From Introduction: "The rolling-pullout maneuver (any maneuver in which rolls occur during high g flight conditions) has been shown to be pertinent to design considerations from the standpoint of the loads produced on a vertical tail (refs. 1 to 3). In order to understand this problem better, the results of an analytical study of effects of large variations of some of the lateral-stability-derivative coefficients on the maximum angle of sideslip at first peak of its oscillation are presented in this paper. Also, expressions for estimating the effects of small variations of or errors in these coefficients on the maximum sideslip angle have been developed and are presented. "

A device has been designed which will support small spheres and cylinders in a vacuum system during a plating operation. While supporting the object to be plated, the device automatically shifts the position of the supports so that the coating is evenly distributed. This report describes the mechanism by which this motion is achieved.

Memorandum presenting the application of the concept of indicial functions to the analysis of the aerodynamic phenomena associated with the short-period pitching mode of wings in subsonic and supersonic flight. Simple physical relationships are pointed out and are used to study the effect on the rotary-damping-moment coefficient of changes in center-of-gravity position, Mach number, aspect ratio, plan form, frequency, and thickness.

A preliminary study of positive pion production from proton-nucleus collisions revealed that positive pion production cross sections agree more favorably with a Z 2/3 variation than with a variation proportional to the atomic number. A similar study on negative pion production has shown that negative pion yields from proton-nucleus collisions tend to vary in proportion to the number of neutrons in the nucleus. As a result an experiment was performed to investigate if there is a significant change in positive pion production with changing atomic number at two lower pion energies.

Report presenting a simplified limiting-blade-loading parameter for axial-flow-compressor blade elements derived from the application of a separation criterion used in two-dimensional boundary-layer theory to a typical suction-surface velocity distribution of a compressor blade element at design angle of attack. Results regarding two-dimensional cascade, compressor rotors, and compressor stators are provided.

Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1800 F in air was found to triple the room-temperature ductility of the brazed joint."

Report presenting the effect of preinjection-fuel temperature on vaporization rates and combustion efficiency of a 16-inch ram-jet engine for two different fuels. Variation of the location of the fuel injectors and use of control sleeves were also explored.

Memorandum presenting an investigation in the supersonic blowdown tunnel to determine the effects of span and spanwise and chordwise location on the control characteristics of spoilers on a 6-percent-thick, 50 degrees sweptback wing of aspect ratio 2.5 and taper ratio of 0.625. The results of the investigation indicate that the inboard spoilers located at the rearward chordwise station produce the highest rolling-moment effectiveness.

Theory and experiment were compared and found in good agreement for the elastic Buckling under combined stresses of long flat plates with integral waffle-like stiffening in a variety of configurations. For such flat plates, 45deg waffle stiffening was found to be the most effective of the configurations for the proportions considered over the widest range of combinations of compression and shear.

The results of electrical resistance measurements have been used as a means of following changes occurring in metals due to irradiation. The electrical conductivity is sensitive to changes in composition and to cold-work or structure damage. In an anisotropic metal, such as uranium, the director of measurement also influences to some extent the values obtained. For these reasons it is essential to use the same material, and if possible the same piece of material, in comparing the electrical properties before and after irradiation. This report is a description of the measurements made on pieces of the same uranium rod before and after an exposure of approximately 150 MWD/T. The results, while preliminary in nature and dealing only with one sample and exposure level, provide data for which a comparison may be made of the electrical resistivity of irradiated and non-irradiated uranium metal.

Memorandum presenting an investigation of water spray cooling of turbine rotor blades with a representative centrifugal-flow turbojet engine. Water injection from several stationary configurations was investigated in order to determine the most favorable configuration on an overall basis. Results regarding blade temperature distributions, cooling efficiencies of various configurations, rotor blades failures, rotor blade spray patterns, and overall comparison of injection configurations are provided.

