Hanford`s missions are to safely clean up and manage the site`s legacy wastes, and to develop and deploy science and technology. Through these missions Hanford will contribute to economic diversification of the region. Hanford`s environmental management or cleanup mission is to protect the health and safety of the public, workers, and the environment; control hazardous materials; and utilize the assets (people, infra structure, site) for other missions. Hanford`s science and technology mission is to develop and deploy science and technology in the service of the nation including stewardship of the Hanford Site. Pollution Prevention is a key to the success of these missions by reducing the amount of waste to be managed and identifying/implementing cost effective waste reduction projects. Hanford`s original mission, the production of nuclear materials for the nation`s defense programs, lasted more than 40 years, and like most manufacturing operations, Hanford`s operations generated large quantities of waste and pollution. However, the by-products from Hanford operations pose unique problems like radiation hazards, vast volumes of contaminated water and soil, and many contaminated structures including reactors, chemical plants and evaporation ponds. The cleanup activity is an immense and challenging undertaking, which includes characterization and decommissioning of 149 single shell storage …

At the end of 1992, the PUREX and UO{sub 3} plants were deemed no longer necessary for the defense needs of the United States. Although no longer necessary, they were very costly to maintain in their post-operation state. The DOE embarked on a deactivation strategy for these plants to reduce the costs of providing continuous surveillance of the facilities and their hazards. Deactivation of the PUREX and UO{sub 3} plants was estimated to take 5 years and cost $222.5 million and result in an annual surveillance and maintenance cost of $2 million. Deactivation of the PUREX/UO{sub 3} plants officially began on October 1, 1993. The deactivation was 15 months ahead of the original schedule and $75 million under the original cost estimate. The annual cost of surveillance and maintenance of the plants was reduced to less than $1 million.

Since 1995 Southwire Company and Oak Ridge National Laboratory (ORNL) have jointly designed, built, and tested nine, l-m long, high temperature superconducting (HTS) transmission cable prototypes. This paper summarizes the AC loss measurements of five of the cables not reported elsewhere, and compares the losses with each other and with theory developed by Dresner. Losses were measured with both a calorimetric and an electrical technique. Because of the broad resistive transition of the HTS tapes, the cables can be operated stably beyond their critical currents. The AC losses were measured in this region as well as below critical currents. Dresner's theory takes into account the broad resistive transition of the HTS tapes and calculates the AC losses both below and above the critical current. The two sets of AC 10SS data agree with each other and with the theory quite welL In particular, at low currents of incomplete penetration, the loss data agree with the theoretical prediction of hysteresis loss based on only the outer two Iayers carrying the total current.

A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the US Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a manner that has not been done before. The AHPC concept consists of a combination of fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two collection methods, both in the particulate collection step and in transfer of the dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emission with conventional ESPs, and it solves the problem of reentrainment and collection of dust in conventional baghouses.

This amendment to Appendix B contains the specific ALARA evaluations for installing flex-pipe on riser spools to accommodate ventilation duct connections to the north risers of each tank. The work will be a routine task that is part of the Equipment Installation and Mobilization phase of the project. The dose rates were estimated using the recent Radiological Surveillance Section radiological survey: SAAS-97-063S. Task B-6 has been added to the OHF Project ALARA review process to address a field decision to modify an approach to installing the tank ventilation system. The revised approach will incorporate 12-in. diameter, 36-in. long, stainless steel flex-pipe connected to each north riser spool to address the problem of pipe fitting multiple bends and turns expected with the 12-in. PVC duct. This improved approach will reduce the time necessary to install the duct system between the tanks and the ventilation skid. However, the task includes opening the 12-in. riser spool connections to replace the currently installed blind gaskets. Since a riser spool for each tank will be opened, there is a potential for significant personnel exposure and spread of contamination that will addressed through this ALARA review process.

Due to the higher currents (and therefore higher losses) compared to individual wires and tapes, the ac loss characterization of HTS cable conductors carrying transport current can be performed using calorimetric as well as electrical methods. We discuss the main features of two calorimetric methods, one based on temperature profile determination, and one, more recently developed, based on nitrogen boil-off rate, and of the electrical method, substantially derived from that already established for tapes, based on voltage measurement by a Lock-In amplifier. Advantages and limits of each approach are analyzed and compared. Tests have been carried out with the three methods on samples 1 to 1.5 m long cut from a Bi-2223 cable conductor prototype fabricated by Pirelli in a longer length. Results obtained from measurements covering a wide range of currents are compared and thoroughly discussed.

