The 12 papers included were entered into the data base separately. (WHK)

On February 14 and 15, 1978, a workshop on solar power development and thermal and thermochemical energy storage technology was held at Golden, Colorado. These proceedings contain the record of this workshop. They are divided into two volumes. Volume I presents an analysis and condensation of information discussed in round-table plenary sessions.

The solar steam system for the Lone Star Brewery is described in detail. It consists of a roof-mounted parabolic trough collector field heating Monsanto's Therminol T-55 heat transfer fluid, a solar-fired boiler, a heat transfer fluid circulation pump, and all the associated piping. The comparison of various collectors and heat transfer fluids surveyed is reviewed. Also included are discussions of the system performance analysis, economic analysis, safety analysis, data collection, and environmental impact assessment. Numerous drawings illustrate the system, particularly the parallel trough collectors. (LEW)

A plan of work outlining information to assess electric generating technologies is presented. Projections are made of realistic and understandable engineering and cost assessments of nonnuclear electrical generating technologies. A computer-based method of producing such engineering and cost estimates for use by EIA's Coal and Electric Power Analysis Division is to be developed and implemented. Technologies and processes to be assessed are: all nonnuclear conventional and nonconventional (coal gasification, advanced combustion turbines, atmospheric fluidized bed combustion, fuel cells, geothermal, solar thermal and photovoltaics, biomass conversion to electricity, ocean thermal, wind, and MHD). Engineering specifications recommended for determination are listed. Compatibility of the technologies are to be assessed with EIA models: MEFS, LEAP, and NCM.

This report summarizes the mechanical, structural, and hydrodynamic design of the Intermediate-Size Inducer Pump (ISIP). The design was performed under Atomics International's DOE Base Technology Program by the Atomics International and Rocketdyne Divisions of Rockwell International. The pump was designed to utilize the FFTF prototype pump frame as a test vehicle to test the inducer, impeller, and diffuser plus necessary adapter hardware under simulated Large Scale Liquid Metal Fast Breeder Reactor service conditions. The report describes the design requirements including the purpose and objectives, and discusses those design efforts and considerations made to meet the requirements. Included in the report are appendices showing calculative methods and results. Also included are overall assembly and layout drawings plus some details used as illustrations for discussion of the design results and the results of water tests performed on a model of the inducer.

Work to develop the theory controlling the electroplating of a compound semiconductor on a transparent, conductive substrate and to demonstrate operative solar cells using the approach is reported. The current program is divided essentially into three paralleled team efforts. The first effort centers on refining the electroplating process at Monosolar so thicker and more uniform layers of p- or n-type cadmium telluride can be plated on both In/sub 2/O/sub 3/:Sn- and Ni- coated substrates. 1 ..mu..M thick polycrystalline films have been achieved for the first time ever without peeling problems, a thickness optimum for maximum solar absorption and economy of materials. Second, work is underway at UCLA to physically and electrically characterize the films and diodes made from them. Under proper conditions Schottky diodes with better than 10/sup 4/ rectification ratios at 1.5 V were obtained along with preliminary indications of grain sizes up to 1 ..mu..M. Measurements of these diodes revealed the presence of deep trapping level(s) that may be associated with plating process impurities that since may have been eliminated. Third, work so far on developing improved techniques for depositing ITO has been successful at UCLA in their effort to eliminate persistent problems with ITO obtained from outside …

An analysis was performed investigating the potential of retrofitting Detroit Edison's Conners Creek power plant to supply district heating and cooling to an area surrounding the plant and within the City of Detroit. A detailed analysis was made of the types and ages of the buildings in the service area as a basis for establishing loads. The analysis of the power plant established possible modifications to the turbines to serve the load in the area. Based upon the service area data and plant retrofit schemes, a distribution system was developed incrementally over a 20-y period. An economic analysis of the system was performed to provide cash flows and payback periods for a variety of energy costs, system costs, and escalation rates to determine the economic viability of the system analyzed. The legal and regulatory requirements required of the district heating and cooling system owner in Michigan were also analyzed to determine what conditions must be met to own and operate the system.

