This project revolves around understanding the fundamental processes involved in the catalytic removal of harmful oxygenated organics present in coal liquids. We are modelling the complex type of sulfided Mo catalyst proposed for these reactions with simple single crystal surfaces. These display a controlled range and number of reaction sites and can be extensively characterized by surface science techniques. We then investigate the reaction pathways for representative simple oxygenates upon these surfaces.

This report describes the work done by Science Applications International Corporation to study the effects of energetic particles on the microstability of a high temperature tokamak. The effects of an energetic population on ballooning modes in a large aspect ratio, shifted circular flux surface tokamak equilibrium are investigated with the newly developed gryokinetic numerical technique. The gryokinetic equations for the background ion and electron, as well as that of the energetic population are solved directly as an initial problem. The energetic particles are modeled with a slow-down distribution in energy. It is found that the ballooning mode stability of the plasma with an energetic species of increasing concentration does not differ much from an increase in the background plasma beta, except for possible energetic particle drift resonances. This result is encouraging to the idea that energetic particles such as alphas may be used to stabilize the ballooning modes in a fusion reactor.

Plastic crystal behavior is observed in semiconducting CsPb and NaSn at high temperature (600 and 500 C, respectively). This behavior is associated with M{sub 4}{sup 4{minus}} or A{sub 4}M{sub 4} structural units orientationally disordering about 50 C below the melting point where translational disorder sets in. This orientational disorder is different in the two phases, exhibiting jump reorientations in CsPb and a more isotropic behavior in NaSn. In other Zintl compounds such as KPb, there is a single melting point where orientational and translational disorder sets in simultaneously; the classification of the different Zintl compounds into these two different kinds of behavior will require calorimetry or neutron diffraction below the melting point. (DLC)

Melter feed preparation processes, incorporating a final wash of the precipitate slurry feed to Defense Waste Processing Facility (DWPF) and a partial substitution of the SRAT formic acid requirement with nitric acid, should not produce peak hydrogen generation rates during Cold Chemical Runs (CCR's) and radioactive operation greater than their current, respective hydrogen design bases of 0.024 lb/hr and 1.5 lb/hr. A single SRAT bench-scale process simulation for CCR-s produced a DWPF equivalent peak hydrogen generation rate of 0.004 lb/hr. During radioactive operation, the peak hydrogen generation rate will be dependent on the extent DWPF deviates from the nominal precipitate hydrolysis and melter feed preparation process operating parameters. Two actual radioactive sludges were treated according to the new flowsheets. The peak hydrogen evolution rates were equivalent to 0.038 and 0.20 lb/hr (DWPF scale) respectively. Compared to the formic acid -- HAN hydrolysis flowsheets, these peak rates were reduced by a factor of 2.5 and 3.4 for Tank 15 and Tank 11 sludges, respectively.

In order to minimize solids deposition in the off-gas line between the primary film cooler and the quencher, Savannah River Laboratory (SRL) recommended earlier that a new DWPF melter off-gas jumper be built which would increase the off-gas velocity from less than 40 ft/s under the original design to at least 55 ft/s, excluding the melter air inleakage. Two design changes proposed for the new jumper were: (1) relocation of the entry point for the melter pressure control air from the current position near the quencher to near the film cooler exit, and (2) reduction of the inside diameter of the jumper from 8.33 to 7.156 inches. The objective of this study was to confirm the, optimum inside diameter (I.D.) proposed earlier and determine the upper and lower limits for the optimum, I.D. to initiate the actual design process. Based on more conservative bases for optimization used in this study, it was determined that the design limits for the new jumper I.D. is 7.15 [le] I.D. [le] 7.25 inches.

We present the results of a measurement to understand the effects of transverse misplacement of the [sup 137]Cs source tube inside the cast Pb plates of the SDC EMC calorimeter. The PMT current from a scintillator was measured as the [sup 137]Cs source was displaced by varying thicknesses of Pb, as well as varying thicknesses of air gap. At a nominal depth of 2 mm in Pb, we find a change in scintillator output of about 25%/mm, and about 10%/mm of air gap. The data are compared to a simple calculation. By taking the sum of the scintillators on top and below a source tube, we estimate a source tube displacement of [plus minus]450[mu] will cause an error in the PMT output by 1%.

