Construction of a large tandem mirror (MFTF-B) will soon begin at Lawrence Livermore National Laboratory (LLNL). Designed to reach break-even plasma conditions, the facility will significantly advance the physics and technology of magnetic-mirror-based fusion reactors. This paper describes the objectives and the design of the facility.

The proposed October 1983 EPA ambient lead criteria document, Air Quality Criteria for Lead is reviewed from the perspective of DOE's policies and programs and addresses potential impacts on energy production and energy-intensive industries. Following an introduction, the study is organized in five subsequent sections. Section 2.0 addresses environmental and health effects of exposure to lead. Section 3.0 reviews sources of lead emissions. Section 4.0 presents information on lead concentrations in ambient air. Section 5.0 examines dose-effect relationships among lead emissions, ambient air concentrations and blood lead levels. Section 6.0 presents Radian's evaluation of the regulatory implications of the criteria document and the information it provides. 10 figures, 11 tables.

TMX Upgrade (TMX-U), a tandem mirror experiment at LLNL, will use high power microwaves for electron cyclotron resonant heating (ECRH). As demonstrated on Elmo Bumpy Torus (EBT) and related experiments which use similar heating techniques, high energy electron populations are created. In these devices, which run CW, significant x-ray production occurs and adequate shielding must be provided for personnel protection. TMX-U is a pulsed experiment; however, significant x-ray production is expected from the 50 keV mean energy electron population. In this report the expected x-ray generation is calculated and the provisions for shielding are described. Based upon these calculations, as well as scaling estimates from other devices, the provided shielding is shown to be adequate for hot electron temperatures of interest for the experiment.

Site characteristics pertinent to the geothermal development are described, including: physiography, demography, economy, and goals and objectives of the citizens as they relate to geothermal development. The geothermal reservoir is characterized on the basis of available information. The probable drilling depth to the reservoir, anticipated water production rates, water quality, and resource temperature are indicated. Uses of the energy that seem appropriate to the situation both now and in the near future at Hawthorne are described. The essential institutional requirements for geothermal energy development are discussed, including the financial, environmental, and legal and regulatory aspects. The various steps that are necessary to accomplish the construction of the geothermal district heating system are described.

Employing the current world average ..lambda../sub MS/ = 0.160 GeV as input, the minimal Georgi-Glashow SU(5) model predicts sin/sup 2/theta/sub W/(m/sub W/) = 0.214, m/sub b//m/sub tau/ approx. = 2.8 and tau/sub p/ approx. = (0.4 approx. 12) x 10/sup 29/ yr. The first two predictions are in excellent agreement with experiment; but the implied proton lifetime is already somewhat below the present experimental bound. In this status report, uncertainties in tau/sub p/ are described and effects of appendages to the SU(5) model (such as new fermion generations, scalars, supersymmetry, etc.) are examined.

This paper describes the desktop computer/CAMAC-based system that controls the power source for the Tandem Mirror Experiment-Upgrade (TMX-U) magnet power system. Presently it contains 42 dc rectifier power supplies connected to 24 magnet coils arranged in 17 circuits. During each shot, the system delivers 22.6 MW dc to the magnets for about 3 s. The system is presently being changed to add six power supplies, two solenoidal throttle coils, and two reverse C-coils. When complete, the delivered power will increase to 36.9 MW. The closed-loop control system usually provides current (and thus, magnetic field) that is within 1% of the requested current. Achieving this accuracy required using grounding, shielding, and isolation methods to reduce noise and related problems. These are also discussed.

This report contains the text and slide reproductions of a speech on nuclear waste disposal in basalt. The presentation addresses the layout of repository access shafts and subsurface facilities resulting from the conceptual design of a nuclear repository in basalt. The constructibility issues that must be resolved prior to construction are described. (DMC)

Modern differential geometric techniques are used to unify the physical asymptotics underlying mechanics, wave theory and statistical mechanics. The approach gives new insights into the structure of physical theories and is suited to the needs of modern large-scale computer simulation and symbol manipulation systems. A coordinate-free formulation of non-singular perturbation theory is given, from which a new Hamiltonian perturbation structure is derived and related to the unperturbed structure. The theory of perturbations in the presence of symmetry is developed, and the method of averaging is related to reduction by a circle group action. The pseudo-forces and magnetic Poisson bracket terms due to reduction are given a natural asymptotic interpretation. Similar terms due to changing reference frames are related to the method of variation of parameters, which is also given a Hamiltonian formulation. These methods are used to answer a question about nearly periodic systems. The answer leads to a new secular perturbation theory that contains no ad hoc elements. Eikonal wave theory is given a Hamiltonian formulation that generalizes Whitham's Lagrangian approach. The evolution of wave action density on ray phase space is given a Hamiltonian structure using a Lie-Poisson bracket. The relationship between dissipative and Hamiltonian systems is discussed. …

Experimental data is being obtained from operating a high temperature heat pump system. The use of methanol as a working fluid will necessitate careful monitoring of refrigerant temperatures and pressures with chemical analysis performed on the working fluid during scheduled down time. Materials sent to vendors by Auburn University and quotes received by Auburn concerning equipment (compressor, evaporator, condensor, air heater, dryer, two accumulator tanks, and three expansion valves) are discussed. The simulated dryer and two accumulator tanks were designed by Auburn. The detailed design and pricing estimates are included. Additional information is presented on layout and construction; start-up; testing; shut down; scheduled maintenance and inspection; safety precautions; control system; and trouble shooting.

