A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether Attorney General Opinion JM-74 (1983) regarding section 6.06(e) of the Tax Code continues to be valid, and related question (ID# 31221)

This document identifies the test specification and test requirements for the 200 Area Treated Effluent Disposal Facility (200 Area TEDF) operational testing activities. These operational testing activities, when completed, demonstrate the functional, operational and design requirements of the 200 Area TEDF have been met.

This CSER justifies the Limited Control Facility designation for the closed Burning Hood in the PFP 232-Z Incinerator Facility. If the Burning Hood is opened to characterize the plutonium distribution and geometric integrity of the internals or for disassembly of the internals, then the more rigorous Fissionable Material Facility classification is required. Two sets of requirements apply for personnel access, criticality firefighting category for water use, and fissile material movement for the two states of the Burning Hood. The parameters used in the criticality analysis are listed to establish the limits under which this CSER is valid. Determination that the Burning Hood fissile material, moderation, or internal arrangements are outside these limits requires reevaluation of these parameter values and activities at the 232-Z Incinerator Facility. When the Burning Hood is open, water entry is to be prevented by two physical barriers for each water source.

The first high level waste glass to be generated at SRS will incorporate sludge from Tank 51. This sludge has been characterized by Bibler et al., who measured and estimated the radioisotope composition of the glass that might be derived from this sludge. In this report this characterization is used to determine which isotopes must be quantified to meet the legal criteria for repository placement.

Funds from this award were used to the Workshop in Computational Molecular Biology, `91 Symposium entitled Interface: Computing Science and Statistics, Seattle, Washington, April 21, 1991; the Workshop in Statistical Issues in Molecular Biology held at Stanford, California, August 8, 1993; and the Session on Population Genetics a part of the 56th Annual Meeting, Institute of Mathematical Statistics, San Francisco, California, August 9, 1993.

Crushable materials are commonly utilized in the design of structural components to absorb energy and mitigate shock during the dynamic impact of a complex structure, such as an automobile chassis or drum-type shipping container. The development and application of several finite-element material models which have been developed at various times at LLNL for DYNA3D will be discussed. Between the models, they are able to account for several of the predominant mechanisms which typically influence the dynamic mechanical behavior of crushable materials. One issue we addressed was that no single existing model would account for the entire gambit of constitutive features which are important for crushable materials. Thus, we describe the implementation and use of an additional material model which attempts to provide a more comprehensive model of the mechanics of crushable material behavior. This model combines features of the pre-existing DYNA models and incorporates some new features as well in an invariant large-strain formulation. In addition to examining the behavior of a unit cell in uniaxial compression, two cases were chosen to evaluate the capabilities and accuracy of the various material models in DYNA. In the first case, a model for foam filled box beams was developed and compared to …

The purpose of the fire hazards analysis is to comprehensively assess the risk from fire within individual fire areas in accordance with US. Department of Energy (DOE) Order 5480.7h (Reference 4.4.7.4). This document will assess the fire hazard risk within the Exploratory Studies Facility (ESF) fuel supply system, Package 1E, and evaluate whether the following objectives are met: (1) Ensure that property damage from fire and related perils do not exceed an acceptable level. (2) Provide input to the facility Safety Analysis Report (SAR).

The primary objective of this project is to conduct a cost-shared geologically targeted infill drilling filed demonstration that will enhance the domestic producibility of shallow shelf carbonate reservoirs by demonstration and technology transfer of the advanced recovery technologies employed, application of integrated reservoir management and reservoir characterization. Progress reports are presented for this past quarter for the following tasks: management and administration; reservoir characterization and analysis; integrated reservoir management; and technology transfer.

This is the decontamination, sampling, and analysis plan for the closure activities at the 105-DR Large Sodium Fire Facility at Hanford Reservation. This document supports the 105-DR Large Sodium Fire Facility Closure Plan, DOE-RL-90-25. The 105-DR LSFF, which operated from about 1972 to 1986, was a research laboratory that occupied the former ventilation supply room on the southwest side of the 105-DR Reactor facility in the 100-D Area of the Hanford Site. The LSFF was established to investigate fire fighting and safety associated with alkali metal fires in the liquid metal fast breeder reactor facilities. The decontamination, sampling, and analysis plan identifies the decontamination procedures, sampling locations, any special handling requirements, quality control samples, required chemical analysis, and data validation needed to meet the requirements of the 105-DR Large Sodium Fire Facility Closure Plan in compliance with the Resource Conservation and Recovery Act.