This document recommends an interim dilution strategy for the low nitrite precipitate hydrolysis process. A minimum carbon dioxide purge rate of 27 scan during feeding and for 15 minutes after feeding and a maximum precipitate slurry feed rate of 36 gpm are recommended. These recommendations provide an interim dilution strategy that will provide for the start of cold chemical runs and until additional offgas data is collected from the PHEF (Precipitate Hydrolysis Experimental Facility).

This document reviews results from a number of studies concerning underground migration of radionuclides from nuclear test cavities at the Nevada Test Site (NTS). Discussed are all cases known to the Department of Energy's Hydrology and Radionuclide Migration Program where radionuclides have been detected outside of the immediate vicinity of nuclear test cavities that are identifiable as the-source of the nuclides, as well as cases where radionuclides might have been expected and were intentionally sought but not fixed. There are nine locations where source-identifiable radionuclide migration has been detected, one where migration was purposely induced by pumping, and three where migration might be expected but was not found. In five of the nine cases of non-induced migration, the inferred migration mechanism is prompt fracture injection during detonation. In the other four cases, the inferred migration mechanism is water movement. In only a few of the reviewed cases can the actual migration mechanism be stated with confidence, and the attempt has been made to indicate the level of confidence for each case. References are cited where more information may be obtained. As an aid to future study, this document concludes with a brief discussion of the aspects of radionuclide migration that, …

This document contains the first quarterly technical progress report for PTI's Bench-Scale Testing Project of a circuit integrating PTI's KEN-FLOTETM Column Flotation Technology and PTI's On-Line Quality Monitor Control System. The twelve-month project will involve installation of a 300 lb/hr. bench-scale testing circuit at PETC's Coal Preparation Process Research Facility (CPPRF) and testing of two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). Figure 1 contains the project plan as well as the approach to completing the major tasks within the twelvemonth project. The project is broken down into three phases, which include: Phase I - Preparation: The preparation phase was performed principally at PTI's Calumet offices from October through December, 1992. It involved building of the equipment and circuitry, as well as some preliminary design and equipment testing. Phase II - ET Circuit Installation and Testing: This installation and testing phase of the project will be performed at PETC's CPPRF from January through May, 1993, and will be the major focus of the project. It will involve testing of the continuous 300 lb/hr. circuit. Phase II - Project Finalization: The project finalization phase will occur from June through September, 1993, at PTI's Calumet offices and will …

Twenty tests for normality were compared for the purpose of detecting mixtures of two normal components with unequal means but equal variance. The purpose of this study was to determine the power of tests specifically designed to detect mixtures, i.e., the likelihood ratio and Engelman-Hartigan tests, relative to other tests for normality. We considered the entire range of mixing proportions [pi], 0 < [pi] < 1. For mixtures that are nearly symmetric (0.35 < [pi] < 0.65) the Engelman-Hartigan test was the most powerful. When [pi] > 0.85 or [pi] < 0.15, [radical]b[sub 1] was among the best tests. For intermediate mixing proportions, the likelihood ratio test was best. For situations in which the preferred test had power 50% or more, the power of the likelihood ratio test was also above 50% and within 15 percentage points of the preferred test.

A laser flash photolysis kinetic study of 2,2{prime}-bipyridine bidentate chelating ligands with one claw in the first coordination sphere of a molybdenum carbonyl complex has been completed at pressures up to 150 MPa. The reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2{prime}-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Stability constants for lithium ion complexes with crown ethers in a room temperature molten salt, fluorescence quantum yields for cresyl violet and several other dyes in solution, and the oxidation of alcohols by OsO{sub 4} have also been investigated.

Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician's point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether a question on a driver's license renewal form inquiring as to whether the applicant has had problems with alcohol or drug abuse is valid (RQ-90)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Refund of franchise tax collections to banking corporations, and related questions (RQ-2127)

The present DWPF flowsheet calls for the chemical treatment of waste sludge with 90 wt% formic acid prior to the addition of the Precipitate Hydrolysis Aqueous (PHA) product. An alternative processing methodology, denoted the ``Nitric Acid Flowsheet``, has been proposed. In the application of this flowsheet, nitric acid would be used to neutralize sludge base components (hydroxides and carbonates) prior to the addition of late wash PHA. The late wash PHA will contain sufficient quantities of formic acid to adequately complete necessary reduction-oxidation (REDOX) reactions.