These appendices to the Near Term Hybrid Vehicle Trade-off Studies reports present data on the SPEC-78 computer model for simulating vehicle performance, fuel economy, and exhaust emissions; propulsion system alternatives; lead-acid and sodium-sulfur batteries; and production cost estimates. (LCL)

Construction of the components of an automated solar cell layup and interconnect system is now complete. This system incorporates a Unimate 2000 B industrial robot with an end effector consisting of a vacuum pick up and induction heating coil. The robot interfaces with a smart cell preparation station which correctly orients the cell, applies solder paste and forms and positions the correct lengths of interconnect lead. The system is controlled and monitored by a TRS-80 micro computer. The entire system is presently undergoing integration prior to formal testing. A survey of elastomer manufacturers has shown transfer molded EPDM to be a strong candidate for the edge sealing material.

Following DOE's RFP for District Heating and Cooling Through Power Plant Retrofit, Detroit Edison and the City of Detroit decided to respond, even though it would mean redirection and a delay in their plan that was already under study. The analysis reported here proceeded in six steps. The first step was to identify the service area under the constraint that it be within the City of Detroit and in close proximity to the candidate plant. With the basic service area to be considered established, the load within the service area was defined for the five categories of end-users chosen: general residential, major residential, commercial, institutional, and industrial. Parallel to all tasks and continuing throughout the phase, a definition of institutional requirements - including regulatory, legal, and licensing aspects of a district heating and cooling project - was carried out to determine the ability of Detroit Edison to own and operate such a project and to define the limitations or problems that may be encountered in the project. The capacity of the retrofitted power plant to supply heating and cooling was determined as a basis for sizing the distribution systems and for determining which end-user loads could be served. The distribution …

Efforts at the Jet Propulsion Laboratory toward the production of pure polycrystaline silicon are centered on the concept of silicon particle growth in a fluidized bed reactor (FBR) and a continuous flow pyrolyzer (CFP). The CFP possibly can provide the seed particles which will be grown to larger sizes in the FBR. In both the reactors polycrystalline silicon is obtaned from the pyrolysis of silane. A part of the JPL effort is to develop a model of silicon particle growth for the purpose of predicting particle growth rates and product particle size distributions in the FBR and the CFP. This repot describes the mathematical models of silicon particle growth in the FBR and the CFP.

The use of a biphase turbine system to recover waste heat from diesel engines was examined and found to have many favorable attributes. Among these were low rpm, high torque, low heat exchanger cost, and simplicity. Several candidate working fluid combinations were tested at temperatures of interest. The contact heat exchanger concept was substantiated by large scale experiment. The program includes subscale tests of key hardware components of a biphase turbine bottoming system. These are the two-phase nozzle, two-phase turbine, and direct contact heat exchanger. A comprehensive cost analysis was completed. A three-year program leading to a full-size system field demonstration has been planned. Progress in the first year of this program and the effort started on the second year program are reported.

From July, 1974, to December, 1979, the Laboratory for Nuclear Service (LNS) conducted a study of the feasibility of resource sharing via general - purpose computer networks. Originally, the study focused on methods of implementing an ARPAnet connection for LNS in collaboration with the MIT Information Processing Center (IPC). When it appeared that the most feasible solution for LNS was to access the ARPANET via the MIT Multics system, the investigation expanded to a consideration of the implementation of computer resource sharing via networks. Experiments were performed at various ERDA installations on the ARPANET in using the networks for offloading large calcuations and obtaining access to unique hardware and software. Performance statistics were collected and cost comparisons, made. Both the benefits and barriers of networking were analyzed. The value of electronic mail, teleconferencing, and other forms of computer-aided communication was also investigated. The study demonstrated that resource sharing via networks can provide small computer installations access to computer facilities not available on site. However, it is not adequate substitute for an on-site computer. There must be enough computing power locally to service the average load. Certain types of computations are not effectively done on the network. Use of the network …

