Recently revised estimates of target gain have added additional optimistic inputs to the interface between targets, accelerators and fusion chamber beam transport. But it remains valid that neutralization of the beams in the fusion chamber is useful if ion charge state Z > 1 or if > 1 kA per beamlet is to be propagated. Some engineering and economic considerations favor higher currents.

Concepts of the range of investigation of a borehole gravimeter are reviewed. It is shown that the maximum sensitivity to a mass point at a horizontal distance R from a borehole occurs at a vertical distance Z = R/..sqrt..2. Thus, the angle of maximum sensitivity is about 55/sup 0/ from the vertical. It is also shown that the absolute value of the gravitational effect decreases with increasing R. There are two maxima of the vertical gradient of gravity (at Z = 0 and at Z = ..sqrt../sup 3///sub 2/ R). The minimum distance required between gravimeter stations to obtain a usable measurement can be determined. The slab radius R for which the gravitational effect of a horizontal slab is equal to 45%, 90%, etc., of that of an infinite horizontal slab is a function of the measurement spacing. The closer the measurement spacing, the more information obtained.

For heavy-ion fusion energy applications, Mark and Yu have derived hydrodynamic models for numerical simulation of energetic pinched-beams including self-pinches and external-current pinches. These pinched-beams are applicable to beam propagation in fusion chambers and to the US High Temperature Experiment. The closure of the Mark-Yu model is obtained with adiabatic assumptions mathematically analogous to those of Chew, Goldberger, and Low for MHD. Features of this hydrodynamic beam model are compared with a kinetic treatment.

The principal aim of the National Waste Terminal Storage (NWTS) program is to develop repositories in several different rock formations in various parts of the country. Rocks such as salt, shale, limestone, and granite may qualify as host media for the disposition of radioactive wastes in the proper environments. In general, the only requirement for any rock formation or storage area is that it be able to contain any emplaced wastes for so long as it takes for the radioactive materials to decay to innocuous levels. This requirement, though, is a formidable one because some of the wastes will remain active for periods of hundreds of thousands of years and because the physical and chemical properties of rocks that govern circulating ground water and, hence, the containment may be difficult to determine and define. Rock salt has long been regarded as the most favored geologic medium for the containment of radioactive wastes in the United States. This stems largely from the plastic behavior of salt, which promotes self-healing and otherwise makes it impermeable to circulating ground water. Other important advantages of salt include its wide distribution, ease of mining, and favorable heat dissipation characteristics. In addition to the salt domes …

Algebraic multigrid (AMG) is an attractive choice for solving large linear systems {Lambda}x = b on unstructured grids. While AMG is applicable as a solver for a variety of problems, its robustness may be enhanced by using it as a preconditioner for Krylov solvers, such as GMRES. The sheer size of modern problems, hundreds of millions or billions of unknowns, dictates the use of massively parallel computers. AMG consists of two phases: the setup phase, in which smaller and smaller linear systems are generated by means of linear transfer operators (interpolation and restriction); and the solve phase, which employs a smoothing operator, such as Gauss-Seidel or Jacobi relaxation. Most of these components can be parallelized in a straightforward fashion; however, the coarse-grid selection, in which the grid for a smaller linear system is created on which the error can be approximated, is highly sequential. It is important to develop parallel coarsening techniques. They briefly present here the coarsening algorithms used in the parallel AMG code ''Boomer AMG'' and summarize some performance results for those algorithms. A detailed discussion of the algorithms and numerical results will be found.

Dimensional changes in PBX materials resulting from temperature change are of interest to engineers, designers and modelers. In this paper we present data from recent measurements made on LX17-1, as well as on the material's binder and its energetic constituent. LX17-1 is made from 7.5% KEL-F 800 binder combined with 92.5% wet aminated TATB energetic crystals. Due apparently to the anisotropic expansionary behavior of the TATB, the material exhibits irreversible growth, in addition to the usual reversible expansions and contractions associated with temperature change. In an effort understand reversible and irreversible growth behavior and to verify consistency between our measurements and those made historically, measurements were performed on billet pressed LX17-1, on die pressed TATB, and on KEL-F alone. It is important to realize that, for materials involving TATB, expansionary behavior results from the combined effects of reversible and irreversible (ratchet growth) phenomena.