The present DWPF flowsheet calls for the chemical treatment of waste sludge with 90 wt% formic acid prior to the addition of the Precipitate Hydrolysis Aqueous (PHA) product. An alternative processing methodology, denoted the ``Nitric Acid Flowsheet``, has been proposed. In the application of this flowsheet, nitric acid would be used to neutralize sludge base components (hydroxides and carbonates) prior to the addition of late wash PHA. The late wash PHA will contain sufficient quantities of formic acid to adequately complete necessary reduction-oxidation (REDOX) reactions. The use of this flowsheet may result in a change in the nominal concentrations of two of the major REDOX reaction participants: formate (HCOO{sup minus}) and nitrate (NO{sub 3}{sup minus}).

Twenty tests for normality were compared for the purpose of detecting mixtures of two normal components with unequal means but equal variance. The purpose of this study was to determine the power of tests specifically designed to detect mixtures, i.e., the likelihood ratio and Engelman-Hartigan tests, relative to other tests for normality. We considered the entire range of mixing proportions {pi}, 0 < {pi} < 1. For mixtures that are nearly symmetric (0.35 < {pi} < 0.65) the Engelman-Hartigan test was the most powerful. When {pi} > 0.85 or {pi} < 0.15, {radical}b{sub 1} was among the best tests. For intermediate mixing proportions, the likelihood ratio test was best. For situations in which the preferred test had power 50% or more, the power of the likelihood ratio test was also above 50% and within 15 percentage points of the preferred test.

The computer code FLOWTRAN-TF is used to analyze hypothetical hydraulic accidents for the nuclear reactor at the Savannah River Site. During a hypothetical Large Break Loss-of-Coolant Accident (LOCA), reactor assemblies would contain a two-phase mixture of air and water which flows downward. Reactor assemblies consist of nested, ribbed annuli. Longitudinal ribs divide each annulus into four subchannels. For accident conditions, air and water can flow past ribs from one subchannel to another. For FLOWTRAN-TF to compute the size of those flows, it is necessary to know the local void fraction in the region of the rib. Measurements have previously been made of length-average void fraction in a ribbed annulus. However, no direct measurements were available of local void fraction. Due to the lack of data, a test was designed to measure local void fraction at the rib. One question addressed by the test was whether void fraction at the rib is solely a function of azimuthal-average void fraction or a function of additional variables such as pressure boundary conditions. This report provides a discussion of this test.

This project revolves around understanding the fundamental processes involved in the catalytic removal of harmful oxygenated organics present in coal liquids. We are modelling the complex type of sulfided Mo catalyst proposed for these reactions with simple single crystal surfaces. These display a controlled range and number of reaction sites and can be extensively characterized by surface science techniques. We then investigate the reaction pathways for representative simple oxygenates upon these surfaces. We have successfully solved the structure of Mo(110) p(2 {times} 2)-S structure and found the S atom to reside very close to the center-hollow site of a laterally-distorted first Moo layer. Some small vertical distortions in the top two Mo layers are also present. Preliminary results from experiments carried out with substituted furans indicate that the pattern of reaction is very similar to that of furan itself. The most significant change appears to that substitution beyond the mono stage results in substantial blocking of the adsorption process.

Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician`s point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

In order to minimize solids deposition in the off-gas line between the primary film cooler and the quencher, Savannah River Laboratory (SRL) recommended earlier that a new DWPF melter off-gas jumper be built which would increase the off-gas velocity from less than 40 ft/s under the original design to at least 55 ft/s, excluding the melter air inleakage. Two design changes proposed for the new jumper were: (1) relocation of the entry point for the melter pressure control air from the current position near the quencher to near the film cooler exit, and (2) reduction of the inside diameter of the jumper from 8.33 to 7.156 inches. The objective of this study was to confirm the, optimum inside diameter (I.D.) proposed earlier and determine the upper and lower limits for the optimum, I.D. to initiate the actual design process. Based on more conservative bases for optimization used in this study, it was determined that the design limits for the new jumper I.D. is 7.15 {le} I.D. {le} 7.25 inches.