This document provides a trend analysis for the Savannah River Reactor Restart Program. The data contained in this report is comprised of Nonconformance Report (NCR), Surveillance Reports, and Corrective Action Reports (CAR). The data trended now includes six quarters and provides the capability of looking at changing patterns in the various performance categories over time.

DOE is employing the principle of comparability with the NRC requirements to guide its safety program. Since the safety record of research reactors licensed by the NRC has been established and accepted, the comparison of DOE Orders applicable to DOE research reactors with the NRC regulations applicable to research reactors would identify strengths and weaknesses of the DOE Orders. The comparison was made in 14 general topics of safety which are labeled Areas of Safety Concerns. This paper focuses on the Area of accident analysis and safety review and presents recommendations in these areas. 12 refs.

This report gives a general overview of the EGS[underscore]Windows2 program. The program is intended to be used to display individual particle histories of electrons, photons, and positrons generated by the EGS4 Code System. Much of this work is based on the earlier version of EGS[underscore]Windows2 from the Institute for National Measurement Standards at the National Research Council of Canada (NRCC). No attempt is made to modify their EGS subroutine WATCH, which is used to output the particle vectors to be read by EGS-Windows, or duplicate any of the documentation describing the subroutine. EGS[underscore]Windows2 reads data in the same format as produced by WATCH. Users of EGS[underscore]Windows2 are encouraged to obtain the original EGS[underscore]Windows report from the NRCC in addition to this report as complete documentation of EGS[underscore]Windows2. As in the original report, two levels of information are covered in this report: the user level, and the programmer level. The user level should be read by all users. It describes execution, operation, and capabilities. The programmer level should be read by those users who may want to modify the program or who would like a more detailed understanding. It describes briefly the routines and there function, as well as the major …

BIOMOVS (BIOspheric MOdel Validation Study) is an international cooperative study initiated in 1985 by the Swedish National Institute of Radiation Protection to test models designed to calculate the environmental transfer and bioaccumulation of radionuclides and other trace substances. The objective of the symposium and workshop was to synthesize results obtained during Phase 1 of BIOMOVS (the first five years of the study) and to suggest new directions that might be pursued during Phase 2 of BIOMOVS. The travelers were an instrumental part of the development of BIOMOVS. This symposium allowed the travelers to present a review of past efforts at model validation and a synthesis of current activities and to refine ideas concerning future development of models and data for assessing the fate, effect, and human risks of environmental contaminants. R. H. Gardner also visited the Free University, Amsterdam, and the National Institute of Public Health and Environmental Protection (RIVM) in Bilthoven to confer with scientists about current research in theoretical ecology and the use of models for estimating the transport and effect of environmental contaminants and to learn about the European efforts to map critical loads of acid deposition.

An increase in the number of copper plumbing failures at Mound prompted a thorough analysis of the failed components. Most of the components were elbow joints. All of these parts exhibited the same type of accelerated deterioration. The failed parts were analyzed optically and by scanning electron microscopy. Water chemistry, solder, and soldering fluxes were evaluated to determine their possible roles in the accelerated attack. Cross-sectioning of the elbow joints revealed residual soldering flux and cutting burrs on the inside of the elbows. Water analysis showed Mound's water was rated as corrosive. Recommendations for improved workmanship and design are presented. Testing of potable water at a regular basis was also recommended. 8 refs., 10 figs., 3 tabs.

The filamentation instability can lead to regions of increased laser intensity when a spatially nonuniform laser beam interacts with a plasma. An experimental technique will be described which identifies the density perturbation produced by filaments. The growth of filaments has been investigated and, when the laser intensity is large enough, the transverse density profile of the filament can be measured. Evidence of filament growth influenced by plasma flow and density gradients is presented. 19 refs., 4 figs.

The Centralized Reliability Data Organization is a data bank and data analysis center, focusing on reliability, availability, and maintainability (RAM) data for components (e.g., valves, pumps, etc.) operating in liquid metal reactors and test facilities. PNC staff are using the CREDO data base as a resource for their development of a probabilistic safety assessment (PSA) for the MONJU fast breeder reactor now under construction. The meeting was held to discuss: (a) progress in FY 1989, (b) resolution of data base deficiencies and inconsistencies, (c) clarification of definitions for failure mode and failure cause, (d) component boundary definitions, (e) goals and objectives for the remainder of the fiscal year, and (f) proposals for future work. General agreement was reached on the need for improvements to the data base: resolution of data deficiencies and inconsistencies, reduction of the number of failure modes and causes, inclusion of failure severity, and a specific delineation of the boundary for each of the generic components. A schedule will be provided to PNC by 1 March 1991 addressing these issues. A proposal to develop a hybrid mainframe/PC reliability data base to improve user access was declined. A second proposal to develop a reliability data base for PNC's …

We have used high-resolution x-ray spectroscopy to investigate inner-shell ionization of Cr{sup 21+} ions by electron impact using the Electron Beam Ion Trap at Lawrence Livermore Laboratory. Our measurements indicate that inner-shell ionization enhances the intensity of the radiative transition 1s2s {sup 3}S{sub 1}{yields}1s{sup 2}{sup 1}S{sub 0}. 7 refs., 4 figs., 1 tab.

At the request of Mr. H.L. Brandt and others in the Savannah River Field Office High Level Waste Division office, DWPF, and SRL personnel have reviewed two potential applications for supercritical water oxidation technology in DWPF. The first application would replace the current hydrolysis process by destroying the organic fractions of the precipitated cesium / potassium tetraphenylborate slurry. The second application pertains to liquid benzene destruction. After a thorough evaluation the first application is not recommended. The second is ready to be tested if needed.