A control system for the automatic or self-actuated shutdown or scram of a nuclear reactor is described. The system is capable of initiating scram insertion by a signal from the plant protection system or by independent action directly sensing reactor conditions of low-flow or over-power. Self-actuation due to a loss of reactor coolant flow results from a decrease of pressure differential between the upper and lower ends of an absorber element. When the force due to this differential falls below the weight of the element, the element will fall by gravitational force to scram the reactor. Self-actuation due to high neutron flux is accomplished via a valve controlled by an electromagnet and a thermionic diode. In a reactor over-power, the diode will be heated to a change of state causing the electromagnet to be shorted thereby actuating the valve which provides the changed flow and pressure conditions required for scramming the absorber element.

Several of the important health and environmental risks associated with a reference geothermal industry that produces 21,000 MW/sub e/ for 30 y (equivalent to 20 x 10/sup 18/ J) are assessed. The analyses of health effects focus on the risks associated with exposure to hydrogen sulfide, particulate sulfate, benzene, mercury, and radon in air and arsenic in water. Results indicate that emissions of hydrogen sulfide are likely to cause odor-related problems in geothermal resources areas, assuming that no pollution controls are employed. For individuals living within an 80 km radius of the geothermal resources, chronic exposure to particulate sulfate could result in between 0 to 95 premature deaths per 10/sup 18/ J of electricity generated. The mean population risk of leukemia from the inhalation of benzene was calculated to be 3 x 10/sup -2/ cases per 10/sup 18/ J. Exposure to elemental mercury in the atmosphere could produce between 0 and 8.2 cases of tremors per 10/sup 18/ J of electricity. Inhalation of radon and its short-lived daughters poses a mean population risk of 4.2 x 10/sup -1/ lung cancers per 10/sup 18/ J. Analysis of skin cancer risk from the ingestion of surface water contaminated with geothermally derived arsenic …

Eleven hours after execution of the Riola Event (at 0826 PDT on 25 September 1980) in hole U2eq of the Nevada Test Site (NTS), a release of radioactivity began. When the seepage stopped at about noon the following day, up to some 3200 Ci of activity had been dispersed by light variable winds. On 26 September, examination of the geophone records showed six hours of low-level, but fairly continuous, activity before the release. Electrical measurements indicated that most cables were still intact to a depth below the stemming platform. A survey of the ground zero area showed that the seepage came through cracks between the surface conductor and the pad, through cracks in the pad, and through a crack adjacent to the pad around the mousehole (a small hole adjacent to the emplacement hole). To preclude undue radiation exposure or injury from a surprise subsidence, safety measures were instituted. Tritium seepage was suffucient to postpone site activities until a box and pipeline were emplaced to contain and remove the gas. Radiation release modeling and calculations were generally consistent with observations. Plug-hole interaction calculations showed that the alluvium near the bottom of the plug may have been overstressed and that improvements …

A computer code, called GAMIDENT, was written to help identify isotopes by their gamma-ray emissions and thus to assist in the non-destructive assay of unknown materials. The program searches a file (called GAMIN) of gamma-ray spectra, from both radioactive decays and neutron captures, for matches with observed photon energies. This report describes the search procedure used, outlines the use of the code, and gives examples. The code is designed for operation at the Lawrence Livermore Laboratory on a CDC-7600 computer. It is written in standard Fortran (ANSI) as much as possible, but it contains some LRLTRAN instructions required to make use of the Livermore Timesharing System. The code uses about 30,000 words of SCM and about 550,000 words of LCM. Typical problems run in less than 30 seconds. The source program and the data file are available on request.

The ENDF/B-V Evaluated Neutron Data File has been tested for validity by comparing calculated and experimental values of k/sub eff/ for 66 critical assemblies and emission neutron spectra for 20 spheres that were pulsed with 14-MeV neutrons. 20 figures, 7 tables.

Described is a general approach to the development of computer programs capable of designing image-forming optical systems without human intervention and of improving their performance with repeated attempts. The approach utilizes two ideas: (1) interpretation of technical design as a mapping in the configuration space of technical characteristics and (2) development of an intelligent routine that recognizes global optima. Examples of lens systems designed and used in the development of the general approach are presented, current status of the project is summarized, and plans for the future efforts are indicated.

