorber and infinite in extent.

From introduction: "The following recommendations represent the best estimate, based on present knowledge, of the requirements for generally applicable or "universal" instrument for the continuous monitoring of radioactive process streams in terms of their gamma activity."

This report follows calculations performed to determine the effect of epithermal capture on the value of eta to be used in lattice calculations.

Abstract: "A method is described for determining moisture on uranium and uranium oxides. This method should also be applicable to solid samples which, when heated, do not decompose to form water or liberate a substance which will react with Fischer's reagent. The method should be especially applicable to samples which are insoluble in alcohol or Karl Fischer reagent under normal titration conditions, or which will themselves react with the reagent. The amount of moisture on uranium and uranium oxide was found to be 0.02% except when the oxide was found to be 0.02% except when the oxide source was uranyl sulfate. In this case, the moisture content was found to be 0.1%. Modifications of the procedure and apparatus are presented for improving the accuracy and shortening the time necessary for the determination."

The decontamination of portable instruments by the Calibration Unit has presented a problem for some time. Most of the contamination is in the 100 to 500 c/m or 500 to 2000 d/m range. Higher levels of contamination can usually be reduced to these levels, but further cleaning proves quite difficult