Three different methods are discussed for computing the sensitivity of the temperature field to changes in material properties and initial-boundary condition parameters for heat conduction problems. The most general method is to derive sensitivity equations by differentiating the energy equation with respect to the parameter of interest and numerically solving the resulting sensitivity equations. An example problem in which there are twelve parameters of interest is presented and the resulting sensitivity equations are derived. Numerical results are presented for thermal conductivity and volumetric heat capacity sensitivity coefficients for heat conduction in a 2-D orthotropic body. The numerical results are compared with the analytical solution to demonstrate that the numerical method is second order accurate as the mesh is refined spatially.

The Meyerhoff Scholarship Program was created at UMBC in 1988 with a grant of $522,000 from the Robert and Jane Meyerhoff Foundation. Mr. Meyerhoff was particularly interested in addressing the shortage of African Americans, especially black males, who successfully pursue careers in science and engineering. The initial grant enabled UMBC to launch a program of full support for outstanding African American students, competitively selected from across Maryland, who would major in mathematics, science, engineering, or computer science, and then pursue Ph.D.s in these areas. The first group of Meyerhoff Scholars included 19 young men who enrolled in Fall 1989. Now in its seventh year, the Program has a total enrollment of 180 (95 male, 85 female), including 47 new Meyerhoff freshmen in Fall 1995 (average SAT scores of 1226) and 10 students from outside Maryland (New York, California, Indiana, Ohio, and Pennsylvania). The National Science Foundation has indicated the UMBC has one of the largest concentrations of high achieving African American students in science anywhere in the US.

Three tools were developed towards design of an ambient temperature radiometric instrument, namely the CZT Probe--a cadmium zinc telluride based gamma and x ray detector probe, the MicroNOMAD--a low power, portable multichannel analyzed, and CZTU--spectral analysis software that provides uranium enrichment analysis. The combination of these three tools with an optimal sodium iodide (NaI) detector provides the ability to search for and then analyze uranium as well as other radionuclides in the field. Several national and international organizations including the International Atomic Energy Agency, the European Communities Safeguards Directorate, US Customs, and US DOE have expressed interest and are currently evaluating these systems.

This report covers the evaluation of the structural design of the two stainless steel containment vessels in CROFT SAFKEG Model Number 2863B, for conformance to the design criteria of the NRC Regulatory Guide 7.6, NRC Regulatory Guide 7.8, and the applicable requirements of the ASME Boiler and Pressure Vessel Code, Section 3, and Section 8. The two containment vessels are designated Cans 2870 and 2871. Each of these containment vessels was analyzed for the loadings specified in chapter 2, Section 2.1.2 of the SARP. Structural assessment of Cans 2870 and 2871 due to loading considerations beyond the evaluation of pressure and temperature are presented. This report is organized as follows: (1) overview of the design of each containment vessel and pressure boundary; (2) brief description of both containment vessels; (3) discussion of normal and accident conditions; (4) analysis assumptions; (5) detailed structural evaluation of each component of each containment vessel; (6) demonstration of compliance to Regulatory Guide 7.6 stress evaluations; (7) demonstration of compliance to Regulatory Guide 7.8 loading combinations; and (8) summary of the calculated stresses, comparison with design allowables, estimates of margins of safety and a summary of results and conclusions.

A swept-frequency ultrasonic interferometry technique is used for noninvasively determining acoustic properties of fluids inside containers. Measurements over a frequency range 1-15 MHz on six liquid chemicals are presented. Measurements were made with the liquid inside standard rectangular optical glass cells and stainless steel cylindrical shells. A theoretical model based on one-dimensional planar acoustic wave propagation through multi-layered media is employed for the interpretation of the observed resonance (interference) spectrum. Two analytical methods, derived from the transmission model are used for determination of sound speed, sound attenuation coefficient, and density of liquids from the relative amplitude and half-power peak width of the observed resonance peaks. Effects of the container material and geometrical properties, path-length, wall thickness are also studied. This study shows that the interferometry technique and the experimental method developed are capable of accurate determination of sound speed, sound attenuation, and density in fluids completely noninvasively. It is a capable and versatile fluid characterization technique and has many potential NDE applications.

