Experiments conducted during this past quarter demonstrated the decided difference both in amount and composition of the gas produced from the fermentation of ozonated versus unozonated yeast-plant SSL. Gas from ozonated SSL averaged over 80% methane content while unozonated effluent was mostly carbon dioxide. Gas production rates and retention time studies indicated that the fermentation was substrate-limited. Preliminary tests using supplemental carbon sources have verified this. The success of the ozonation process in producing fermentable substrates was clearly shown by the appreciable yeast growth in the ozonated SSL. Of particular significance was the maximum yield obtained at the short ozonation time of 10 minutes as compared to the 2-hour treatment. It is possible that shortening the ozonation time could also increase the amount of substrate available for methane production. This would be very important in transferring this process to a commercial basis and reducing the operating costs.

This test procedure (No. 404) provides a detailed description of the verification methods which shall be used in the development program to be conducted on the Kilowatt Isotope Power System (KIPS) Jet Condenser to fulfill the requirements of the Ground Demonstration Test Plan, Section 6.4.

Information is presented concerning the development of the SOMIX-1 computer code for sodium drop burning analysis; experimental analysis of burning sodium drops; aerosol leakage from containment buildings; high-temperature-concentration aerosols; aerosol source term from vaporized fuel; properties of high-temperature fuel mixtures; and development of the COMRADEX computer code for analysis of radiological doses in the environment from LMFBR accidents.

This report deals with some techniques in applied programming using the Livermore Timesharing System (LTSS) on the CDC 7600 computers at the National Magnetic Fusion Energy Computer Center (NMFECC) and the Lawrence Livermore Laboratory Computer Center (LLLCC or Octopus network). This report is based on a document originally written specifically about the system as it is implemented at NMFECC but has been revised to accommodate differences between LLLCC and NMFECC implementations. Topics include: maintaining programs, debugging, recovering from system crashes, and using the central processing unit, memory, and input/output devices efficiently and economically. Routines that aid in these procedures are mentioned. The companion report, UCID-17556, An LTSS Compendium, discusses the hardware and operating system and should be read before reading this report.

The number and types of cables for various experiments planned for the ISABELLE storage rings are estimated, and the results of a questionnaire on anticipated data taking rates are discussed. Necessary data acquisition rates, data storage capabilities, and data processing rates are estimated. (PMA)

Population I stars of 15 M/sub mass/ and 25 M/sub mass/ have been evolved from the zero-age main sequence through iron core collapse utilizing a numerical model that incorporates both implicit hydrodynamics and a detailed treatment of nuclear reactions. The stars end their presupernova evolution as red supergiants with photospheric radii of 3.9 x 10/sup 13/ cm and 6.7 x 10/sup 13/ cm, respectively, and density structures similar to those invoked to explain Type II supernova light curves on a strictly hydrodynamic basis. Both stars are found to form substantially neutronized ''iron'' cores of 1.56 M/sub mass/ and 1.61 M/sub mass/, and central electron abundances of 0.427 and 0.439 moles/g, respectively, during hydrostatic silicon burning. Just prior to collapse, the abundances of the elements in the 25 M/sub mass/ star (excluding the neutronized iron core) have ratios strikingly close to their solar system values over the mass range from oxygen to calcium, while the 15 M/sub mass/ star is characterized by large enhancements of Ne, Mg, and Si. It is pointed out on nucleosynthetic grounds that the mass of the neutronized core must represent a lower limit to the mass of the neutron star or black hole remnant that stars …

The inducer pump, designed and fabricated as a test article to evaluate the inducer/impeller pump concept for providing improved suction performance of large sodium pumps, met or exceeded all performance goals. The inducer stage in front of the centrifugal impeller dramatically reduces the size of pumps. It was demonstrated that the inducer can operate at suction specific speeds in excess of 35,000, whereas conventional centrifugal pumps have demonstrated capability to only 12,000. The inducer pump employs several components of the 2000 and 4000 gpm NaK pumps from the Connecticut Aircraft Nuclear Engine Laboratory (CANEL) Programs. Use of the volute, thermal barrier and shaft oil seal from the CANEL pumps allowed acceleration and cost reduction of the Inducer Pump Program.

A feasibility study has been completed to decontaminate the primary system of the Dresden-1 Nuclear Power Unit operated by Commonwealth Edison Company of Illinois. Available data initially were searched to determine the state of the art. Solvents based on organic acids and chelates gave unsatisfactory deontamination factors or unacceptable corrosion rates when evaluated for cleaning of specimens from the Dresden-1 primary system, under static and dynamic conditions. A new proprietary cleaning solution, Dow Solvent NS-1, was successfully applied in these laboratory studies.