With the advent of fast computer systems, Scientists are now able to generate terabytes of simulation data. Unfortunately, the shear size of these data sets has made efficient exploration of them impossible. To aid scientists in gathering knowledge from their simulation data, we have developed an ad-hoc query infrastructure. Our system, called AQSim (short for Ad-hoc Queries for Simulation) reduces the data storage requirements and access times in two stages. First, it creates and stores mathematical and statistical models of the data. Second, it evaluates queries on the models of the data instead of on the entire data set. In this paper, we present two simple but highly effective statistical modeling techniques for simulation data. Our first modeling technique computes the true mean of systematic partitions of the data. It makes no assumptions about the distribution of the data and uses a variant of the root mean square error to evaluate a model. In our second statistical modeling technique, we use the Andersen-Darling goodness-of-fit method on systematic partitions of the data. This second method evaluates a model by how well it passes the normality test on the data. Both of our statistical models summarize the data so as to answer …

None

WARPrz is a 2.5 dimensional, cylindrically symmetric, electrostatic, particle-in-cell code. It is part of the WARP family of codes which has been developed to study heavy ion fusion driver issues. WARPrz is being used to study the longitudinal dynamics of heavy ion beams including a longitudinal instability that is driven by the impedance of the LINAC accelerating modules. This instability is of concern because it can enhance longitudinal momentum spread; chromatic abhoration in the lens system restricts the amount of momentum spread allowed in the beam in the final focusing system. The impedance of the modules is modeled by a continuum of resistors and capacitors in parallel in WARPrz. We discuss simulations of this instability including the effect of finite temperature and reflection of perturbations off the beam ends. We also discuss intermittency of axial confining fields (``ears`` fields) as a seed for this instability.

Deep Space Program Science Experiment (DSPSE), also known as Clementine, is a collection of science experiments conducted in near-earth with the goal of demonstrating Strategic Defense Initiative Office (SDIO) developed technologies. The 785 lb (fully fueled) spacecraft will be launched into low Earth orbit in February 1994 together with a Star 37 solid kick motor and interstage. After orbit circulation using Clementine`s 110 lb Delta-V thruster, the Star 37 will execute a trans-lunar injection burn that will send the spacecraft toward lunar obit. The 110-lb will then be used in a sequence of burns to insert Clementine into a trimmed, polar orbit around the moon. After a two month moon mapping mission, Clementine will execute burns to leave lunar orbit, sling-shot around Earth, and flyby the moon on a 9.4 million km journey toward the asteroid Geographos. After about three months in transit, Clementine will attempt a flyby with a closest point of approach of 100 km from the asteroid on August 31, 1994. During its approach to Geographos, Clementine will be tracked by the Deep Space Network (DSN) and receive guidance updates. The last update and correction burn will occur about one day out of the flyby. Multiple experiments …

The beams in a Heavy Ion beam driven inertial Fusion (HIF) accelerator must be focused onto small spots at the fusion target, and so preservation of beam quality is crucial. The nonlinear self-fields of these space-charge-dominated beams can lead to emittance growth; thus a self-consistent field description is necessary. We have developed a multi-dimensional discrete-particle simulation code, WARP, and are using it to study the behavior of HIF beams. The code`s 3d package combines features of an accelerator code and a particle-in-cell plasma simulation, and can efficiently track beams through many lattice elements and around bends. We have used the code to understand the physics of aggressive drift-compression in the MBE-4 experiment at Lawrence Berkeley Laboratory (LBL). We have applied it to LBL`s planned ILSE experiments, to various ``recirculator`` configurations, and to the study of equilibria and equilibration processes. Applications of the 3d package to ESQ injectors, and of the r, z package to longitudinal stability in driver beams, are discussed in related papers.

A new algorithm for space charge emission has been developed to provide the correct (to a few percent) Child-Langmuir steady-state current limits as the number of mesh points in the voltage gap drops to O(10). Further, the transient behavior of such flows compares well with idealized, analytic cases, lending confidence as we extend these algorithms into full RZ geometry with curved emitting surfaces to investigate transient characteristics of realistic injector designs.

The feasibility of using the products of free-radical copolymerization of modified organosiloxane in the formation of a thermally stable and chemically resistant polymer concrete for use in geothermal environments has been demonstrated. Specimens have been produced using mixtures of organosiloxane containing pendant vinyl groups and styrene or different silicon fluids as a comonomer in conjunction with a free-radical initiator and several aggregate materials. The use of these monomers in conjunction with materials such as SiO/sub 2/ and portland cement to form polymer concrete results in composites with high compressive strength (80 to 100 MPa) and thermal and hydrolytic stability. The results from studies to determine the effect of variables such as sand-particle size, type of cement, and sand-cement ratio are discussed.