It was found that marine algae could be converted to higher aliphatic organic acids and that these acids could be readily removed from the fermentation broth by membrane or liquid-liquid extraction. It was then proposed to convert these higher organic acids to aliphatic hydrocarbons via Kolbe electrolysis, which may be used as a diesel fuel. A coenzyme M analogue, 2-bromoethanesulfonic acid has been shown to be an effective suppressor of methane in nonsterile anaerobic fermentation of cellulosic substrates. A tapered auger device has been designed and built which has been demonstrated on the bench to be effective for adding substrate and removing residue in a continuous manner from a fixed packed bed fermenter. A solvent extracter system using kerosene as the nonaqueous phase has been constructed and is currently in operation in series with the 300 liter fixed packed bed fermenter. The electrolytic oxidation of organic acids produced in the 300 liter fixed packed bed fermenter is operating with a favorable energy balance of 6/1 based on the applied potential. As stated earlier the liquid-liquid extractor system is operating in line with the 300 liter fixed packed bed fermentor. The other components of an integrated continuous system, the continuous feed …

High power pulse copper vapor laser systems consist of a master oscillator and numerous power amplifiers. Large systems used in laser isotope separation experiments require several automatic control systems. The rapid development of compact mini computers over the past several years has enabled the implementation of sophisticated computer controlled copper vapor laser systems. Present systems provide automatic time synchronization and input power stabilization. Future systems will incorporate semi-automatic start-up capabilities.

The potential hazard to man arising from the hypothetical release of radioactive spent fuel waste into various water systems has been evaluated. Radionuclide transport and human exposure were simulated for six water systems: a large Northwestern river, a small Northeastern river, a small Northwestern river, a large Central Region river, a lake with no outflow in an arid region, and an aquifer discharging directly into an ocean.

Progress during July 1979 in the development of the TAAMM warhead is reported. The one gun test was unsuccessful due to the velocity augmentor misfiring. Analytical studies were performed to determine velocity augmentor optimization. Hardware for the optimum augmentor is being fabricated. The results of a series of shaped charge tests are reported. Some delay detonators have been obtained and will be tested. (LCL)

The impacts described here for 1985 and 1990 are based on a national energy projection which assumes medium energy demand and fuel supply through 1990 but does not incorporate the policies of the National Energy Act (NEA). This scenario, referred to as the Projection Series C or the TRENDLONG MID-MID scenario, is one of six possible energy futures developed by the DOE Energy Information Administration for the Department's 1977 Annual Report to Congress. It was chosen as representative of the official DOE national energy projections when this project was initiated, prior to the passage of the National Energy Act. Since the RIIA program is part of an ongoing review of the regional impact of energy policies, the next phase will examine the National Energy Act (NEA) and initiatives suggested by the President's second National Energy Plan. However, since coal utilization increases under the NEA, in general, impacts identified in the TRENDLONG Series C Scenario should provide a framework for the discussion of impacts by NEA. The environmental impacts discussed in this volume are for Federal Region I (Maine, Vermont, New Hampshire, Massachusetts, Rhode Island, and Connecticut). However, there are nine companion volumes, one for each of the other Federal Regions.

This document presents an implementation structure for the near-term development of performance criteria and test methods for photovoltaic (PV) materials, components, subsystems, and systems. The approach is designed to be responsive to the Photovoltaic Research, Development and Demonstration Act of 1978 (PL-95-590). The project is organized into four tasks: (1) establishment of performance criteria and the development of test methods; (2) development of laboratory accreditation/product certification guidelines; (3) development of validation methodologies; and (4) coordination of the quality assurance effort with consensus standards and code organizations. A schedule and milestones are presented for each task. The appendices provide a brief overview of standards and the standards development process. The philosophy behind this project is to develop industry- and user-established performance criteria, test methods, and accreditation procedures which may then be referred to independent consensus standards organizations for the preparation of consensus standards. The emphasis in execution of this approach will be to develop uniform, fair performance criteria and tests and to avoid rigid, prescriptive criteria. Photovoltaics is an emerging technology; criteria written now must be able to accommodate devices and techniques not yet developed.