A new, wide-range equation of state (EOS) has been constructed for Be. The composite theoretical model incorporates ionization equilibrium and condensed-matter and multiphase physics. It also satisfies all thermodynamic equilibrium constraints. The theoretical EOS has been compared with all available high-pressure and high-temperature Be data, and satisfactory agreement is generally achieved. The most interesting feature is the theoretical prediction of melting at just below 220 GPa (2 Mb), indicating an extremely wide pressure range for solid Be. A striking feature is the appearance of shell-structure effects in physical-process paths: 2 large loops appear on the principal Hugoniot and the behavior of release isentropes from rho = rho/sub 0/ is significantly affected.

Appendices are presented which contain information concerning the decontamination of Dresden-1; consultant's opinions; proceedings of the American Power Conference, Volume 37, 1975; health physics reports; toxicological properties and industrial handling hazards of Dow solvent NS-1; and expected radiation dose rates in the new Dresden station radioactive waste processing building.

Significant progress in plasma confinement and temperature has been achieved in the 2XIIB facility at Livermore. These encouraging results, and their theoretical corroboration, have provided a firm basis for the design of a new generation of magnetic mirror experiments, adding support to the mirror concept of a fusion reactor. Two new mirror experiments have been proposed to succeed the currently operating 2XIIB facility. The first of these called TMX (Tandem Mirror Experiment) has been approved and is currently under construction. TMX is designed to utilize the intrinsic positive plasma potential of two strong, and relatively small, minimum B mirror cells to enhance the confinement of a much larger, magnetically weaker, centrally-located mirror cell. The second facility, MFTF (Mirror Fusion Test Facility), is currently in preliminary design with line item approval anticipated for FY 78. MFTF is designed primarily to exploit the experimental and theoretical results derived from 2XIIB. Beyond that, MFTF will develop the technology for the transition from the present small mirror experiments to large steady-state devices such as the mirror FERF/FTR. The sheer magnitude of the plasma volume, magnetic field, neutral beam power, and vacuum pumping capacity, particularly in the case of MFTF, has placed new and exciting …

Effort during the past quarter was directed at two specific objectives. First, the conversion of the protein production experiments from batch to continuous operation and, second, the identification of growth stimulants to increase methane yield. Early in the project, yeast production ranging from 0.5 to 5.0 grams of dry yeast per liter had been obtained in batch cultures. Highest yields were consistently attained on SSL (spent sulfite liquor) which had been ozonated for only 10 minutes. Continuous fermentation studies using three hour ozonated SSL confirmed the characteristic yields demonstrated in previous batch tests. Contamination, which occurred at residence times less than two days, appeared to decrease protein production rate and yield. Vitamins and minerals, fatty acids, and low molecular weight alcohols were investigated as possible stimulants for methane production. Only the combination of alcohol plus vitamins and minerals seemed to be effective. Stimulated production failed to achieve the 25 ml per hour rate that had randomly been exceeded many times over the past six months. Additional culture studies are planned to examine the possibility that the mixed culture, now present in the anaerobic fermenters, has degenerated slowly over the past year.

Wisely managing the profound human and environmental risks of nuclear wastes requires complex moral and ethical judgments. Whereas traditional ethics is limited to interpersonal relations, a new system of ethics--bioethics--concerns man's relation with nature. Environmentalists claim that technology has upset the balance of nature, that nature is sacred and has inviolable rights, and that man must therefore regulate his behavior to conform to earth's limited carrying capacity. They also say that Judeo-Christian monotheism and anthropocentrism have sanctioned the exploitation of nature in the West, whereas Eastern religions teach adaptation to nature. Evidence suggests, however, that the balance of nature is neither absolute nor precarious, but is continually changing. Moreover, technology has brought more good than harm to man, and man's needs should supersede nature's. Other evidence indicates that the earth's resources may be neither limited nor nearly exhausted. Persuasive arguments also demonstrate that man's relation with nature is not traceable to religious assumptions. In assessing the risks/benefits of nuclear-waste management, we should avoid risks that jeopardize the rights of future generations without imposing excessive sacrifices on the present generation.

This report documents the 1) radial compliance and 2) low friction coating tests conducted on the CRBRP Rotating Plug Inflatable Seals per test plan N707TR810014. Test results show that narrowing the seal blade from 0.25 to 0.12 in. will effectively reduce dynamic drag from 30 to 20 lb/ft under nominal conditions and will increase seal radial compliance from 0.12 to 0.30 in. without an unacceptable rise in dynamic drag. Tests also demonstrated that application of a teflon coating to the seal wear surface reduced breakaway drag by 25% based on results of comparison dwells.

