A method was developed to establish a numerically controlled tool path with respect to the work spindle centerline. Particularly adapted to the diamond turning of optics, this method is based upon interferogram analysis and is applicable to the establishment of the work spindle centerline relative to the tool path for any center-turned optic having a well-defined vertex radius of curvature. The application reported is for an f/2 concave spherical mirror.

Currently, direct fuel rho r measurements on Inertial Confinement Fusion (ICF) targets by neutron activation of the argon tracer gas mixed with the DT fuel would require a 100 fold increase in neutron yield. Bromine, on the other hand, has excellent properties for neutron activation analysis at neutron yields of 10two' to 10/sup 8/, when present at an internal pressure of from 0.1 to 0.2 atmospheres. Bromine addition is accomplished in a 2 furnace system using the dried-gel method of microsphere production. An upper furnace operated at 1500/sup 0/C is separated from a lower furnace by a cooled zone. The lower furnace is filled with bromine gas and operated at approximately 1250/sup 0/C. The upper furnace is the glass production furnace. The cooled zone in between the upper and lower furnace is to prevent the hot bromine gas from rising into the upper furnace. The microspheres pass through the cooled zone and immediately into the 1250/sup 0/C bromine furnace where the bromine permeates into the spheres.

The High Field Test Facility (HFTF), presently under construction at LLNL, is a set of superconducting coils that will be used to test 1-m-o.d. coils of prototype conductors for fusion magnets in fields up to 12 T. The facility consists of two concentric sets of coils; the outer set is a stack of Nb-Ti solenoids, and the inner set is a pair of solenoids made of cryogenically-stabilized, multifilamentary Nb/sub 3/Sn superconductor, developed for use in mirror-fusion magnets. The HFTF system is designed to be parted along the midplane to allow high-field conductors, under development for Tokamak fusion machines, to be inserted and tested. The background field coils were wound pancake-fashion, with cold-welded joints at both the inner and outer diameters. Turn-to-turn insulation was fabricated at LLNL from epoxy-fiberglass strip. The coils were assembled and tested in our 2-m-diam cryostat to verify their operation.

This document is issued quarterly for the purpose of summarizing the radioactive gaseous wastes that are discharged from the facilities of the Rockwell Hanford Operations (Rockwell). Data on alpha and beta emissions during 1979 are presented where relevant to the gaseous effluent. Emission data are not included on gaseous wastes produced within the 200 areas by other Hanford contractors.

Progress is reported on research in the areas of radiation protection and industrial hygiene. Subject areas include: (1) basic computer programs for counting room automation; (2) a computing portable neutron spectrometer; (3) preliminary measurements of the neutron energy response of CR-39 carbonate plastic; (4) effect of high-expansion foam on self-1 contained breathing apparatuses; (5) permeation of organic solvents through glove samples; (6) determining neutron dose rates and 9-to-3 in. sphere ratios from a moderated 252Cf source in the LLL Calibration Facility; (7) application of the AERIN computer code to two americium inhalation exposures; and (8) air- and soil-sampling program at Site 300's high-explosive test bombers. (ACR)

Experimental results on ion-cyclotron waves observed in the 2XIIB mirror machine are reviewed, and relevant theoretical work is discussed. The work reported generally substantiates the quasilinear diffusion model of mirror-plasma confinement, but also suggests alternatives. The end-loss current required by theory of the drift-cyclotron loss-cone (DCLC) instability agrees with measurements of this current. The experiment indicates that an increased ratio of plasma radius to ion gyroradius improves plasma confinement. However, measurements sometimes show a second ion-cyclotron mode, which is not the DCLC mode. Theoretical work on loss-cone instabilities has concentrated on linear, quasilinear, and fully nonlinear models of increased sophistication and experimental applicability.

On Shiva the beam energy along the chain is monitored using available reflections and/or transmission through beam steering, splitting, and polarizing optics without the intrusion of any additional glass for diagnostics. On the preamp table the diagnostic signal is obtained from the signal transmitted through turning mirrors. At the input of each chain the signal is obtained from the transmission through one of the mirrors used for the chain input alignment sensor (CHIP). At the chain output the transmission through the final turning mirror is used. These diagnostics have proved stable and reliable. However, one of the prime diagnostic locations is at the output of the beta rod. The energy at this location is measured by collecting small reflections from the last polarizer surface of the beta Pockels cell polarizer package. Unfortunately, calibration of this diagnostic has varied randomly, seldom remaining stable for a week or more. The cause of this fluctuation has been investigated for the past year and'it has been discovered that polarizer reflectivity varies with humidity. This report will deal with the possible causes that were investigated, the evidence that humidity is causing the variation, and the associated mechanism.

Results from the new Tandem Mirror Experiment (TMX) are described. Tandem-mirror density and potential profiles are produced using end-plug neutral-beam injection and central-cell gas-fueling. TMX parameters are near those predicted theoretically. The end-plug electron temperature is higher than in the comparably sized single-mirror 2XIIB. Axial confinement of the finite-beta central-cell plasma is improved by the end plugs by as much as a factor of 9. In TMX, end-plug microinstability limits central-cell confinement in agreement with theory.

