This report presents the results of various experiments carried out at the Gottingen Aerodynamic Institute. These include: experiments with Joukowski wing profiles; experiments on an airplane model with a built-in motor and functioning propeller; and the rotating cylinder (Magnus Effect).

The problem before us is to determine the total stresses in an axially loaded column of any degree of restraint which is also subject to transverse bending both from a uniformly distributed load and from concentrated loads. The solution of this problem is of special importance in the design of aircraft which consist of slender columns" (p. 1).

The following experiments on the air flow behind bodies were made for the purpose of assisting in the explanation of the phenomena connected with air resistance. The first two series of experiments dealt with the phenomena behind a cylinder. The third series of experiments was carried out behind a streamlined strut.

Report discussing before proceeding to discuss the preparation of dope solutions, it will be necessary to consider some of the essential properties which should be possessed of a dope film, deposited in and on the surface of an aero fabric. The first is that it should tighten the material and second it should withstand weathering.

Ballistics is a science hundreds of years old and this report is an attempt to show how these older principles can be used in the newer science of aerodynamics.

The results of tests to determine the effect of wheel brakes on the landing run of an airplane under conditions of load and at various wind velocities are presented.

In order to experimentally study the conditions leading to ice formation on aircraft surfaces, an aircraft was equipped with small auxiliary surfaces and aerodynamic shapes similar to struts, wires, Pitot heads, etc. This airplane was flown at an altitude where a temperature of 32 F was encountered, at such times as cloud formations could be found at the coincident altitude. Here it was discovered that ice formed rapidly in regard to quantity, character, shape, and rapidity of formation.

This investigation was conducted by the National Advisory Committee for Aeronautics at Langley Field, Va., at the request of the Army Air Corps, for the purpose of comparing the full scale lift and drag characteristics of an airplane equipped with several sets of wings of commonly used airfoil sections. A Sperry Messenger Airplane with wings of R.A.F.-15, U.S.A.-5, U.S.A.-27, and Gottingen 387 airfoil sections was flown and the lift and drag characteristics of the airplane with each set of wings were determined by means of glide tests. The results are presented in tabular and curve form.

Report issued by the U.S. Bureau of Mines on the possibilities of applying oxygenated air during metallurgical and allied processes. The methods and results of applying oxygenated air to these processes are presented. This report includes tables and graphs.

Given here is the most recent research on skin frictional resistance of plane surfaces in air that was conducted by Dr. Wieselsberger under the direction of Dr. Prandtl of Gottingen University. In all, 16 models were tested. These were divided into four groups, as follows: 1) cloth, in the original condition; 2) cloth, with the nap singed off; 3) cloth, with three coats of dope; and 4) cloth, with six coats of dope. Each group consisted of four models of uniform width, 1 meter, and of lengths of 0.5, 1.0, 1.5, and 2.0 meters.

The need for a device to measure flight resistance, engine and propeller power, and efficiency during flight grew in proportion to the demand for increased flying capacity in military types of aircraft. Here, a dynamometer hub was inserted between the engine and the propeller. Taken as a whole, the tests that were conducted show that though the dynamometer is a sensitive instrument liable to numerous derangements, it is undeniably useful even in its present form, when handled with care and skill.

"In this article, the phenomena of the upward component in the case of flat surfaces will be referred to as the "Lilienthal effect." The Lilienthal effect will be distinguished from the Knoller-Betz effect which is explained by means of vertical wind oscillations, at the basis of which, however, there lie air motions which the Lilienthal effect could not produce. It will be shown that the same cause, which can produce the Lilienthal effect on flat airfoils, considerably strengthens the thrust due to the Knoller-Betz effect" (p. 1).

"The present paper treats less of the effect of the union (of spars and ribs, namely, the reduction of the bending moment at the fixed ends of the spars) than of its influence on the torsional rigidity of the wing. The calculations are carried out for a two-spar wing of constant cross section, in which the ribs are replaced by a continuous member of constant rigidity" (p. 1).

"The crisis which troubles the world market for liquid fuel in general and for carburants in particular is doubtless one of the most serious ever experienced by modern industry. It is a national crisis of economic and political independence for countries like Italy and France. The solutions suggested for meeting the lack of liquid fuel may be summed up under two general headings: the economical use of the petroleum now available; creation of petroleum substitutes from natural sources within the country" (p. 1).

Report issued by the U.S. Bureau of Mines discussing studies conducted on the development of the oil-shale industry from a historical, technical, and economic perspective. Results of the studies are presented. This report includes tables, illustrations, and photographs.

Report discussing 1) the pertinent information available on what electric furnaces can do to assist prospective users in selecting a furnace that fits their requirements and 2) the gradual evolution of the present commercial types of electric furnaces. Also discusses some of the fundamental principles in the design, construction, and operation of electric furnaces.

Given here is a brief history of the design and construction of the "Spirit of St. Lewis", the airplane that Charles Lindbergh flew solo across the Atlantic. Although the plan was to modify a standard model Ryan M-2, it was quickly determined that modification was less practical than redesign. Given here are the general dimensions, specifications, weight characteristics, and man hours required to build the aircraft.

This report presents the results of an investigation of the rolling and yawing moments due to ailerons of various chords and spans on two airfoils having the Clark Y and U. S. A. 27 wing sections. Some attention is devoted to a study of the effect of scale on rolling and yawing moments and to the effect of slightly rounding the wing tips. The results apply to level flight with the wing chord set at an angle of attack of +4 degrees and to conditions of zero pitch, zero yaw, and zero roll of the airplane. It is planned later to extend the investigation to other attitudes for monoplane and biplane combinations. The work was conducted in the 10 foot wind tunnel of the Bureau of Standards on models of 60-inch span and 10-inch chord. (author).

"The various speeds of an airplane can only be measured in horizontal flight, since there are no means for measuring the angle of ascent or descent. The measurements must be corrected for the density of the air. This is obtained by simultaneous pressure and temperature measurements during flight" (p. 1).

"The air is known to be charged with electricity (chiefly positive) with reference to the earth, so that its potential increases with the altitude and the difference in potential between two points in the same vertical line, divided by the distance between them, gives a value called the "potential gradient," which may vary greatly with the altitude, the nature of the ground and the atmospheric conditions" (p. 1).

Report presenting the theory of the ideal propeller, which is important for solving the problem of the action of propellers. Several different theories of propeller action are described and compared to determine which ones seem to be the most accurate.

Since 1922 the further development of the glider has consisted of a very gradual and arduous improvement in regards to air resistance, weight, strength and maneuverability. This report provides an in-depth examination of these improvements.

Brief summary of the habitat, habits, food and economic status, measurements, subfamilies, and subgenera of genera Sorex and Microsorex.

"This investigation on the relative wear of several bearing materials lubricated by gasoline was conducted at the Langley Memorial Aeronautical Laboratory, as part of a general research on fuel injection engines for aircraft. The specific purpose of the work was to find a durable bearing material for gear pumps to be used for the delivery of gasoline and diesel engine fuel oil at moderate pressures to the high pressure pumps of fuel injection engines" (p. 1).