In 1997, the authors initiated a development program in Los Alamos for high-current superconducting proton-linac technology to build prototypes components of this linac to demonstrate the feasibility. The authors are building 700-MHz niobium cavities with elliptical shapes, as well as power couplers to transfer high RF power to these cavities. The cavities and power couplers will be integrated in cryostats as linac cryomodules. In this paper, they describe the linac design and the status of the development program.

This report is on Ban of Use of Polygraph Evidence Does not amount to Abridgment of Military Defendant's Right to Present a Defense.

The development of a beam induced electron cloud in the vacuum pipe of RHIC depends mainly on three parameters: the radius of the beam pipe, the secondary emission yield of the vacuum chamber material and the time gap between two consecutive bunches. A simple model estimates the mean survival probability of electrons inn the beam pipe, the effective yield and the dissipated power in the chamber wall due to the electron cloud. Calculations are made taking into account two different operation schemes with 60 and 120 bunches respectively. No effect is expected for an operation with 60 bunches while the potential RHIC upgrade with 120 bunches runs the risk to produce an unacceptable heat load in the chamber wall.

The excitation energies of the single-particle normal and intruder levels in both `83T1 and 187Bi were measured for the first time via the ct decay of 187Bi produced in the 97Mo(92Mo,pn) 187Bi reaction. The previously unobserved 187Bi ground state (kw) to 183T1 ground state (s1/2) a transition was identified establishing the 187Bi intruder state excitation energy to be 112(21) keV, 70 keV less than that of the same level in 189Bi.

The objectives of the biosphere modeling efforts are to assess how radionuclides potentially released from the proposed repository could be transported through a variety of environmental media. The study of these transport mechanisms, referred to as pathways, is critical in calculating the potential radiation dose to man. Since most of the existing and pending regulations applicable to the Project are radiation dose based standards, the biosphere modeling effort will provide crucial technical input to support the Viability Assessment (VA), the Working Draft of License Application (WDLA), and the Environmental Impact Statement (EIS).

The purpose of this analysis is to establish bounded minimum inherent availability requirements for the Mined Geologic Disposal System (MGDS) System Description Documents (SDDs). The purpose of the bounded minimum inherent availability is to provide a lower bound on availability which will allow design to meet throughput requirements while not affecting the ability of the items to perform their intended safety function.

None

On March 30, 1998, the House considered four campaign reform bills under a suspension of rules, focusing on the comprehensive H.R. 3581, offered that day for the Republican leadership by Mr. Thomas; it failed passage on a 74-337 vote. (The bill was similar to H.R. 3485, also by Mr. Thomas, reported by the House Oversight Committee March 18.1) The bill generating the most publicity in the 105th Congress has been S. 25 (McCain-Feingold),2 introduced on March 19 as H.R. 3526 by Messrs. Shays and Meehan. This report summarizes and compares H.R. 3581, H.R. 3526, and current law.

A thorough analysis of the characteristics of a multifluid turbulent mix model in the case of one-dimensional two phase flows is presented under various physical circumstances. It has been found that the new hybrid multifluid turbulent mix model has all real characteristics if either real or turbulent viscosity is present. When real viscosity vanishes, the model still has all real characteristics for zero relative motion between fluids. For nonzero relative motions between fluids, the model will have all real characteristics if the disordered motions and turbulent viscosity together are generated with the nonzero relative motions simultaneously. The implications of the results are further discussed.

Transmission electron microscopy (TEM) has been applied to the microstructural investigation of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) thick films deposited on polycrystalline Ni-based metal substrates by pulsed laser deposition. The films were found to be strongly textured with c-axis oriented grains aligned perpendicular to the substrates. Despite the large average in-plane misorientation, as was estimated from selected area electron diffraction and x-ray diffraction, TEM inspection reveals colonies of submicron-sized grains with low angle tilt grain boundaries. The linkage of the colony structures may provide a continuous percolation pathway for the supercurrent transport in YBCO, which may provide the mechanism for the higher than expected critical current density J{sub c}. Periodic arrays of grain boundary dislocations were observed, which may serve as effective flux pinners.

This report provides information about the Possible Missile Technology Transfers from U.S. Satellite Export Policy of China. this report discusses security concern,policy changes, and a chronology of major developments since 1988.

