Development of acceptable risk criteria for nuclear waste management requires the translation of publicly determined goals and objectives into definitive issues which, in turn, require resolution. Since these issues are largely of a subjective nature, they cannot be resolved by technological methods. Development of acceptable risk criteria might best be accomplished by application of a systematic methodology for the optimal implementation of subjective values. Multi-attribute decision analysis is well suited for this purpose.

From 9 January through 20 January 1978, Honeywell conducted a wind tunnel test on a 1/30 scale partial heliostat field. The heliostats were per Honeywell's design developed under the 10 megawatt central receiver pilot electrical power plant subsystem research experiment contract. Likewise, the scaled section of the field geometry duplicated the proposed circular layout. Testing was conducted at the Georgia Institute of Technology's 9 foot subsonic tunnel. The objective of the test was to ascertain from a qualitative standpoint the field effects upon wind loading within a heliostat field. To accomplish this, numerous pressure tap measurements at different heights and at different field positions were taken with varying wind speeds, fence designs, and heliostat gimbal orientations. The Department of Energy specified boundary layer profile was also scaled by 1/30 in order to simulate the total wind effects as accurately as possible taking into account the potentially severe scaling or Reynolds number effects at a 1/30 scale. After initial model set-up within the tunnel and scaled boundary layer generated, 91 separate runs were accomplished. The results do demonstrate the high sensitivity of wind loading upon the collector field due to the actual heliostat orientation and fence geometry. Vertical pressure gradients within …

The activities and results of the chalcopyrite materials synthesis effort are described. Deposition of ZnSiAs/sub 2/ on 100 Ge and 111 Si substrates was continued with emphasis on identifying correlations between growth system settings and layer properties such as morphology, uniformity, growth rate, stoichiometry, and crystal structure. Results are discussed.

Research was directed towards the synthesis and characterization of the n-type deposits. The conditions required for growth of the n-type layers were found and the emphasis was then returned to the problem of obtaining thicker layers of p-ZnSiAs/sub 2/ via higher growth rates. The conditions required for consistent epitaxial growth were also pursued. Results are presented.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Dues checkoffs by employees of Tarrant County Hospital District.

This TSTF proposal has two principal objectives. The first objective is to provide by mid-FY 1981 a demonstration of the fuel cycle and tritium containment systems which could be used in a Tokamak Experimental Power Reactor for operation in the mid-1980's. The second objective is to provide a capability for further optimization of tritium fuel cycle and environmental control systems beyond that which is required for the EPR. The scale and flow rates in TSTF are close to those which have been projected for a prototype experimental power reactor (PEPR/ITR) and will permit reliable extrapolation to the conditions found in an EPR. The fuel concentrations will be the same as in an EPR. Demonstrations of individual components of the deuterium-tritium fuel cycle and of monitoring, accountability and containment systems and of a maintenance methodology will be achieved at various times in the FY 1979-80 time span. Subsequent to the individual component demonstrations--which will proceed from tests with hydrogen (and/or deuterium) through tracer levels of tritium to full operational concentrations--a complete test and demonstration of the integrated fuel processing and tritium containment facility will be performed. This will occur near the middle of FY 1981. Two options were considered for the …

This report consists of discussion of constitutional issues.

A series of ten slicing demonstrations on a multi-wire slurry saw, manufactured by Yasunaga Engineering Company of Japan and distributed by GEOS Corporation of Stamford, Connecticut, was made to evaluate the silicon ingot wafering capabilities. The results revealed that the present sawing capabilities can provide usable wafer area from an ingot 1.05 m/sup 2//kg (e.g., kerf width 0.135 mm and wafer thickness 0.265 mm). Satisfactory surface qualities and excellent yield of silicon wafers were found. One drawback is that the add-on cost of producing wafer from this saw, as presently used, is considerably higher than the systems being developed by Varian and Crystal Systems for the Low-Cost Silicon Solar Array Protect (LSSA), Task II, primarily because the Yasunaga saw uses a large quantity of wire. The add-on cost can be significantly reduced by extending the wire life and/or by reuse of properly plated wire to restore the diameter.