This appendix presents tabulated data used for evaluating the feasibility of retrofitting thermal power plants in the Detroit area so as to provide heat for a district heating system. (LCL)

Thermochemical equilibrium computations for the preparation of silicon (Si) by the reaction between sodium (Na), either liquid or vapor, with silicon tetrafluoride (SiF/sub 4/) and silicon tetrachloride (SiCl/sub 4/) are presented. Computations indicate that SiF/sub 4/ reacts with either liquid or gaseous Na to produce temperatures sufficiently high to form molten Si. Liquid Na reacts with SiF/sub 4/ to produce substantially higher Si yields than does the free combustion reaction with Na vapor; however, the Na vapor/SiF/sub 4/ reaction, if temperature-constrained at the Si melting point, produces an expected Si yield close to 100%. A stoichiometric mixture of liquid Na and SiCl/sub 4/ vapor reacts to produce liquid Si, gaseous sodium chloride (NaCl), and a small concentration of Si subhalides. Gaseous Na, however, reacts with SiCl/sub 4/ to form entirely gaseous reaction products and a high yield of Si (liquid) but subhalide concentrations are greater than when liquid Na is used. The reactions of a number of impurity elements in Na, during the course of the Na-Si halide reaction, have been described. Of those considered, only calcium (Ca), magnesium (Mg), phosphorus (P), and strontium (Sr) are expected to co-exist to any extent in Na vapor and none is expected to …

A computer-assisted thermochemical equilibrium analysis was conducted for the silicon transport reaction: Si(s) + SiF/sub 4/(g) = (intermediates) = Si(s) + SiF/sub 4/(g). The calculations indicated that a substantial transport rate should be possible at temperatures of 1700/sup 0/K and one atmosphere pressure. Computations were made to determine whether the elemental impurities present in metallurgical-grade silicon would transfer in this process. It was concluded that aluminum, chromium, copper, iron, manganese, molybdenum, nickel, vanadium, and zirconium would not transfer, but that boron, magnesium, phosphorus, and titanium would transfer.

This report is the first in a series and details the results accomplished under the following tasks: (1) evaluation of existing passive solar calculation methods, (2) BLAST/DOE-1 program interface and comparison with BR-202, and (3) development of analytic relationships between the thermal balance and weighting factor techniques. The various methods available for use in thermal load analysis are presented with detailed informaton on algorithms used in the thermal balance and weighting factor techniques. (MOW)

This summary report presents a condensation of the designs as developed from requirements and concept selection to preliminary design. The study consists of the following six tasks: (1) Design requirements: establish design environmental conditions and criteria. Develop methodology to both assess SKSS reliability and performance, and minimize life cycle costs. (2) Conceptual design: develop at least two SKSS conceptual designs for both barge and spar platform (eight in all). Consider commercial plant SKSS, verify feasibility, define problem areas, estimate life cycle cost. Develop deployment, operation and maintenance scenarios. Recommend an SKSS concept for each platform. (3) Preliminary design; prepare preliminary designs for two SKSS concepts selected by NOAA/DOE. Optimize the designs, provide deployment and retrieval procedures, support requirements, evaute reliability and performance. Assess effects of watch circle and water depth variation. (4) Development and testing recommendations: recommend programs required to confirm design assumptions and performance predictions, including material and component development, and soils investigation. Estimate cost and schedule required to perform these programs. (5) Cost-time analysis: develop a detailed cost and schedule for the acquisition, transportation, deployment, inspection, maintenance, spares, replacement and salvage for the SKSS designs. (6) Commercial plant SKSS recommendations: assess applicability of designs to commercial plant SKSS. …