Report presenting information on landing gear applied drag loads and the nature of wheel spin-up in landing based on testing in the Langley impact basin. Particular attention is paid to the nature and variation of the coefficient of friction between the tire and runway during the wheel spin-up process. Results regarding the fundamentals of the process, comparison of maximum loads, variation of coefficient of friction, and effect of prerotation are provided.

External-drag data are presented for normal-shock nose inlets with NACA 1-series, parabolic, and conic cowling profiles. The tests were made at an angle of attack of 0 degrees by using rocket-propelled models in free flight at Mach numbers from 0.9 to 1.5. The Reynolds number based on body maximum diameter varied from 2.5 x 10 sup 6 to 5.5 x 10 sup 6.

Report presenting an investigation of the flow properties of a constant-outer-wall annual diffuser in combination with a tailpipe in order to come up with a configuration suitable for turbojet afterburners. Information about axial inlet flow and whirling inlet flow is provided. During testing, a vena contrata region formed downstream from the center body terminal and rendered the first 1/2 diameter of the tailpipe ineffective.

From introduction: "This report summarizes the work done on a study of fused-salt systems in a search for new liquid fuels suitable for use in a nuclear power reactor."

Report presenting an experimental investigation at Mach number 1.90 to determine the effect of a diverter-type boundary-layer removal system on the performance of a scoop inlet. The supersonic portion of the inlet consisted of a two-dimensional, reverse Prandtl-Meyer turn followed by a constant-area throat. Results regarding the effect of fuselage position and subsonic diffuser performance are provided.

From Summary: "A method is presented for calculating the lift and centers of pressure of wing-body and wing-body-tail combinations at subsonic, transonic, and supersonic speeds. A set of design charts and a computing table are presented which reduce the computations to routine operations. Comparison between the estimated and experimental characteristics for a number of wing-body and wing-body-tail combinations shows correlation to within + or - 10 percent on lift and to within about + or - 0.02 of the body length on center of pressure."

Report presenting an investigation to determine the effects of a horizontal tail on the longitudinal stability characteristics of a swept-back, twisted, and cambered wing in combination with a fuselage and various combinations of high-lift and stall-control devices. The ideal placement of the horizontal tail appeared to be at 6 percent wing semispan below the wing-root-chord plane.

None

Report presenting an experimental investigation of the application of transpiration air-cooling to the combustion-chamber wall of an afterburner. Results regarding the typical temperature and pressure profiles, correlation of wall temperatures, distribution of cooling-air flux density, longitudinal distribution of cooling air, longitudinal distribution of wall temperature, effect of permeability on cooling-air requirements, and fabricating and operating problems are provided.

Report presenting an investigation to determine the performance of a conical-nose supersonic diffuser at angle of attack. The inlet had a pivoting cone which could be oriented to any of several angles independent of the angle of attack of the diffuser. Results regarding total-pressure recovery and mass-flow characteristics, cowl lip position, cone position relative to angle of attack, shadowgraphs, and contour maps are provided.

Report presenting an investigation of a 15 degree semiangle movable-cone variable-geometry ram-jet inlet to determine the variable-geometry effect on total-pressure recovery at free-jet Mach numbers of 1.62, 2.00, 2.53, and 3.05 at zero angles of attack and yaw. Generally, increasing the cowling-position parameter increased the value of both total-pressure recovery and mass-flow ratio. Results regarding the total-pressure recovery, shadowgraphs, and total-pressure recovery as a function of free-stream Mach number are provided.

Report presenting a flight investigation to study in detail the response of an airplane structure during buffeting. Measurements of acceleration on selected points were made during buffeting for two different conditions of lift coefficient and Mach number and the time histories of acceleration were studied using electrical frequency-analysis techniques. Results regarding the ground response measurements, response to buffeting excitation, verification of the measured results, and the pilot's observation of the buffeting are provided.

Abstract: A device is proposed for confining charged particles to a localized region of space by means of the alternating electric field of a resonant cavity. The motion of single electrons in the field is stable. The limitations to particle density and temperature are discussed, and found to be too severe to allow the device to serve as a reactor, although it might be a useful laboratory tool.