Potential applications of mid-infrared (MIR) spectroscopy in the forest products industry include on-line analysis of feedstock and web materials; these applications differ dramatically in purpose, speed, and overall chemical heterogeneity. Characterization of feedstock will enable sorting of the stock and/or wet chemistry adjustment prior to the web stage of paper production. Sorting will require imaging of the stock as well as classification of the wide variety of chemistry found in recycled stock. At the opposite end of the manufacturing process, on-line analysis of the web will enable adjustment of machine parameters to maximize product quality and minimize waste. Spectroscopic requirements for web analysis include high-speed capability and measurement precision. If successful, both applications could result in a reduction of resource waste, a reduction of plant pollution, and a reduction of energy use while simultaneously improving product quality. Here the progress towards feedstock and web analysis with MIR spectroscopy is presented. To date, work has progressed in three main areas: Diffuse Reflectance mid-Infrared Fourier Transform (DRIFT) spectroscopy of cellulose-based materials, chemometrics analysis, and research of MIR instrumentation for prototype development. The DRIFT spectroscopy data represents a database of the chemistries and spectroscopic signatures of interest to the applications discussed here. Over …

The main purpose of this report is to document observations and data on thermally coupled processes for conditions that are expected to occur within and around a repository at Yucca Mountain. Some attempt is made to summarize values of properties (e.g., thermal properties, hydrologic properties) that can be measured in the laboratory on intact samples of the rock matrix. Variation of these properties with temperature, or with conditions likely to be encountered at elevated temperature in the host rock, is of particular interest. However, the main emphasis of this report is on direct observation of thermally coupled processes at various scales. Direct phenomenological observations are vitally important in developing and testing conceptual models. If the mathematical implementation of a conceptual model predicts a consequence that is not observed, either (1) the parameters or the boundary conditions used in the calculation are incorrect or (2) the conceptual basis of the model does not fit the experiment; in either case, the model must be revised. For example, the effective continuum model that has been used in thermohydrology studies combines matrix and fracture flow in a way that is equivalent to an assumption that water is imbibed instantaneously from fractures into adjacent, partially …

The objective of this project is to address waterflood problems of the type found in Morrow sandstone reservoirs in southwestern Kansas and in Cherokee Group reservoirs in southeastern Kansas. Two demonstration sites operated by different independent oil operators are involved in this project. The Stewart Field is located in Finney County, Kansas and is operated by North American Resources Company. The Nelson Lease is located in Allen County, Kansas, in the N.E. Savonburg Field and is operated by James E. Russell Petroleum, Inc. General topics to be addressed are 1) reservoir management and performance evaluation, 2) waterflood optimization, and 3) the demonstration of recovery processes involving off-the-shelf technologies which can be used to enhance waterflood recovery, increase reserves, and reduce the abandonment rate of these reservoir types. In the Stewart Project, the reservoir management portion of the project conducted during Budget Period 1 involved performance evaluation. This included 1) reservoir characterization and the development of a reservoir database, 2) volumetric analysis to evaluate production performance, 3) reservoir modeling, 4) laboratory work, 5) identification of operational problems, 6) identification of unrecovered mobile oil and estimation of recovery factors, and 7) identification of the most efficient and economical recovery process. To accomplish …

The MINOS long-baseline experiment will search for neutrino oscillations by measuring an intense {nu}{sub {mu}} beam at the end of a 730 km flight path. The 10,000 ton MINOS far detector will utilize magnetized steel plates interleaved with track chambers to reconstruct event topologies and to measure the energies of the muons, hadrons and electromagnetic showers produced by neutrino interactions. The experiment is designed to detect {nu}{sub {mu}} {r_arrow} {nu}{sub {tau}} and {nu}{sub {mu}} {r_arrow} {nu}{sub e} oscillations with {Delta}m{sup 2} {ge} 0.001 eV{sup 2} and sin{sup 2}(2{theta}) {ge} 0.01. Any oscillation signal observed can be verified and studied by several independent tests: a near/far rate comparison, the NC/CC event ratio, the CC and NC event energy spectra, and the identification of electrons and {tau} leptons. The neutrino beam can be operated in both wide-band and narrow-band configurations, allowing the detailed study oscillation phenomena. The experiment is scheduled to begin operation in 2001.

'The author reports the preliminary results of the experiments on the dissolution behavior of vitreous silica (v-SiO{sub 2}) into aqueous solutions of variable pH and ionic strength. The experiments are being conducted in mixed flow reactors with a high circulation rate that simulates constant-stirred conditions, the efficacy of which the authors discuss below. The preliminary results indicate that v-SiO{sub 2} dissolves into aqueous solutions approximately two orders of magnitude more quickly than crystalline silica (e.g., quartz). With additional experiments, they will utilize the dissolution rate data as a framework for understanding the behavior of waste glass compositions in the subsurface. In other work related to the studies of glass reactivity, the author has written one book chapter that will be published as part of a proceedings for the CEA/VALRHO international nuclear waste disposal conference held in Mejannes le Clap, France. In separate work, she is presently writing a second book chapter for the volume entitled Adsorption on Silica Surfaces.'