The purpose of this contract effort is to understand how nonfuel components of coal will affect the electron and alkali seed chemistry in a high temperature coal combustion system like that envisioned for direct fired MHD generators. Three specific problems are being considered during this contract period. The first problem area is to characterize the formation of negative ions due to electron attachment processes in the combustion flow. While some stable negative ions may be formed from hydrocarbon combustion species (OH/sup -/), the bulk of the stable negative ions are expected to be formed from oxidized inorganic coal slag constituents (BO/sup -//sub 2/, PO/sup -//sub 2/, AlO/sup -//sub 2/, etc). Negative ion formation can reduce the conductivity of the MHD plasma, particularly at the low temperature end of the MHD channel, thus decreasing the efficiency of power generation. The second problem area involves the role slag condensation may play in determining the electron density through recombination, also adversely affecting conductivity in the core flow. The competitive balance between thermionic emission from slag droplets and electron/ion recombination on the droplet surfaces may be severely tipped in favor of electron loss processes, depending on the slag properties. The third problem area is …

The effect of shock wave risetime on material ejection in aluminum has been studied for loading stresses of 21 GPa. Uniform loading was accomplished with plate impact techniques by mounting specimens on a ramp wave generator. Projectile impact on one side of the wave generator produced a wave which dispersed with propagation distance. This wave was then made incident to an aluminum specimen, so that the specimen experienced non-shock loading. It was found that mass ejection from aluminum surfaces can be reduced by over two orders of magnitude relative to shock loading conditions by accelerating the surface with a wave risetime greater than about 35 ns. These results suggest an explanation for the apparent discrepancies which are sometimes observed in mass ejection measurements utilizing either plate impact or electron beam deposition to generate stress waves.

The Laboratory for Nuclear Science (LNS) has continued its study of resource sharing via general-purpose computer networks. This report describes experiments performed with the Lawrence Berkeley Laboratory and the Argonne National Laboratory in using the network for off-loading calculations and obtaining access to unique hardware and software. It also gives performance statistics of the network and cost comparisons. Continued investigation of message and teleconferencing systems is described. Plans for improved usage of the ARPANET, for expansion of computer-aided communications facilities, and for investigation of networks other than the ARPANET are proposed. To date the study has demonstrated that resource sharing via networks will provide LNS with access to computer facilities not available on site, and thus improve the quality of energy research done in the laboratory. However, certain barriers, both technical and nontechnical, exist that must be overcome. In the technical area continued investigation is planned into improving the user interface to the network with cooperative projects at other sites, such as the development of a standard command language, expanded network oriented documentation, and consulting facilities. Methods of managing network services and allocating costs will be studied in an effort to eliminate some of the nontechnical barriers.

An HCl laser which uses isotopic V-V energy transfer collisions as a pumping mechanism has been demonstrated. This multiline laser, which utilized an intracavity cold gas isotope filter, increased the energy from the P/sub 1/ lines of H/sup 37/Cl while decreasng the energies of the P/sub 1/ and P/sub 2/ lines of H/sup 35/Cl. Previously unreported lines, including emission from R branch transitions, have also been observed from single-line HCl and HBr lasers.

A study on how nonfuel components of coal will affect the electron and alkali seed chemistry in a high temperature coal combustion system like those envisioned for direct fired MHD generators is described. Three specific problems are being considered. The first problem area is to characterize the formation of negative ions due to electron attachment processes in the combustion flow. While some stable negative ions may be formed from hydrocarbon combustion species (OH, HCO/sup -//sub 3/), the bulk of the stable negative ions are expected to be formed from oxidized inorganic coal slag constituents (CO/sup -//sub 2/, PO/sup -//sub 2/, AlO/sup -//sub 2/, etc). Negative ion formation can reduce the conductivity of the MHD plasma, particularly at the low temperature end of the MHD channel, thus decreasing the efficiency of power generation. This phenomena is expected to be particularly severe in electrode boundary layers, and particular attention will be paid to conditions characteristic of flow along the electrodes. The second problem area involves the role slag condensation may play in determining the electron density through recombination, also adversely affecting conductivity in the core flow. The competitive balance between thermionic emission from slag droplets and electron/ion recombination on the droplet surfaces …

In the Baseball II-T experiment a pellet generation and injection system was employed to place frozen ammonia pellets at the focus of a laser beam. The original trajectory guidance system suffered a number of problems that limited its accuracy and complicated the operation of the system. These problems were related to variable charge-to-mass ratios, timing, pellet discrimination, and computer speed. The original system design was improved by changes to the sensing components, microcomputer, and trajectory guidance system.

A parametric analysis and a preliminary conceptual design for a 1000 MWe Tandem Mirror Reactor (TMR) are described. The concept is sufficiently attractive to encourage further work, both for a pure fusion TMR and a low technology TMR Fusion-Fission Hybrid.

The products of sodium-water reactions which had taken place in the Large Leak Test Rig at the Liquid Metal Engineering Center were sampled and characterized. The products consisted of the expected compounds in the Na-O-H system, and dissolved readily in ethanol. Removal of such products from a system by melting and draining does not appear feasible, but removal by dissolution in alcoholic solvents should be investigated further.

The parametric analysis and preliminary conceptual design for a multicell field reversed mirror reactor (FRM) are described.

Information is presented concerning corrosion studies on steels.