Members of Congress are concerned about whether U.S. firms have provided technology or expertise to China for use in its ballistic missile program and whether a series of decisions by the Clinton Administration on satellite exports have facilitated legal or illegal transfers of missile-related technology to China. The New York Times reported in April 1998 that the Justice Department is conducting an ongoing criminal investigation into whether Loral Space and Communications (of New York), and Hughes Electronics (of Los Angeles) violated export control laws. The firms are alleged to have shared their findings with China on the cause of a Chinese rocket’s explosion while launching a U.S.-origin satellite in February 1996. In sharing their conclusions, the companies are said to have provided expertise that China could use to improve its ballistic missiles, including their guidance systems. This CRS report provides detailed background information, significant Congressional action, and a comprehensive chronology. The events summarized here, based on various open sources and interviews, pertain to various aspects of U.S. foreign and security policy.

It is shown that unlike a gas plasma or an electron plasma in a metal, an ionized cluster material ({open_quotes}cluster plasma{close_quotes}) permits propagation below the plasma cut-off of electromagnetic (EM) waves whose phase velocity is close to but below the speed of light. Its unique properties allow a variety of applications, including direct acceleration of particles with its EM fields and the phase matching of waves of high harmonic generation (HHG).

The application of cyclic CO2, often referred to as the CO2 Huff-n-Puff process, may find its niche in the maturing waterfloods of the Permian Basin. Coupling the CO2 Huff-n-Puff process to miscible flooding applications could provide the needed revenue to sufficiently mitigate near-term negative cash flow concerns in the capital-intensive miscible projects. Texaco Exploration & Production Inc. and the U. S. Department of Energy have teamed up in an attempt to develop the CO2 Huff-n-Puff process in the Grayburg and San Andres formations which are light oil, shallow shelf carbonate reservoirs that exist throughout the Permian Basin. This cost-shared effort is intended to demonstrate the viability of this underutilized technology in a specific class of domestic reservoir. A significant amount of oil reserves are located in carbonate reservoirs. Specifically, the carbonates deposited in shallow shelf (SSC) environments make up the largest percentage of known reservoirs within the Permian Basin of North America. Many of these known resources have been under waterflooding operations for decades and are at risk of abandonment if crude oil recoveries cannot be economically enhanced 1,2 . The selected sites for this demonstration project are the Central Vacuum Unit waterflood in Lea County, New Mexico and the …

This report contains a chronological list of commemorative observances during 1997 and 1998.

Historically, national commemorative observances were recommended by Congress through the legislative process. This practice was discontinued by the House of Representatives in January 1995, although the Senate continues to issue sense of the Senate resolutions recommending the establishment of commemoratives. It has now become standard practice for special observances to be designated by a proclamation issued by the President. This report is a chronological list of these proclamations for 1997 and 1998, indicating the proclamation number and its Federal Register citation

The Liquid Phase Methanol (LPMEOH{trademark}) demonstration project at Kingsport, Tennessee, is a $213.7 million cooperative agreement between the U.S. Department of Energy (DOE) and Air Products Liquid Phase Conversion Company, L.P. (the Partnership). Air Products and Chemicals, Inc. (Air Products) and Eastman Chemical Company (Eastman) formed the Partnership to execute the Demonstration Project. A demonstration unit producing 80,000 gallons per day (260 TPD) of methanol was designed, constructed, and has begun operation at a site located at the Eastman complex in Kingsport. The Partnership will own and operate the facility for the four-year demonstration period. This project is sponsored under the DOE`s Clean Coal Technology Program, and its primary objective is to {open_quotes}demonstrate the production of methanol using the LPMEOH{trademark} Processing conjunction with an integrated coal gasification facility.{close_quotes} The project will also demonstrate the suitability of the methanol produced for use as a chemical feedstock or as a low-sulfur dioxide, low-nitrogen oxides alternative fuel in stationary and transportation applications. The project may also demonstrate the production of dimethyl ether (DME) as a mixed coproduct with methanol, if laboratory- and pilot-scale research and market verification studies show promising results. If implemented, the DME would be produced during the last six months …

In anticipation of processing irradiated EBR-II depleted uranium blanket subassemblies in the Fuel Conditioning Facility (FCF) at ANL-West, it has been possible to obtain a limited set of destructive chemical analyses of samples from a single EBR-II blanket subassembly. Comparison of calculated values with these measurements is being used to validate a depletion methodology based on a limited number of generic models of EBR-II to simulate the irradiation history of these subassemblies. Initial comparisons indicate these methods are adequate to meet the operations and material control and accountancy (MC and A) requirements for the FCF, but also indicate several shortcomings which may be corrected or improved.