The design of high power UV laser systems is limited to a large extent by the laser-initiated damage performance of transmissive fused silica optical components. The 3{omega} (i.e., the third harmonic of the primary laser frequency) damage growth mitigation LDRD effort focused on understanding and reducing the rapid growth of laser-initiated surface damage on fused silica optics. Laser-initiated damage can be discussed in terms of two key issues: damage initiated at some type of precursor and rapid damage growth of the damage due to subsequent laser pulses. The objective of the LDRD effort has been the elucidation of laser-induced damage processes in order to quantify and potentially reduce the risk of damage to fused silica surfaces. The emphasis of the first two years of this effort was the characterization and reduction of damage initiation. In spite of significant reductions in the density of damage sites on polished surfaces, statistically some amount of damage initiation should always be expected. The early effort therefore emphasized the development of testing techniques that quantified the statistical nature of damage initiation on optical surfaces. This work led to the development of an optics lifetime modeling strategy that has been adopted by the NIF project to …

This document defines the detailed NIF full system shot procedure to obtain 8% power balance as specified by the SDR002 3.2.1.04. Because the 48 quads of the NIF will be set up over a period of five years, obtaining power balance will naturally be accomplished in two steps. First, as each quad is brought online, the four laser beams within each quad will be tuned by setting the PABTS splitter ratios so that each beam will give the same laser power on target during low energy square pulse shots. During the quad activation period all of the technical tools and procedures will be developed that are needed for attaining full laser power balance. After the initial settings of the 48 PABTS, if no other tuning is done the overall NIF power balance is expected to be about <15%. In the second step, an iteration procedure with approximately 18 full laser system shots will be needed to obtain 8% power balance by tuning out the remaining systematic differences among the quads to an acceptable small difference of 2% rms (at 3{omega}). This rms difference is smaller than the expected variation of the injection energy or the amplifier gain, and is also …

A 60 TeV center of mass hadron collider is proposed, which has capability of using Superbunch beam. With Superbunch beam, the luminosity is expected to be increased by a factor of 20, compared with conventional acceleration using RF cavities. This hadron collider will be built in two stages with a low field magnet ring first and a high field magnet ring later in the same tunnel. The low field magnet rig will be built with Pipetron scheme, with 7 TeV and 7 TeV proton beams, making a 14 TeV center of mass energy high luminosity collider, using Superbunch beams. In the second stage 10 Tesla high field magnets with twin beams, will be installed. It also utilizes Superbunch beams, realizing high luminosity collider. To accelerate Superbunch beams, the barrier bucket and acceleration induction cells will be used, which are made of induction cells, utilizing FINEMET material. The core loss of the FINEMET is estimated for the whole collider is estimated. The synchrotron radiation of the collider is also estimated. Merits of Superbunch beams over RF bunched beams for the high energy experiments is described.

The proposed Next Linear Collider (NLC) will require over 1400 adjustable quadrupoles between the main linacs' accelerator structures. These 12.7 mm bore quadrupoles will have a range of integrated strength from 0.6 to 138 Tesla, with a maximum gradient of 141 Tesla per meter, an adjustment range of +0 to {minus}20% and effective lengths from 324 mm to 972 mm. The magnetic center must remain stable to within 1 micron during the 20% adjustment. In an effort to reduce costs and increase reliability, several designs using hybrid permanent magnets have been developed. Four different prototypes have been built. All magnets have iron poles and use Samarium Cobalt to provide the magnetic fields. Two use rotating permanent magnetic material to vary the gradient, one uses a sliding shunt to vary the gradient and the fourth uses counter rotating magnets. Preliminary data on gradient strength, temperature stability, and magnetic center position stability are presented. These data are compared to an equivalent electromagnetic prototype.

The main objective of this project is for a university-industry consortium to develop a comprehensive model for fracture carbonate reservoirs based on the ''data cube'' concept using the Michigan Basin as a prototype. This project combined traditional historical data with 2D and 3D seismic data as well as data from modern logging tools in a novel way to produce a new methodology for characterizing fractured reservoirs in carbonate rocks. Advanced visualization software was used to fuse the data and to image it on a variety of scales, ranging from basin-scale to well-scales.

Alternative Fuel News, an ongoing quarterly publication for the U.S. Department of Energy. An official publication of the Clean Cities Network and the Alternative Fuels Data Center.

This report documents material balance calculations for the Americium/Curium vitrification process and describes the basis used to make the calculations.

This report discusses the Better Education for Students and Teachers Act, which would eliminate the requirement for educational services to children with disabilities in certain situations.

Power in American national government is decentralized, divided, dispersed, and limited. This distribution of power derives in part from the Constitution, through limitations imposed on the government, the system of checks and balances among the three branches, and independent bases of support and authority for each branch. This report, which examines these elements, will be updated as developments require.

The small asymmetries measured at G{sub {gamma}} = 7.5 during the RHIC spin commissioning were a serious concern. In earlier runs, asymmetries double those from the spin commissioning time (September 2000) had sometimes been observed, and there had been few changes to the AGS polarimeter hardware or operating conditions. Recently, the observed changes in the asymmetries measured at G{sub {gamma}} = 7:5 have been ascribed to contamination of the carbon target asymmetry with that from the fishline target and vice-versa, because of the sizeable beam spot size compared to the separation of the targets. This note addresses this hypothesis using the observed asymmetries. This problem could directly impact spin physics at RHIC.

