Memorandum presenting a procedure for obtaining qualitative information on the effectiveness of different slot configurations to make the flow of the cooling air visible. Two methods are utilized: one utilizes the traces caused by a reaction between paint spread over the blade surface and a gas mixed with the cooling air, while the other utilized smoke mixed with the cooling air to make it visible. From the visual observations, the use of a continuous slot as a means of creating the cooling film over the blade surface appeared to be superior to the use of holes or grooves.

From Summary: "Procedures for applying these analytical methods to experimentally measured blade-metal temperatures are presented. Data are presented for the leading and trailing edge of a symmetrical water-cooled blade to illustrate the validity of the methods for those portions of the blade. In addition to the application to turbine blades, the methods can be applied to any heat-transfer apparatus having a profile that can be approximated by the shape discussed."

Report presenting testing of a rocket-powered model of a fin-stabilized parabolic body of revolution with fineness ratio 8.91 and maximum diameter at 80 percent of body station at a range of Mach numbers to determine the static pressures at two orifices on the rearward side of the stabilizing fins. Results regarding measured pressures, comparison of theory and experiment, and drag are provided.

Report presenting exploratory testing obtained with leading-edge wing chord-extensions on two 52 degree sweptback wings. The wings had the same aspect ratio but different airfoil sections. Results regarding force characteristics and flow characteristics are provided.

Memorandum presenting an investigation of the interference at the root of a sweptback wing at high subsonic Mach numbers by means of wind-tunnel measurements of a wing-body combination with the 50-percent-chord line of the wing either unswept or swept back 35 degrees. Results regarding body characteristics, pressure studies, tuft studies, and force studies are provided.

Report presenting an analysis of the flow conditions downstream of a cascade of turbine rotor blades at critical and supercritical pressure ratios. Five theoretical methods are compared with an experimental method using the conservation-of-momentum principle and static-pressure surveys as well as schileren photographs of the flow downstream of the blades. Results regarding static-pressure surveys and schileren photographs are provided.

Report presenting an investigation using the transonic-bump method through a range of Mach numbers in the high speed 7- by 10-foot tunnel to determine the lateral-control characteristics of 30-percent-chord flap-type controls with various spans and spanwise locations. Rolling moments, pitching moments, and lift were obtained through a small range of control deflections.

An investigation of turbojet-engine thrust augmentation by means of tail-pipe burning has been conducted in the NACA Lewis altitude wind tunnel.

An altitude-chamber investigation of British Rolls-Royce Nene II turbojet engine was conducted over range of altitudes from sea level to 65,000 feet and ram pressure ratios from 1.10 to 3.50, using an 18.00-inch-diameter jet nozzle. The 18.00-inch-diameter jet nozzle gave slightly lower values of net-thrust specific fuel consumption than either the 18.41- or the standard 18.75-inch-diameter jet nozzles at high flight speeds. At low flight speeds, the 18.41-inch-diameter jet nozzle gave the lowest value of net-thrust specific fuel consumption.

Report presenting an investigation of a rectangular wing with a subsonic-type round-leading-edge airfoil section (NACA 65-009) at various Mach numbers. The results generally agreed with calculated values with the exception of the laminar-separated region on the low-pressure surface of the model. Results regarding the calculation of pressure distribution, experimental pressure distributions, aerodynamic characteristics, and shadowgraph studies are provided.

Report presenting the planing characteristics for six surfaces representative of hydro-ski forms as determined by tank tests.Testing was made at specified trims, speeds, and sufficient loads to define variations with wetted length. Data from the testing is provided in the form of plots of wetted length, load, resistance, trimming moment, and draft against wetted area.

Memorandum presenting an investigation of a series of wing-fuselage configurations to determine the effects of wing geometry on aerodynamic characteristics. This paper presents the force, moment, wake, and downwash measurements made on a fuselage and wing-fuselage combination of specified measurements. The current phase of the investigation is focused on varying the sweepback of the 0.25-chord line of the wing.

"A complete stage of an axial-flow compressor designed to produce a high pressure ratio was investigated at speeds from 110 to 130 percent of design speed (836 ft/sec). The data obtained and the results of a previous investigation of the same compressor at speeds from 50 to 100 percent of design speed were used to determine the effect of Mach number on over-all performance. The peak total-pressure ratio increased from 1.095 to 1.515 and the peak adiabatic efficiency decreased from 0.93 to 0.89 as the relative inlet Mach number increased from 0.34 to 0.77. At a relative inlet Mach number of 0.91, a total-pressure ratio of 1.635 was obtained at an adiabatic efficiency of 0.74" (p. 1).

Report presenting an investigation to determine the static lateral control characteristics of a supersonic aircraft configuration at Mach numbers of 1.40 and 1.59. The aileron effectiveness was about half of what was predicted by calculations, which was mainly due to flow separation in the region of the aileron. Information about other aileron characteristics and characteristics in sideslip is provided.

Report discussing testing to determine the supersonic aerodynamic characteristics of four sweptback wings and wing-body configurations at several angles. Information about basic wing data, modifications to the 60 degree wing, the effects of sweep, and effects of fuselage are included.

"An investigation is made of the buckling of the compression cover of post-stiffened box beams subjected to end moments. Charts are presented for the determination of the minimum post axial stiffnesses and the corresponding compressive buckling loads required for the compression cover to buckle with nodes through the posts. Application of the charts to design and analysis and the limitations of their use are discussed" (p. 1087).

The use of inlet guide vanes with the 24-inch supersonic compressor resulted in a decrease in maximum pressure ratio and adiabatic efficiency, and a slight increase in equivalent mass flow. The loss in total pressure and efficiency resulted from reduced diffusion in the rotor-blade passages, increased shock losses at the higher entrance Mach number, and increased mixing separation, and transfer of mass flow toward the rotor hub. The unsteady flow field created at the compressor entrance by the guide-vane wakes is also responsible for some of the losses. This inherent loss will be encountered whenever inlet guide vanes are used with the shock-in-rotor type of supersonic compressor.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The validity of S.B. No. 35, Acts 51st Legislature, 1st Called Session, 1950, making an appropriation from the Securities Act Fund to defray expenses of publishing the laws of said called session.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The applicability of the motor vehicle use tax to a vehicle leased from an out of state owner and used and registered in Texas by the lessee.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The basis for franchise taxes under the submitted facts relative to the refinancing of an outstanding indebtedness.

The lifetime for the decay of a {pi} meson into {mu} meson and neutral particle was first measured by Richardson and later by Martinelli and Panofsky. The method was the same in both cases: The fraction of {pi} mesons surviving various times of flight is measured by placing photographic detectors at various path lengths from the target. In the experiment reported here we observe the time lag between the two bursts of fluorescence due to mesons decaying in a scintillation crystal. The first burst is due to the stopping of the entering {pi} meson, the second to the {mu}-meson. As is shown in Fig. 1, a particle penetrating the first and into the second crystal starts the sweep (10{sup -8} sec/mm) of an oscilloscope. The pulses in the second crystal are delayed 0.5 x 10{sup -6} sec to allow the sweep to start and brighten and are then photographed. If the responsible particle is a {pi}{sup +} meson which stops in the crystal, it undergoes {pi}-{mu} decay and two pulses appear on the trace. The {mu}{sup +} meson has a range of only 2 mm in the crystal. If its decay electron is detected some time (.5-2.5 x 10{sup -6} …

None

None

None