I present results from a next-to-leading order event generator of purely gluonic jet production. This calculation is the first step in the construction of a full next-to-leading order calculation of three jet production at hadron colliders. Several jet algorithms commonly used in experiments are implemented and their numerical stability is investigated. A numerical instability is found in the iterative cone algorithm which makes it inappropriate for use in fixed order calculations beyond leading order.

One major function of the Tank Waste Remediation System (TWRS) is to characterize wastes in support of waste management and disposal activities at the Hanford Site. Analytical data from sampling and analysis, along with other available information, are compiled and maintained in a tank characterization report (TCR). This report and its appendixes serve as the TCR for single-shell tank 241-U-106. The objectives of this report are: (1) to use characterization data in response to technical issues associated with tank 241-U-106 waste, and (2) to provide a standard characterization of this waste in terms of a best-basis inventory estimate. Section 2.0 of this report summarizes the response to technical issues, Section 3.0 shows the best-basis inventory estimate, and Section 4.0 makes recommendations regarding safety status and additional sampling. The appendixes contain supporting data and information. This report also supports the requirements of the Hanford Federal Facility Agreement and Consent Order (Ikology et al. 1996), Milestone M-44-10.

The thermal decomposition of methane offers significant potential as a means of producing higher unsaturated and aromatic hydrocarbons when the extent of reaction is limited. Work in the literature previous to this project had shown that cooling the product and reacting gases as the reaction proceeds would significantly reduce or eliminate the formation of solid carbon or heavier (Clo+) materials. This project studied the effect and optimization of the quenching process as a means of increasing the amount of value added products during the pyrolysis of methane. A reactor was designed to rapidly quench the free-radical combustion reaction so as to maximize the yield of aromatics. The use of free-radical generators and catalysts were studied as a means of lowering the reaction temperature. A lower reaction temperature would have the benefits of more rapid quenching as well as a more feasible commercial process due to savings realized in energy and material of construction costs. It was the goal of the project to identify promising routes from methane to higher hydrocarbons based on the pyrolysis of methane.

The purpose of the WRAP Manipulator System Acceptance Test Plan (ATP) is to verify that the 4 glovebox sets of WRAP manipulator components, including rail/carriage, slave arm, master controller and auxiliary equipment, meets the requirements of the functional segments of 14590 specification. The demonstration of performance elements of the ATP are performed as a part of the Assembly specifications. Manipulator integration is integrated in the performance testing of the gloveboxes. Each requirement of the Assembly specification will be carried out in conjunction with glovebox performance tests.

'The objective of the three-year research project is to investigate the effect of adsorbed organics on the dielectric and nuclear magnetic resonance (NMR) response of porous geological materials. This will allow us to assess the use of dielectric and NMR measurements at a site to determine whether organic contaminants are present in the central volume of the pore space (in a water-wet system) or are adsorbed to the solid surface. In addition, the authors propose to use laboratory dielectric and NMR measurements to study the kinetics of the adsorption and desorption of organics by conducting experiments where the authors control temperature and vary fluid chemistry. This project can be divided into three parts: sample preparation, NMR studies, dielectric studies. Over the past nine months the authors have made significant progress in sample preparation and NMR studies. As the plan is to conduct the NMR and dielectric measurements on the same set of samples, the authors delayed the start of the dielectric measurements until the first stage of NMR measurements were complete. Below the authors summarize the progress in sample preparation and NMR measurements, first briefly introducing the method used for the NMR measurements.'

In September 1994 the DOE Richland Operations Office (RL) approved the FY 1995 multi-year baseline that included a cost estimate of $1.9 billion for FY 1996. However, Congress only appropriated $1.3 billion for that year. The shortfall of $600 million resulted in a significant challenge to accomplish the required workscope. Therefore, RL initiated an aggressive cost savings program to eliminate the shortfall by deleting workscope that was unnecessary and performing the remaining workscope more efficiently. RL initiated baseline planning actions (including deletions, deferrals, transfers, and additions) during the FY 1996 multi-year baseline development process to match workscope and anticipated funding and identified $205 million of workscope deletions. CFR (Contract Finance and Review Division) then reviewed over 200 cost baseline change requests during FY 1996 and documented an additional $95 million of FY 1996 cost savings. This included $73 million of workscope deletions and $22 million of efficiencies. Total savings as a result of FY 1996 initiatives, including baseline planning actions and current year initiatives, were $300 million. This report contains tables which enumerate the savings realized within each program at Hanford.

