None

This report describes the physical description and functions of the capillary flowmeter.

This report summarizes the design and construction of the Bevatron (6-Bev proton synchrotron) with emphasis on the engineering problems. It includes specifications, outline drawings, and a bibliography of other reports concerning the subject. Operating results and changes made after the initial start-up in February 1954 are mentioned only briefly.

Disposal of wastes from the processing of solid fuel elements and from solid blanket elements is discussed. The subjects considered include extraction of uranium by several methods, the removal of element jackets, the treatment of uraxium -zirconium fuel elements, disposal into deep wells, the hydraulics of wells, thermal considerations of disposal aquifers regional hydrology, potential deep-well disposal areas in the U. S., aud the cost of disposal. (J.R.D.)

For various reasons it is not possible to leave the uranium or other nuclear fuel in a power reactor until all of it has been "burned up" by fission. In the case of liquid fuel (homogeneous) reactors a small part is continuously bled out, purified and returned. In the case of solid fuel reactors, fuel elements are periodically removed, reprocessed and the "unburned" fuel put back into service. In both cases the purification produces wastes which contain radioactive fission products and transuranic elements, and it is with the disposal of these wastes that we are concerned. For technical reasons, we will limit our consideration to the wastes from the processing of solid fuel elements, and from the processing of the very similar solid "blanket" elements in which fissionable fuel is made from non-fissionable isotopes of uranium and thorium by interaction with neutrons in the outer regions of the nuclear reactor.

"Magnetic measurements were performance at excitation levels ranging from 4000 to 7600 gauss, to study the dynamic behavior of the magnetic and gradient lengths of the CEA magnet sectors. The influence of the proposed metal vacuum chamber on field and gradient was experimentally determined. Results of measurements made with a 26 in. long grad coil and with small circular grad coils are compared. The reliability of the 26 in. long grad coil is demonstrated."

Memorandum presenting the effect of free-stream Reynolds number, engine installation, and model scale on inlet stability limits and on the amplitude and frequency of buzz. The data were taken at a free-stream Mach number of 2.0 and angles of attack from 0 to 6 degrees. Results regarding free-stream Reynolds number effect, model scale, and effect of engine on stability are provided.

Report presenting the effect of free-stream Reynolds number, engine installation, and model scale on inlet stability limits and on the amplitude and frequency of buzz. The data was obtained at mach number 2.0 and a range of angles of attack. Results regarding the free-stream Reynolds number effect, model scale, and effect of engine on stability are provided.

From introduction: This report details the results of the post-irradiation examination of a test involving one defected rod and one undefected rod.

None

A slurry addition system, a venturi in the circulation loop, and two types of sampling systems were tested with 500 and 800 g Th/kg H2O slurries in the 200 gpm loop at 250 C and 1000 psig. The addition system worked satisfactorily while the venturi gave erratic readings during part of the run. Both the capillary and in-line sampling systems proved satisfactory with the capillary sampler being much easier and more convenient to operate. The addition of uranium to the slurry had no appreciable effect on the handling characteristics, the attack rate on 347 SS, the particle size and crystallite size of the thorium oxide. The attack rate was found to be 1 mpy during the first 100 hours of circulation and decreased to 0.4 mpy at the end of the run.

Memorandum presenting a study of the performance of swirl-can combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential, sonic orifice that created a swirling fuel-air mixture within each element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of multielement combustor are provided.

Report presenting a study of the performance of "swirl-can" combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential , sonic orifice that created a swirling fuel-air mixture within the element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of the multielement performance of multielement combustor are provided.

None

This technical report summarizes some preliminary calculations of fuel exposures attainable in heterogeneous reactors, fueled with a mixture of thorium and U233, moderated with D2O and operated with no net loss in fissionable fuel.

None

Loop L-2-10 was the eighth completed in-pile loop experiment and the first in the HB-2 beam hole at the LITR. The loop was inserted on July 2, 1956 and removed on September 3, 1956. The installation, operation, removal, and general performance of the HRP in-pile solution corrosion loop in the HB-2 beam hole at the LITR are described.

Memorandum presenting the performance of a scoop-type inlet on the bottom of a body of revolution at several Mach numbers and angles of attack. The investigation included a study of the effects of altering the approach surface ahead of the inlet, extending the boundary-layer splitter plate, and bleeding air at the throat and exit of the diffuser.

Memorandum presenting a study of the performance of a scoop-type inlet on the bottom of a body of revolution at a range of Mach numbers and angles of attack to 10 degrees. The investigation included a study of the effects of altering the approach surface ahead of the inlet, extending the boundary-layer splitter plate, and bleeding air at the throat and exit of the diffuser. Results regarding the flow survey ahead of the inlet, alternative configurations, internal-flow details of the basic configuration, air bleed at the throat, and air bypass at the engine face are provided.

Report presenting testing of several underslung scoop-type inlets mounted on a body of revolution at several Mach numbers through a range of angles of attack. Geometric differences between inlets included ramp angle, frontal area, splitter-plate height, and aspect ratio. Results regarding inlet stability, peak pressure recoveries, and total-pressure distortions are provided.

Report presenting an investigation of a two-stage turbine with a downstream stator to determine the interstage flow conditions of the turbine. Results regarding stage efficiency and work output, first-stage performance, second-stage performance, and downstream-stator performance are provided.

High-Temperatare Metallurgy. A series of Inconel loops were operated to study the variation with time of depth of corrosion, effect of flow rate on corrosion, and effect of temperature drop on corrosion using fused salts. The corrosive effects of fused salts on Hastelloy B and Ni--Mo alloys are discussed. A series of Inconel--Na and Inconel-NaK forced circulation loops was operated to study the mass transfer in the systems. The mass transfer between Na and forced circulation loop of stainless steel, Incoloy, and Hastelloys B and W is discussed. Thermal convection loop corrosion resistance studies of Ni--Mo alloy, Inconel castings, and Nb in various systems are presented. Nondestructive testing methods and equipment are discussed. Methods and equipmeat used in the inspection of materials for reactor service are presented. A distillation apparatus is described for the purification of Na. To determine the effect of concentration on the diffusion coefficients, study on the rate of diffusion of NI in liquid Pb was initiated. A study is reported to determine why the protective oxide layer of Nl, Ta, and Zr becomes disrupted. A brief survey was made of the microtopography of sulfide films formed on Nb, Ta, and Zr. A research program was undertaken …

A Monte Carlo calculation for computing the diffusion coefficient and diffusion length in a linear system, with alternate solid and void segments is described. The program code is for the IBM 704. (auth)

The use of a magnetic field to control the motion of electrically conducting fluids is studied. The incompressible boundary-layer solutions are found for flow over a flat plate when the magnetic field is fixed relative to the plate or to the fluid. The equations are integrated numerically for the effect of the transverse magnetic field on the velocity and temperature profiles, and hence, the skin friction and rate of heat transfer. It is concluded that the skin friction and the heat-transfer rate are reduced when the transverse magnetic field is fixed relative to the plate and increased when fixed relative to the fluid. The total drag is increased in all of the areas.