A broad, general review is presented of geochemical measurement techniques that can provide data necessary for site selection and repository effectiveness assessment for a radioactive waste repository in bedded salt. The available measurement techniques are organized according to the parameter measured. The list of geochemical parameters include all those measurable geochemical properties of a sample whole values determine the geochemical characteristics or behavior of the system. For each technique, remarks are made pertaining to the operating principles of the measurement instrument and the purpose for which the technique is used. Attention is drawn to areas where further research and development are needed.

Experimental and theoretical studies of field reversal in a mirror machine are reported. Plasma-gun experiments demonstrate that reversed-field plasma layers are formed. Low energy plasma flowing behind the initially produced plasma front prevents tearing of the layer from the gun muzzle. MHD simulation shows that tearing can be obtained by impeding the slow plasma flow with a plasma divider. It is demonstrated theoretically that a field-reversed mirror imbedded in a multipole field can be sustained in steady state with neutral-beam injection even in the absence of impurities. MHD stability analysis shows that growth rates of elongated reversed-field theta-pinch configurations decrease with axial extension, which indicates the importance of including finite Larmor radius in the analysis. Tilting-mode criteria are dramatically improved by proper shaping, and a problimak shape is proposed. Tearing mode stability of reversed-field theta-pinches is greatly enhanced by flux exclusion. Self-consistent, 1-1/2-dimensional transport codes have been developed, and initial results are presented.

This document represents a progress report and renewal proposal for the contract DEAS 09 79 ER10434 between the USDOE and USC. During the time from 1 July 1979 to 1 March 1980, the large 35% intrinsic Ge detector was purchased and tested, and the new hyperpure Ge detector for positron end-point-energy measurements was designed and fabricated by ORTEC. It was delivered just prior to January 1, 1980. Measurements using this special equipment began in January 1980. During this period, a new effort in the measurement of short nuclear lifetimes was completed, and nuclear structure measurements of /sup 206/Rn nd /sup 208/Rn were completed. The results of these efforts are described in the text. A search for the Post Doctoral Research Associate was started last summer and the position will be filled on or about 1 March 1980. The first experiments to measure positron end-point-energies were proposed to the ORIC scheduling committee, and measurements will begin in March 1980. Theoretical efforts describe accurately the interference of annihilation radiation with positron end-point-energy measurements were begun.

Metered energy consumption data have been collected on existing commercial buildings to help establish the proposed Building Energy Performance Standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20% above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

The connection between the cubic-to-tetragonal martensitic phase transformation and the phenomenon of superconductivity in A15 compounds is being investigated. The degradation of the critical parameters, such as T/sub c/, H/sub c2/, and J/sub c/, with mechanical straining is of particular interest. Low-temperature x-ray diffraction experiments are performed on Nb/sub 3/Sn ribbons (with the bronze layers etched off) mounted on copper and indium sample stages. The cryostat used is unique in that it has a vacuum mechanical insert which allows the superconductor to be placed under both compressive and tensile strains while at low temperatures. Preliminary results indicate that the martensitic phase transition temperature, T/sub m/, increases with compressive strains. Other effects of strain on tetragonal phase production are also discussed.

The triplet state of chlorophyll has been utilized as a nondestructive probe into the structural and dynamical nature of the photosynthetic apparatus. During the past year, using zero-field triplet state optically detected magnetic resonance spectroscopy, chlorophyll aggregates were examined in both their natural environment in vivo and in model complexes in vitro. Research efforts have focused on subchloroplast particles extracted from green plants, on chlorophyll monolayers, and on isolated chlorophyll molecules bound to both simple ligands and to complete proteins. The overall aim of the research program is to detail the physical features and interactions of the photosynthetic pigment systems through examination of structural subunits of the photosynthetic apparatus and model systems which represent them.

On December 19, 1979, a spill of SRC liquid occurred during transfer of the liquid from a storage tank to sample drums. Approximately 2,300 gallons of fluid flowed into the floor of the tank farm and infiltrated into the porous and permeable gravels at the site. Because of concern for the possible impact of the SRC fluid on the quality of ground water, surface water, and water supply sources at and near the site, GMRC commissioned Radian to evaluate the problem and recommend specific measures to mitigate any known or anticipated impacts. This report presents the results of Radian's investigations. Although ground-water contamination apparently has occurred as a result of the December 19 spill, the contamination plume is localized to the vicinity of the SRC plant and Lake Sequalitchew. A contamination plume apparently is presently moving toward Lake Sequalitchew, but the two pump wells included in the Remedial Measures Plan will arrest this movement. These wells will be pumped until phenol concentrations in the groundwater fall to acceptable levels. The source of contamination at the spill is being cut off by excavation of the contaminated soil and sealing of the floor of the tank farm. No public water supplies are …

On May 22, 1980, a symposium was held at Brookhaven to celebrate the 20th birthday of the AGS, to recall its beginnings, and to review major discoveries that have been made with its beams. The talks at the symposium are recorded in this volume.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Whether the Texas Municipal Power Agency is a public utility under the Public Utility Regulatory Act.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification: Political activities of Department of Public Safety officers

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification: Whether an optional retirement program annuity contract may provide for incidental death benefits