Models for direct containment heating (DCH) in the CONTAIN code for severe accident analysis have been reviewed and a standard input prescription for their use has been defined. The code has been exercised against a large subset of the available DCH data base. Generally good agreement with the experimental results for containment pressurization ({Delta}P) and hydrogen generation has been obtained. Extensive sensitivity studies have been performed which permit assessment of many of the strengths and weaknesses of specific model features. These include models for debris transport and trapping, DCH heat transfer and chemistry, atmosphere-structure heat transfer, interactions between nonairborne debris and blowdown steam, potential effects of debris-water interactions, and hydrogen combustion under DCH conditions. Containment compartmentalization is an important DCH mitigator in the calculations, in agreement with experimental results. The CONTAIN model includes partially parametric treatments for some processes that are not well understood. The importance of the associated uncertainties depends upon the details of the DCH scenario being analyzed. Recommended sensitivity studies are summarized that allow the user to obtain a reasonable estimate of the uncertainties in the calculated results.

The sectional high-frequency internally-cooled window, as proposed by General Atomics, has unique potential for allowing microwave sources to reach multi-megawatt CW levels with application to ECRH. Designs are being investigated using computational electromagnetic (EM), thermal, and mechanical codes at 110 GHz and 170 GHz to examine the design tradeoffs between RF performance and thermal mechanical safety margins. The EM analyses are for the window, under vacuum at one MW and includes variations in the shapes of the cooling fins, the surface treatment of the window elements themselves, the cooling fin tip treatment, the window pitch angle, and the waveguide effects. One advantage of the distributed cooled window is it`s extensibility to higher power levels. Results in the modeling efforts are presented showing the EM field concentrations (which then will feed into the thermal analysis), the energy scattering/reflection, the transmitted launch angle variation as a function of physical geometry, and the spatial energy distribution and loss as a function of time and position.

At this stage of the reservoir characterization research, the main emphasis is on the geostatistics and reservoir simulation. Progress is reported on geological analysis, reservoir simulation, and reservoir management.

A sodium carbonate salt transport system is required to support the Molten Salt Oxidation system being constructed at Lawrence Livermore National Laboratory. We are embarking on a project to create a national test bed for evaluating mixed waste destruction technologies. This project is called the Mixed Waste Management Facility. It is currently in the second phase of design and will be operational in 1998. One of the first technologies demonstrated in this facility is Molten Salt Oxidation. Molten Salt Oxidation is a thermal process that destroys the organic constituents of mixed and hazardous wastes. Sodium carbonate salt is heated in a reactor vessel to approximately 950{degrees}C. Organic wastes, along with oxidant air, are injected under the pool of molten salt. A catalytic reaction occurs converting the organics into CO{sub 2} and water. Inorganic constituents in the salt such as metals, silica, alumina, and radionuclides remain captured in the salt. Chlorides in the waste feed are converted in the salt to sodium chloride. As these impurities build up in the salt, the salt must be recycled to remove them or else the reaction rate is reduced. Spent salt is periodically taken from the reactor and transported to a salt recycle system. …

This machine cuts coal along a longwall face extending up to 500 feet by a rotating auger with bits. The machine also transports the coal that is cut acting as screw conveyor. By virtue of an integral shroud comprising part of the conveyor the machine is also amenable to a separation of the zones where men work from air being contaminated by dust and methane gas by the cutting action. Beginning as single intake air courses, the air separates at the working section where one split provides fresh air to the Occupied Zone (OZ) for human needs and the other split purges and carries away dust and methane from face fragmentation in the Cutting Zone (CZ). The attractiveness of the Variable Wall Mining Machine is that it addresses the limitations of current longwall mining equipment: it can consistently out-produce continuous mining machines and most longwall shearing machines. It also is amenable to configuring an environment, the dual-duct system, where the air for human breathing is separated from dust-laden ventilating air with methane mixtures. The objective of the research was to perform a mathematical and experimental study of the interrelationships of the components of the system so that a computer model …

The objective of this talk is to compare the CDF W+ {ge} 3 Jets data with Monte Carlo predictions using the standard model with the top quark. The data is seen to be consistent with these predictions using the t{bar t} production rate indicated by the SVX b-tagging and the previously reported top mass.