Objective is to understand the mechanisms governing nonequilibrium plasma atomistic or molecular deposition of hard face coatings. Laser diagnostic methods include coherent anti-Stokes Raman spectroscopy (CARS) and laser-induced fluorescence. TiB[sub 2] and diamonds were used as the hard face coating materials. Diborane was used as precursor to TiB[sub 2].

The project on biotechnology of indirect liquefaction was focused on conversion of coal derived synthesis gas to liquid fuels using a two-stage, acidogenic and solventogenic, anaerobic bioconversion process. The acidogenic fermentation used a novel and versatile organism, Butyribacterium methylotrophicum, which was fully capable of using CO as the sole carbon and energy source for organic acid production. In extended batch CO fermentations the organism was induced to produce butyrate at the expense of acetate at low pH values. Long-term, steady-state operation was achieved during continuous CO fermentations with this organism, and at low pH values (a pH of 6.0 or less) minor amounts of butanol and ethanol were produced. During continuous, steady-state fermentations of CO with cell recycle, concentrations of mixed acids and alcohols were achieved (approximately 12 g/l and 2 g/l, respectively) which are high enough for efficient conversion in stage two of the indirect liquefaction process. The metabolic pathway to produce 4-carbon alcohols from CO was a novel discovery and is believed to be unique to our CO strain of B. methylotrophicum. In the solventogenic phase, the parent strain ATCC 4259 of Clostridium acetobutylicum was mutagenized using nitrosoguanidine and ethyl methane sulfonate. The E-604 mutant strain of Clostridium …

A systematic approach has been developed and experimentally validated for the sampling and chemical characterization of the rocket motor exhaust generated from the firing of scaled down test motors at the US Army's Signature Characterization Facility (ASCF) at Redstone Arsenal in Huntsville, Alabama. The overall strategy was to sample and analyze major exhaust constituents in near real time, while performing off-site analyses of samples collected for the determination of trace constituents of the particulate and vapor phases. Initial interference studies were performed using atmospheric pressure burns of 1 g quantities of propellants in small chambers at Oak Ridge National Laboratory. Carbon monoxide and carbon dioxide were determined using non-dispersive infrared instrumentation. Hydrogen cyanide, hydrogen chloride, and ammonia determinations were made using ion selective electrode technology. Oxides of nitrogen were determined using chemiluminescence instrumentation. Airborne particulate mass concentration was determined using infrared forward scattering measurements and a tapered element oscillating microbalance, as well as conventional gravimetry. Particulate phase metals were determined by collection on Teflon membrane filters, followed by inductively coupled plasma and atomic absorption analysis. Particulate phase polynuclear aromatic hydrocarbons (PAH) and nitro-PAH were collected using high volume sampling on a two stage filter. Target species were extracted, and quantified …

This report summarizes the progress and accomplishments of this research project from September 1, 1989 to February 28, 1993. During this period, we have accomplished all of the primary scientific objectives of the research proposal: (1) constructed and evaluated a laser-induced fluorescence detection system that allows direct examination of the chromatographic column, (2) examined nonequilibrium processes that occur upon solute injection and elution, (3) examined solute retention in liquid chromatography as a function of temperature and pressure, (4) examined solute zone dispersion in liquid chromatography as a function of temperature and pressure, and (5) developed appropriate theoretical models to describe these phenomena. In each of these studies, substantial knowledge has been gained of the fundamental processes that are responsible for chromatographic separations. In addition to these primary research objectives, we have made significant progress in three related areas: (1) examined pyrene as a fluorescent polarity probe insupercritical fluids and liquids as a function of temperature and pressure, (2) developed methods for the class-selective identification of polynuclear aromatic hydrocarbons in coal-derived fluids by microcolumn liquid chromatography with fluorescence quenching detection, and (3) developed methods for the determination of saturated and unsaturated (including omega-3) fatty acids in fish oil extracts by microcolumn …

The second phase of research performed at The Electrosynthesis Co., Inc. has demonstrated the successful removal of nitrite and nitrate from a synthetic effluent stream via a direct electrochemical reduction at a cathode. It was shown that direct reduction occurs at good current efficiencies in 1,000 hour studies. The membrane separation process is not readily achievable for the removal of nitrites and nitrates due to poor current efficiencies and membrane stability problems. A direct reduction process was studied at various cathode materials in a flow cell using the complete synthetic mix. Lead was found to be the cathode material of choice, displaying good current efficiencies and stability in short and long term tests under conditions of high temperature and high current density. Several anode materials were studied in both undivided and divided cell configurations. A divided cell configuration was preferable because it would prevent re-oxidation of nitrite by the anode. The technical objective of eliminating electrode fouling and solids formation was achieved although anode materials which had demonstrated good stability in short term divided cell tests corroded in 1,000 hour experiments. The cause for corrosion is thought to be F[sup [minus]] ions from the synthetic mix migrating across the cation …

The aim of this project is to perform quantitative analysis of the Fourier transform infrared (FT-IR) spectra of coals and coal extracts. The major difficulty encountered in the analysis of the FT-IR spectra of coals is the complexity of the bands, which consist of many closely overlapped peaks. Two techniques that are commonly used for the quantitative analysis of complex FT-IR spectra are deconvolution and curve-fitting. Deconvolution is a mathematical technique that narrows the speaks in a spectrum, thereby improving the effective resolution. Curve-fitting optimizes a set of ban parameters, using a least squares criterion, to simulate the true spectrum. We have recently completed work on optimizing the combination of these two techniques with the aim of applying this to the spectra of coals and coal extracts. Two types of deconvolution were investigated in this context: Fourier self-deconvolution (FSD) and maximum likelihood restoration (MLR). It was concluded that for noisy spectra MLR gave superior results. 3 refs., 7 figs.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.