A report which summarizes the performance data obtained from Redox solvent extraction IC Column studies made prior to January 15, 1949 in accordance with conditions of the A.N.L. June 1, 1948, Flowsheet.

Report discussing tests of a new colorimetric method. From abstract: "A colorimetric method, which is a modification of the classical phosphomolybdic acid method, has been developed for the determination of phosphate in synthetic uranium waste solutions...The chief advantage of the method, over those presently included in HW Manuals, is the rapidity with which determinations may be carried out."

Abstract: "The amount of hydrogen normally present in zirconium and zirconium alloys suffices to reduce their ductility greatly in an impact test at room temperature, after slow cooling from 600 F. Quenching from 600 F or above gives high impact strength, as does removal of hydrogen by high-temperature vacuum annealing. This report discusses the evidence on hydrogen embrittlement, the diffusion, solid solubility, and equilibrium pressure of hydrogen of hydrogen in zirconium, the microstructure, and the effects of hydrogen and heat treatment on the mechanical properties of zirconium."

The following report follows the inspections of a number of eddy-current instrument procedures. The objectives of these tests were to detect both weld defects and lack of integrity of the body of the fuel elements.

The following report describes two methods of extrusion cladding of uranium fuel plates that were investigated and evaluated.

The following document presents designs and blueprints to the bubble-cap column built to replace a nitric acid concentrator.

The following report describes an experiment on the aluminum nitrate process for the conversion of tuballoy tetrafluoride to tuballoy peroxide and the solutions resulting.

Abstract: "The study of ten P.I.G. geometries with copper electrodes and d.c. voltage indicates that from a pressure of 0.1 to about 3.0 microns, depending upon the gage, there is a consistent change in the air pressure-current characteristics of a P.I.G. as the geometry and voltage are changed. At higher pressures discontinuities appear in the gage current and prohibit its use as a pressure gage. In all useful geometries, the greater the applied voltage above 1000 volts, the shorter the useful portion of the pressure-current curve became. Below 1000 volts the curve tended to be unstable. With other conditions constant, the pressure limit increased as the cathode separation decreased and as the anode diameter increased. The empirical equation for the current in certain Philips Ion Gages at certain pressures and voltages is I = a'Pe-p/b where I is the current, P the pressure, e the Naperian base and a' and b constants and dependent upon geometry and voltage."

From abstract: "In an attempt to gain some insight into the physiological condition of mice surviving massive doses of radiation, a study of their vitality was undertaken. It was assured that the ability of these animals to do forced work would be a measure of their vitality, Stimulating exposed animals to run in exercise wheels to their fullest capacity, has resulted in a demonstration of a striking vitality less during a post-irradiative period, when no other effects are demonstrable by gross examination. Mice subjected to a medium-lethal dose of fast neutrons show a continuous vitality loss over a 300 day period following exposure. Control animals show no appreciable loss of vitality up to about 8 months of age, after which a gradual loss can be noted, probably due to a normal gereologic process."

The magnetic properties of core materials ae investigated for a pulse width of 30 nanoseconds. Methods of testing which are necessitated by the sort pulse width are explained and the design of the pulser which is capable of 0.2 megawatt peak power is described. The data obtained if evaluated and presented for the various materials which were tested.

Aid in redesign of the calibration facility in order to: 1. Reduce the rate of exposure for calibration personnel below 1 mr/hr; 2. Reduce the rate of exposure outside of the 3745 Building; 3. Reduce the risk of breaking radium sources; 4. Improve the efficiency of calibration procedures by: a. Allowing calibration to be done faster; b. Providing several calibration ranges which can operate simultaneously in the present space allowed; c. Allowing instrument survey work to proceed while calibration work is done. A well-type calibration installation is proposed and a brief description of the required shielding is included.

The leaching behavior, thickening and filtering characteristics and recovery of uranium from high grade uranium ore from Rum Jungle, Northern Territory, Australia are described.