The results of the analyses as well as a plan for the development of the geothermal resource are described. Site characteristics pertinent to the geothermal development are described. These characteristics include physiography, demography, economy, and goals and ojectives of the citizens as they would relate to geothermal development. The geothermal resource is described. The reservoir is characterized on the basis of available information. The probable drilling depth to the reservoir, anticipated water production rates, water quality, and resource temperatures ae indicated. Uses of the energy that seem appropriate to the situation both now and in the near future at Hawthorne are described. The amounts and types of energy currently consumed by end users are estimated. Using this data base, conceptual engineering designs and cost estimates for three alternative district heating systems are presented. In addition, the results of a life cycle cost analysis for these alternatives are discussed. The essential institutional requirements for geothermal energy development, including the financial, environmental, and legal and regulatory aspects are discussed. The various steps that are necessary to accomplish the construction of the geothermal district heating system at Hawthorne are described. A time-line chart shows the tasks, the time estimated to be required for …

This paper discusses hybridization of modified Stellarator-like transform windings (T-windings) with a Spheromak or Field-Reversed-Mirror configuration. This configuration, Stellarmak, retains the important topological advantage of the Spheromak or FRM of having no plasma linking conductors or blankets. The T-windings provide rotational transformation in toroidal angle of the outer poloidal field lines, in effect creating a reversed B/sub Toroidal/ Spheromak or adding average B/sub T/ to the FRM producing higher shear, increased limiting ..beta.., and possibly greater stability to kinks and tilt. The presence of field ripple in the toroidal direction may be sufficient to inhibit cancellation of directed ion current by electron drag to allow steady state operation with the toroidal as well as poloidal current maintained by neutral beams.

A 1-MW geothermal wellhead power plant incorporating a Lysholm or helical screw expander (HSE) was field tested between 1980 and 1983 by Mexico, Italy, and New Zealand with technical assistance from the United States. The objectives were to provide data on the reliability and performance of the HSE and to assess the costs and benefits of its use. The range of conditions under which the HSE was tested included loads up to 933 kW, mass flowrates of 14,600 to 395, 000 lbs/hr, inlet pressures of 64 to 220 psia, inlet qualities of 0 to 100%, exhaust pressures of 3.1 to 40 psia, total dissolved solids up to 310,000 ppM, and noncondensible gases up to 38% of the vapor mass flow. Typical machine efficiencies of 40 to 50% were calculated. For most operations efficiency increased approximately logarithmically with shaft power, while inlet quality and rotor speed had only small effects. The HSE was designed with oversized internal clearances in the expectation that adherent scale would form during operation. Improvements in machine efficiency of 3.5 to 4 percentage points were observed over some test periods with some scale deposition. A comparison with a 1-MW back-pressure turbine showed that the HSE can compete …

Geophysical exploration for engineering purposes is conducted to decrease the risk in encountering site uncertainties in construction of underground facilities. Current responsibilities, opportunities and challenges for those with geophysical expertise are defined. These include: replacing the squiggly line format, developing verification sites for method evaluations, applying knowledge engineering and assuming responsibility for crucial national problems involving rock mechanics expertise.

This report describes the results obtained by using data generated at Lawrence Livermore Laboratory's MFS Test Facility as input to the filtering and control programs developed at LBL. Graphs that illustrate the source models/filters performance, as well as some conditioning history are included. Probable sources of error are discussed.

Controlled fusion, pursued by investigators in both the magnetic and inertial confinement research programs, continues to be a strong candidate as an intrinsically safe and virtually inexhaustible long-term energy source. We describe the status of magnetic and inertial confinement fusion in terms of the accomplishments made by the research programs for each concept. The improvement in plasma parameters (most frequently discussed in terms of the Tn tau product of ion temperature, T, density, n, and confinement time, tau) can be linked with the construction and operation of experimental facilities. The scientific progress exhibited by larger scale fusion experiments within the US, such as Princeton Plasma Physics Laboratory's Fusion Test Reactor for magnetic studies and Lawrence Livermore National Laboratory's Nova laser for inertial studies, has been optimized by the theoretical advances in plasma and computational physics. Both TFTR and Nova have exhibited ion temperatures in excess of 10 keV at confinement parameters of n tau near 10/sup 13/ cm/sup -3/ . sec. At slightly lower temperatures (near a few keV), the value of n tau has exceeded 10/sup 14/ cm/sup -3/ . sec in both devices. Near-term development plans in fusion research include experiments within the US, Europe, and Japan to …

Sources of parameter data for BIODOSE simulations are documented. These simulations were used in bedded salt repository analysis. Water system parameters are presented for a southwestern river system (patterned after the lower Colorado River). Nuclide-specific parameters are given also.

This user's manual describes the BIOsphere Transport and DOSE program (BIODOSE) prepared for, and delivered to, Lawrence Livermore Laboratory (LLL) by the Analytic Sciences Corporation (TASC). BIODOSE simulates the transport of radionuclides in surface water systems and the resulting concentration of nuclides in the food chain. It includes the prediction of human dosage risks for individuals and for populations resulting from release of radionuclides into surface water or well water. The BIODOSE program was designed for easy use, including standard defaults and a flexible input scheme.

A new concept is proposed for pumped limiter designs that allows more flexibility and therefore better control of the edge plasma and its recycling at the limiter than previous designs.