A report which summarizes the performance data obtained from Redox solvent extraction IC Column studies made prior to January 15, 1949 in accordance with conditions of the A.N.L. June 1, 1948, Flowsheet.

Report discussing tests of a new colorimetric method. From abstract: "A colorimetric method, which is a modification of the classical phosphomolybdic acid method, has been developed for the determination of phosphate in synthetic uranium waste solutions...The chief advantage of the method, over those presently included in HW Manuals, is the rapidity with which determinations may be carried out."

This report discusses properties of the Redox process. Density, apparent molar volumes and viscosity are all described.

"Recent surveys by the Health Instrument Section have disclosed the presence of many small radioactive spots on ground surfaces in the T and B plant areas. Investigation has shown that representative samples of the spots when mechanically separated invariably end in a single radioactive particle."

This report discusses methods for preparing thin films of plutonium on metallic disks, which are used for alpha energy analysis, fission counting, and preparation of geometry standards in ordinary counting. Various methods of preparation were tested and analyzed, but electrodeposition was the most effective method. Deposition was then tested, but the yields were "somewhat erratic".

This report follows the study of the oxidation of plutonium III and IV to the plutonyl state.

This report discusses preliminary results acquired from investigations made on the ultrasonic properties of uranium, such as sonic vibrations in the megacycle frequency range.

The following report provides the results of an accelerated corrosion test that was performed to compare the effect of two coagulants on the corrosion rates of aluminum slug jacket alloy and 72S. Additionally, some analytical data on the water from the two treatments were obtained and are presented in this report.

From introduction: "The following recommendations represent the best estimate, based on present knowledge, of the requirements for generally applicable or "universal" instrument for the continuous monitoring of radioactive process streams in terms of their gamma activity."

The following report examines a rapid method used to eliminate the possibility of explosive perchlorate-organic mixtures in a control laboratory in order to determine radiocesium. These methods include the usage of chloroplatinic acid as a precipitate of radocesium.

Introduction: "A limited test progress for the evaluation of type 347 stainless steel pipe which failed the Huey (?) test has been complicated. The tests reported herein were similar in scope to those reported in document number EW-20765, Corrosion Tests on Stainless Steel Plate, Waste Metal Recovery Process. Material tested was obtained on order number EWC-8553, National Tube Company Heat #3X9741. Lots 9789 and 9790."

The object of this study was to determine the effects of several annealing treatments and aging treatments on the tensile test behavior of Zircaloy-3b.

The Redox process uses or produces only a very few materials that are hazardous for reasons other than radioactivity. The conditions under which these materials become hazardous were carefully taken into consideration in the development of the process and design of the equipment. A considerable about of information on the hazardous properties of the process materials was obtained so that the pertinent material could be incorporated into the process specifications. Providing the equipment is operating properly and the process is being carried out within specification limits, no hazardous conditions can be created by the process. The purpose of this report is to assemble in a single, readily available document all of the information on the normal concentration limits and safe handling procedures needed to adequately control the use and storage of these materials. This report should be helpful in preparing safety bulletins and provide guidance in case of unusual incidents, malfunctioning of equipment, or contemplated changes in either the process or equipment. It is important to remember that a maximum allowable concentration (MAC) is only a limit on the concentration of a toxic material which cannot be exceeded in the air to which workers are constantly exposed to every working …

Soil chemistry studies have been carried on at Hanford for a number of years in support of the disposal of low and intermediate level liquid wastes to the ground. Equilibrium type experiments were carried out to investigate the mechanisms of the reactions of Sr, Cs, and rare earth ions with soils (1, 3, 4, 5). Experiments were also conducted with simulated and actual wastes in soil columns and an empirical method was developed for prediction of radionuclide breakthrough from ground disposal facilities into ground water on the basis of short, laboratory soil columns and equilibrium experiments (6,7). In this method it is assumed that the shape and position of the breakthrough curve is the same under laboratory conditions as in the larger scale field case. It is also assumed that the "column volume" or amount of soil effectively used for fission product sorption is that directly under a disposal facility without considering any spreading of waste solutions. These assumptions are known to be on the conservative side, but the degree of conservativeness is not known.