Lawrence Livermore Laboratory has been engaged in the design of tandem or multistage shaped charges for several years. Analytical and experimental work that focuses on how several aspects of tandem designs affect the jet characteristics is described. The work demonstrates the effectiveness of analytical methodology to specify liner geometries to achieve jets with controlled velocity gradients and high overall efficiency. It also shows that jet clippers and other ancillary components, along with controlled liner thickness, help make clean breaks between the jet and the slug and facilitate insertion of a second jet. Second-stage initiation and interjet time delays are discussed.

A detailed plasma spectroscopy postprocessor for H-, He-, and Li-like ions with 6 {le} Z {le} 26 has been constructed. The structure of the code and the physics contained within it will be described and a sample application given. 15 refs., 5 figs.

The effects of the longitudinal wall impedance instability in a heavy ion beam are of great interest for heavy ion fusion drivers. We are studying this instability using the R-Z thread of the WARP PIC code. We describe the code and our model of the impedance due to the accelerating modules of the induction LINAC as a resistive wall. We present computer simulations which illustrate this instability. 2 refs., 2 figs., 1 tab.

The initial portion of the task described deals with a definition of the state-of-the-art of seismic qualification methods for subsystems. Too facilitate treatment of this broad class of subsystems, three classifications have been identified: multiply supported subsystems (e.g., piping systems); mechanical components (e.g., valves, pumps, control rod drives, hydraulic systems, etc.); and electrical components (e.g., electrical control panels). Descriptions of the available analysis and/or testing techniques for the above classifications are sought. The results of this assessment will be applied to the development of structural subsystem transfer functions.

This paper reviews research in the United States and Japan on structural materials for high-field superconducting magnets. Superconducting magnets are used for magnetic fusion energy devices and for accelerators that are used in particle-physics research. The cryogenic structural materials that we review are used for magnet cases and support structures. We expect increased materials requirements in the future.

Development of acceptable risk criteria for nuclear waste management requires the translation of publicly determined goals and objectives into definitive issues which, in turn, require resolution. Since these issues are largely of a subjective nature, they cannot be resolved by technological methods. Development of acceptable risk criteria might best be accomplished by application of a systematic methodology for the optimal implementation of subjective values. Multi-attribute decision analysis is well suited for this purpose.

The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs.

None

We study the universality of the transverse momentum dependent parton distributions at small-x, by comparing the initial/final state interaction effects in dijet-correlation in pA collisions with that in deep inelastic lepton nucleus scattering. We demonstrate the non-universality by an explicit calculation in a particular model where the multiple gauge boson exchange contributions are summed up to all orders. We furthercomment on the implications of our results on the theoretical interpretation of di-hadron correlation in dA collisions in terms of the saturation phenomena in deep inelastic lepton nucleus scattering.

CgWind is a high-fidelity large eddy simulation (LES) tool designed to meet the modeling needs of wind turbine and wind park engineers. This tool combines several advanced computational technologies in order to model accurately the complex and dynamic nature of wind energy applications. The composite grid approach provides high-quality structured grids for the efficient implementation of high-order accurate discretizations of the incompressible Navier-Stokes equations. Composite grids also provide a natural mechanism for modeling bodies in relative motion and complex geometry. Advanced algorithms such as matrix-free multigrid, compact discretizations and approximate factorization will allow CgWind to perform highly resolved calculations efficiently on a wide class of computing resources. Also in development are nonlinear LES subgrid-scale models required to simulate the many interacting scales present in large wind turbine applications. This paper outlines our approach, the current status of CgWind and future development plans.

The synthesis, crystal structure, solution stability and photophysical properties of an aryl group bridging two 1-hydroxypyridin-2-one units complexed to Eu(III) are reported. The results show that this backbone unit increases the rigidity of the ensuing complex, and also the conjugation of the ligand. As a result of the latter, the singlet absorption energy is decreased, along with the energy of the lowest excited triplet state. The resulting efficiency of sensitization for the Eu(III) ion is influenced by these phenomena, yielding an overall quantum yield of 6.2% in aqueous solution. The kinetic parameters arising from the luminescence data reveal an enhanced non-radiative decay rate for this compound when compared to previously reported aliphatic bridges.