This activity plan addresses the technique and steps involved in simulating a riser installation in the dome of a single-shell waste storage tank by the used of a rotary drill rig. This simulation will provide information to avoid potential inadequacies in planning and field efforts in a nonradiological environment. Personnel can be trained in a nonradiological environmental while perfecting techniques for drilling and installing risers. It is essential that field equipment and installation procedures be perfected before the installation of risers in SSTs occurs. Time spent installing the actual risers in the SSTs will be minimized, aiding in safety of personnel and conformance to ALARA principles.

The purpose of this report is to provide the basis for answers to an Unreviewed Safety Question (USQ) safety evaluation for the gas and liquid sampling activities associated with the fuel characterization program at the 100 K West (KW) fuel storage basin. The scope of this safety evaluation is limited to the movement of canisters between the main storage basin, weasel pit, and south loadout pit transfer channel (also known as the decapping station); gas and liquid sampling of fuel canisters in the weasel pit; mobile laboratory preliminary sample analysis in or near the 105 KW basin building; and the placement of sample containers in an approved shipping container. It was concluded that the activities and potential accident consequences associated with the gas and liquid sampling of 100 KW fuel canisters are bounded by the current safety basis documents and do not constitute an Unreviewed Safety Question.

The purpose of this report is to provide the basis for answers to an Unreviewed Safety Question (USQ) safety evaluation of the 105K East (KE) and 105K West (KW) in-basin activities associated with the fuel characterization program as described in the characterization shipping plan. The significant activities that are common to both 105 KE and 105 KW basins are the movement of canisters from their main basin storage locations (or potentially from the 105 KE Tech View Pit if a dump table is available) to the south loadout pit transfer channel, hydrogen generation testing in the single element fuel container, loading the single element fuel container into the shipping cask, loading of the shipping cask onto a flat-bed trailer, return of the test fuel elements or element pieces from the 327 facility, placement of the fuel elements back into Mark 2 canisters, and placement of the canisters in the main storage basin. Decapping of canisters in the south loadout pit transfer channel and re-encapsulation of canisters are activities specific to the 105 KW basin. The scope of this safety evaluation includes only those characterization fuel shipment activities performed in the 105 KE and 105 KW fuel storage basin structures up …

N-Reactor spent fuel elements will be removed from the sealed fuel storage canisters in the KW Basin and shipped to the 300 Area hot cells for characterization studies. Some of the canisters contain broken fuel elements exposing metallic uranium to the canister water. The exposed uranium surfaces have reacted with the water releasing fission product nuclides to the canister water. The extent of this release is unknown, but large radionuclide inventories could cause significant releases to the basin water. To avoid this, a method is needed to evaluate the magnitude of the canister water radioactivity to help make decisions about which canisters should not be opened for fuel sampling. The objective of this document is to provide a conceptual description of the process for obtaining and evaluating gas and liquid samples from KW fuel canisters in support of fuel characterization shipments. Also described are the decisions regarding the acceptability of a sample, the actions to be taken to obtain an acceptable sample, and the logical leading to decisions about opening canisters for fuel characterization sampling. This document will help guide a safety analysis of the liquid sampling process and the development of detailed procedures for the process. Outside the scope …

This engineering note documents the design of the heat exchanger support brackets. The heat exchanger is roughly 40 feet long, 22 inches in diameter and weighs 6750 pounds. It will be mounted on two identical support brackets that are anchored to a concrete wall. The design calculations were done for one bracket supporting the full weight of the heat exchanger, rounded up to 6800 pounds. The design follows the American Institute of Steel Construction (AISC) Manual of steel construction, Eighth edition. All calculated stresses and loads on welds were below allowables.