An anion exchange precipitation procedure was developed for the determination of Cs¹³⁷ in various aged fission product waste solutions, and other solutions containing Cs¹³⁷. The procedure is based on the ability of an anion exchange column to function simultaneously at an anion exchanger and as a precipitating agent (1).

The design criteria are written to supply information for the preparation of a project proposal covering budget item B-2265 for Fiscal Year 1956. The function of in-line instrumentation installed shall be the rapid on-the-spot analysis of process variables for quick presentation to process operators for immediate action in process control. Alarm or safety circuits may be incorporated on the equipment.

Laboratory studies have shown that the double salt, CaF2-PuF4, can be precipitated by rapid addition of hydro-fluoric acid to solutions containing 25 to 75 g Pu/1, caleium equimolar to plutonium, and 1 to 10 M HNO3. The precipitate, which is subsequently washed with water and dried to 300 degrees C in dehumidified, deoxygenated argon, can be reduced thermally by calcium to give high yields of plutonium metal.

Aid in redesign of the calibration facility in order to: 1. Reduce the rate of exposure for calibration personnel below 1 mr/hr; 2. Reduce the rate of exposure outside of the 3745 Building; 3. Reduce the risk of breaking radium sources; 4. Improve the efficiency of calibration procedures by: a. Allowing calibration to be done faster; b. Providing several calibration ranges which can operate simultaneously in the present space allowed; c. Allowing instrument survey work to proceed while calibration work is done. A well-type calibration installation is proposed and a brief description of the required shielding is included.

Report discussing information relative to the pyrophoricity of uranium for the purpose of reactor core fire safety. The report includes physical and chemical properties of uranium.

Continued process improvements in the separation plants provide an incentive for economics in waste storage costs by utilizing existing facilities to their maximum capability consistent with the radiological hazards involved. The major improvements have reduced waste volumes resulting in increased fission product concentration and energy potential. Analyses have been made to determine the effect of this change on the integrity of the existing structures.

The major portion of transfers and inventory in the Chemical Processing Department are dependent on volume measurement. Good volume measurements are therefore essential to good SS material control. Considerable attention has been given to the volume problem especially on primary transfer points. Document HW-57888 discusses the biasing effect pf temperature on manometer oil. HW- 57866 given the procedure for vessel calibration. Other undocumented correspondence has discussed recent calibrations and certain aspects of temperature considerations in the volume determinations. However, there is a need to document for future reference the consideration given temperature and provide at the same time information which covers the temperature angle on all volume methods used in the Chemical Processing Department.

The solids in Purex lww were first observed during flowsheet tests for recovery of fission products from plant wastes. Since the nature of this solid was not apparent from the flowsheet composition of lww, some work was performed to characterize this material. Although this work has been conducted over a period of about one year, it has been subordinate to the main one of testing flowsheets for fission product recovery. The solids have been observed in each of about six samples of plant lww that have been studied, and the centrifuged volume of solids has been about four percent in each case.

In order to utilize the advantages of the electron microscope for the study of respirable particles, it is desirable to have an instrument capable of sampling from atmospheres having very sparse dispersions of particles at a rate sufficiently high to result in precipitation densities of approximately one particle per 10/u² of microscope screen for a 10 minute sampling period. In order to avoid qualitative or quantitative alteration of the aerosol, it was desired that the instrument collect the sample directly on an electron microscope screen rather than on a filter material for subsequent transfer to the screen. This paper summarizes work aimed at the development of such an instrument.

Mercury to be used in polarography as a dropping mercury electrode must be of the highest purity. The author has found that much of the commercial "triple-distilled" mercury as well as that which is repurified on site is not sufficiently pure and because of this, a study of mercury purification techniques was made and a very satisfactory procedure was tested thoroughly. This procedure is described in detail in this report.