This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

This annual progress and performance evaluation report discusses the groundwater remedial actions in the 100 Area, including the interim actions at the 100-HR-3 and 100-KR-4 Operable Units, and also discusses the expedited response action in the 100-NR-2 operable unit.

Progress in development of CFD models has shown their great potential for prediction of air flow, heat dissipation, and dispersion of air pollutants in the urban environment. Work at Lawrence Livermore National Laboratory has progressed using the finite element code FEM3 which has been ''massively parallelized'' to produce flow fields and pollutant dispersion in a grid encompassing many city blocks and with high resolution. While it may be argued that urban CFD models are not yet economical for emergency response applications, there are many applications in assessments and air quality management where CFD models are unrivaled in the level of detail that they provide. We have conducted field experiments to define the flow field and air tracer dispersion around buildings as a means of critiquing and evaluating the CFD models. The first experiment, the ''B170 study'', was a study of flow field, turbulence, and tracer dispersion in separation zones around a complex, single building. The second was the URBAN 2000 experiment in downtown Salt Lake City where flow fields and tracers were studied in nested resolution from the single building scale up to larger scales of 25 city blocks, and out to 6 km. For the future an URBAN 2003 …

A new method that combines staggered grid Arbitrary Lagrangian-Eulerian (ALE) techniques with structured local adaptive mesh refinement (AMR) has been developed for solution of the Euler equations. This method facilitates the solution of problems currently at and beyond the boundary of soluble problems by traditional ALE methods by focusing computational resources where they are required through dynamic adaption. Many of the core issues involved in the development of the combined ALEAMR method hinge upon the integration of AMR with a staggered grid Lagrangian integration method. The novel components of the method are mainly driven by the need to reconcile traditional AMR techniques, which are typically employed on stationary meshes with cell-centered quantities, with the staggered grids and grid motion employed by Lagrangian methods. Numerical examples are presented which demonstrate the accuracy and efficiency of the method.

The United States and Russia signed the second Strategic Arms Reduction Treaty (START II) on January 3, 1993. This report presents the background on the Russian parliament approval of the START II ratification. The report also discusses the linkage between U.S. withdrawal from ABM treaty and Russia’s possible withdrawal from START II. It discusses the alternative approaches for the United States and the future for the U.S.-Russian arms control process.

Argonne has developed a series of automated protocols to generate bacterial expression clones by using a robotic system designed to be used in procedures associated with molecular biology. The system provides plate storage, temperature control from 4 to 37 C at various locations, and Biomek and Multimek pipetting stations. The automated system consists of a robot that transports sources from the active station on the automation system. Protocols for the automated generation of bacterial expression clones can be grouped into three categories (Figure 1). Fragment generation protocols are initiated on day one of the expression cloning procedure and encompass those protocols involved in generating purified coding region (PCR).

EQ6 users have difficulties tracking isotopic concentrations in a system with chemical and nuclear decay reactions. The capability to track isotopic concentrations is particularly important for simulating the degradation of the spent nuclear fuels. Isotopic tracking is necessary to evaluate the criticality risk associated with fissile material relocation inside of a disposal container. A code called ASPRIN (Automatic Software PRocessing, Inventories of Nuclides) was created to allow isotopic tracking using the results of EQ6 simulations.

Newsletter of the Texas Agricultural Extension Service discussing topics related to economic aspects of raising dairy cows, dairy production, and managing dairy operations.

Beam-induced radiation effects have been simulated for 20 and 50 GeV muon storage rings designed for a Neutrino Factory. It is shown that by appropriately shielding the superconducting magnets, quench stability, acceptable dynamic heat loads, and low residual dose rates can be achieved. Alternatively, if a specially-designed skew focusing magnet without superconducting coils on the magnet's mid-plane is used, then the energy is deposited preferentially in the warm iron yoke or outer cryostat layers and internal shielding may not be required. In addition to the component irradiation analysis, shielding studies have been performed. Calculations of the external radiation were done for both designs but the internal energy deposition calculations for the 20 GeV Study-2 lattice are still in progress.

Under the auspices of the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) developed a comprehensive program to evaluate state-of-the-art methods and computer programs for seismic analysis of typical coupled nuclear power plant (NPP) systems with nonclassical damping. In this program, four benchmark models of coupled building-piping/equipment systems with different damping characteristics were analyzed for a suite of earthquakes by program participants applying their uniquely developed methods and computer programs. This paper presents the results of their analyses, and their comparison to the benchmark solutions generated by BNL using time domain direct integration methods. The participant's analysis results established using complex modal time history methods showed good comparison with the BNL solutions, while the analyses produced with either complex-mode response spectrum methods or classical normal-mode response spectrum method, in general, produced more conservative results, when averaged over a suite of earthquakes. However, when coupling due to damping is significant, complex-mode response spectrum methods performed better than the classical normal-mode response spectrum method. Furthermore, as part of the program objectives, a parametric assessment is also presented in this paper, aimed at evaluation of the applicability of various analysis methods to problems with different dynamic characteristics unique to coupled NPP systems. …

This report outlines U.S. military operations in Bosnia and discusses issues such as U.S. and Allied Participation in Bosnia Peacekeeping (IFOR/SFOR), duration, cost, arms control and military assistance. This report also includes most recent development, background analysis, and legislation.