In March 1995, the Department awarded a cost-plus-award-fee contract to DynCorp valued at approximately $246 million over 5 years for ADP support services at Headquarters. The performance period for the contract was a 3-year base period with two 1-year options. The contract statement of work identified 24 information management functional areas that required technical support services, including Automated Office Systems Support and Local Area Network support. The purpose of the audit was to evaluate the cost-plus-award-fee contract for ADP support services at Headquarters. The objective was to determine whether the Department`s program offices at Headquarters were managing their ADP support services contract costs.

The objectives of this research were to: (1) examine empirically the aerosol effect on Umkehr ozone profiles using SAGE II aerosol and ozone data; (2) examine theoretically the aerosol effect on Umkehr ozone profiles; (3) examine the differences between SAGE II ozone profiles and both old- and new-format Umkehr ozone profiles for ozone-trend information; (4) reexamine SAGE I-Umkehr ozone differences with the most recent version of SAGE I data; and (5) contribute to the SAGE II science team.

The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about {pi}{sup o}`s and {eta}`s formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer.

This report examines the capital cost associated with various energy storage systems that have been installed for electric utility application. The storage systems considered in this study are Battery Energy Storage (BES), Superconducting Magnetic Energy Storage (SMES) and Flywheel Energy Storage (FES). The report also projects the cost reductions that may be anticipated as these technologies come down the learning curve. This data will serve as a base-line for comparing the cost-effectiveness of hydrogen energy storage (HES) systems in the electric utility sector. Since pumped hydro or compressed air energy storage (CAES) is not particularly suitable for distributed storage, they are not considered in this report. There are no comparable HES systems in existence in the electric utility sector. However, there are numerous studies that have assessed the current and projected cost of hydrogen energy storage system. This report uses such data to compare the cost of HES systems with that of other storage systems in order to draw some conclusions as to the applications and the cost-effectiveness of hydrogen as a electricity storage alternative.

This final report describes the results of performance tests at six full-scale wet lime- and limestone-reagent flue gas desulfurization (FGD) systems. The objective of these tests was to evaluate the effectiveness of low capital cost sulfur dioxide (SO{sub 2}) removal upgrades for existing FGD systems as an option for complying with the provisions of the Clean Air Act Amendments of 1990. The upgrade options tested at the limestone-reagent systems included the use of organic acid additives (dibasic acid (DBA) and/or sodium formate) as well as increased reagent ratio (higher excess limestone levels in the recirculating slurry solids) and absorber liquid-to-gas ratio. One system also tested operating at higher flue gas velocities to allow the existing FGD system to treat flue gas from an adjacent, unscrubbed unit. Upgrade options for the one lime-based system tested included increased absorber venturi pressure drop and increased sulfite concentration in the recirculating slurry liquor.

This document is the final laboratory report for Tank 241-T-110. Push mode core segments were removed from risers 2 and 6 between January 29, 1997, and February 7, 1997. Segments were received and extruded at 222-S Laboratory. Analyses were performed in accordance with Tank 241-T-110 Push Mode Core Sampling and analysis Plan (TSAP) and Safety Screening Data Quality Objective (DQO). None of the subsamples submitted for total alpha activity (AT) or differential scanning calorimetry (DSC) analyses exceeded the notification limits stated in DQO.

The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide- (CO{sub 2}-) flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals.

The Lawrence Livermore National Laboratory (LLNL) CTBT R{ampersand}D program has made significant progress assembling a comprehensive seismic database (DB) for events and derived parameters in the Middle East and North Africa (ME/NA). The LLNL research DB provides not only a coherent framework in which store and organize large volumes of collected seismic waveforms and associated event parameter information but also provides an efficient data processing/research environment. The DB is designed to be flexible and extensible in order to accommodate the large volumes of data in diverse formats from many sources in addition to maintaining detailed quality control and metadata. Researchers can make use of the relational nature of the DB and interactive analysis tools to quickly and efficiently process large volumes of data. Seismic waveforms have been systematically collected form a wide range of local and regional networks using numerous earthquake bulletins and converted a common format based on CSS3.O while undergoing quality control and corrections of errors. By combining traveltime observations, event characterization studies, and regional wave-propagation studies of the LLNL CTBT team, we are assembling a library of ground truth information and event location correction surfaces required to support the ME/NA regionalization program. Corrections and parameters distilled from …