The results of a conceptual design study on incorporating a pyrolysis unit into an existing total energy plant are presented. The objectives of this study were to examine the institutional, technical and economic factors affecting the incorporation of a 25-ton/day pyrolysis unit into the Indian Creek Total Energy Plant. The Indian Creek total energy plant is described. Results of the conceptual design are presented. A survey of the availability of waste materials and a review of health and safety ordinances are included. The technical aspects of the pyrolysis system are discussed, including the results of the review of facilities requirements for the pyrolysis unit, the analysis of necessary system modification, and an estimate of the useful energy contribution by the pyrolysis unit. Results of the life-cycle cost analysis of the pyrolysis unit are presented. The major conclusions are that: there appears to be no institutional or technical barriers to constructing a waste pyrolysis unit at the Indian Creek Total Energy Plant; pyrolysis gas can be consumed in the engines and the boilers by utilizing venturi mixing devices; the engines can consume only 5% of the output of the 25-ton/day pyrolysis unit; Therefore, consumption of pyrolysis gas will be controlled by …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Meetings of the Investigation-Enforcement Subcommittees of the Texas Optometry Board.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Authority of the State Board of Insurance to license public adjusters under article 21.07-4, Insurance Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Use of comparable sales in assessing value of land used for agricultural purposes.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Authority of the Coordinating Board,Texas College and University system,to control the cost of construction programs undertaken by public college and universities.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification;Application of the open meetings acts to the Medical Advisory Board created by article 6687b,V.T.C.8.

Separate abstracts were prepared for the 16 papers presented in ERA; 10 are included in EAPA. (WHK)

The energy conservation program undertaken by ARHCO to reduce energy consumption in the operation of the fuels reprocessing and waste management facilities on the Hanford reservation is described. This program includes fuel conservation for transportation equipment at the facilities, minimizing power requirements for lighting and air conditioning buildings, and reducing the energy demands of the processes used. (LCL)

A brief summary of papers published since the last progress report (June 1974) is presented. The research represents contributions to neutron resonance spectroscopy below 100 keV. (SDF)

A feasibility study of the experimental determination of thermal conductivities of salts (NaCl) and a steel casing material using a pulsed laser technique are presented. Optically transparent materials such as salt were effectively coated with an opaque layer of aluminum or silver to satisfy test boundary conditions. Thermal conductivities for the three specimens were obtained from the thermal diffusivity, heat capacity and density relationship. Based on measurements from room temperature to 923/sup 0/K, single crystal halite yielded values ranging from 6.5 to 1.5 W/m-K versus 5.5 to 1.2 W/m-K for Avery Island Bed Salt. AISI 106-Grade B steel gave values of 46 to 29 W/m-K. While these measurements may be no better than +- 10 percent, it is possible with appropriate equipment and technique to generate data of engineering quality, +- 5 percent error, provided adequate test specimens can be fabricated. Attributes of this technique include the generation of data very quickly which is more applicable to testing large numbers of specimens relative to steady-state methods. The use of penny-sized specimens can be a problem from the fabrication requirement, especially for friable and anisotropic geological materials. The quality of the data rests on the adherence of the experimental design to …

A brief outline of existing medical heavy-ion facilities is given. The beam specifications for future dedicated medical ion accelerators are discussed. Machines capable of delivering dose rates of approximately 1 krad/min in volumes of a few liters are shown to represent existing technology. A cost and performance analysis shows the synchrotrons to be the most economical source for the heavier ions while conventional cyclotrons seem optimal for an exclusive proton facility. It is seen that the incorporation of additional capabilities such as neutron generation or radioisotope production can be achieved at modest incremental costs. In addition to the accelerators, feasible layouts of hypothetical facilities are discussed, and three-dimensional beam scanning is shown to allow the irradiation of large volumes without sacrificing the precise dose localization capabilities of heavy-ion beams. Concepts of quality-controlled engineering and modern computer technology are introduced as a means to obtain the desired high degree of reliability and ease of operation and maintenance.

Expressions are derived for the relative ion flux in the fans of a mirror fusion reactor. Numerical values are presented for typical reactor parameters.

A measurement system for transuranic aerosols has been designed that will be able to withstand the corrosive nature of stack effluents and yet have extremely high sensitivity. It will be capable of measuring 1 maximum permissible concentration (MPC) of plutonium or americium in 30 minutes with a fractional standard deviation of less than 0.33. Background resulting from /sup 218/Po is eliminated by alpha energy discrimination and a decay scheme analysis. A microprocessor controls all data acquisition, data reduction, and instrument calibration.

The incentive for high density operation of a tokamak reactor was discussed. It is found that high density permits ignition in a relatively small, moderately elongated plasma with a moderate magnetic field strength. Under these conditions, neutron wall loadings approximately 4 MW/m/sup 2/ must be tolerated. The sensitivity analysis with respect to impurity effects shows that impurity control will most likely be necessary to achieve the desired plasma conditions. The charge exchange sputtered impurities are found to have an important effect so that maintaining a low neutral density in the plasma is critical. If it is assumed that neutral beams will be used to heat the plasma to ignition, high energy injection is required (approximately 250 keV) when heating is accompished at full density. A scenario is outlined where the ignition temperature is established at low density and then the fueling rate is increased to attain ignition. This approach may permit beams with energies being developed for use in TFTR to be successfully used to heat a high density device of the type described here to ignition.

Applications of x-ray photoemission spectroscopy (XPS) to the study of actinide materials are reviewed. Examples discussed here include the band structures of thorium and uranium metal, the multiplet structure associated with the 5f electron states in oxides of the transuranium elements, the test for temporal configurations in NpO/sub 2/, crystal field splitting of the U 6p/sub /sup 3///sub 2// level in a series of uranyl compounds, mixed oxidation states in Cf/sub 7/O/sub 12/, and a test for the participation of 5f electrons in bonding in a series of uranium compounds.

The evolution of this particular blanket concept is described. The geometry of the mirror reactor blanket and the replacement methods that are employed are described. The sub-module design and its thermal-hydraulic considerations, the nuclear model geometry and compositions, and the nuclear calculational method are described. A brief reference is made to calculational vs. experimental results.

A brief description of the construction and operation of the semiautomatic dosimeter loader for TLD badges now in use at Lawrence Livermore Laboratory is given.

Classical electrodynamics is reconstructed in discrete space-time, then combined with Regge's discrete version of general relativity. Quantization using path integrals is considered briefly.

Included is a paper presented at the Annual Meeting of the Plasma Physics Division of the American Physical Society in San Francisco on November 19, 1976. The paper discusses some theoretical problems of laser target irradiation and compression investigated at the laboratory of quantum radiophysics of Lebedev Physical Institute. Of significant interest was the absorption and reflection of laser radiation in the corona plasma of a laser target. (MOW)