None

From Introduction: "The present report describes the condition of all of the porcelain enamels after exposure for 3 yr."

Report regarding an airborne gamma-radioactivity survey that took place in the 2,800 square mile area around the Los Angeles region in California. Topics include the types of bedrock noted in the area as well as their levels of radioactivity.

From Introduction: "In connection with the fuel investigations conducted by the Bureau of Mines much information has been accumulated as to the smoke abatement activities in various cities. The essential features of the information are presented in this report, which, it is believed, will be of public interest and benefit, especially to those communities that are just beginning organized effort to abate unnecessary smoke."

From Introduction: "This bulletin updates and summarizes research recovering tungsten from Searles Lake brines, the largest known single domestic tungsten deposit."

Report issued by the U.S. Bureau of Mines on secondary methods of oil-recovery in California oil fields. The main recovery method studied are of the pressure-maintenance type, such as air-injection. The report is divided into two parts, and includes maps and tables.

Report issued by the Bureau of Mines over titanium deposits found in Los Angeles County. Details of the geology, physical features, and history of the deposits are presented. This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over studies conducted on petroleum engineering and gas-injections in California. The results of the engineering study are presented. This report includes tables, maps, and illustrations.

Report issued by the U.S. Bureau of Mines discussing metallurgical and mineral fumes and dusts in Los Angeles County, California. Properties of dusts and fumes from different minerals are presented. This report includes tables, maps, illustrations, and photographs.

A phase II study has been initiated to investigate surfactant-assisted coal liquefaction, with the objective of quantifying the enhancement in liquid yields and product quality. This report covers the sixth quarter of work. The major accomplishments were (1) Completion of the distillation of the liquid product from coal liquefaction autoclave reactor runs with Illinois No. 6 coal at 400{degree}C, with and without surfactant and/or catalyst at pressures of 1700 psig, (2) Batch autoclave runs at 375 and 400{degree}C with 1 wt % lignin to Illinois No. 6 coal to further define the surfactant effect of sodium lignosulfonate, and (3) a preliminary economic evaluation of the application of the lignosulfonate surfactant in an industrial liquefaction process and a proposed conceptual plant design.

The vision for the future of the planetary exploration program includes the capability to deliver {open_quotes}constellations{close_quotes} or {open_quotes}fleets{close_quotes} of microspacecraft to a planetary destination. These fleets will act in a coordinated manner to gather science data from a variety of locations on or around the target body, thus providing detailed, global coverage without requiring development of a single large, complex and costly spacecraft. Such constellations of spacecraft, coupled with advanced information processing and visualization techniques and high-rate communications, could provide the basis for development of a {open_quotes}virtual{close_quotes} {open_quotes}presence{close_quotes} in the solar system. A goal could be the near real-time delivery of planetary images and video to a wide variety of users in the general public and the science community. This will be a major step in making the solar system accessible to the public and will help make solar system exploration a part of the human experience on Earth.

Concern over the future availability of high quality liquid fuels or use in furnaces and boilers prompted the U. S. Department of Energy (DOE) to consider alternate fuels as replacements for the high grade liquid fuels used in the 1970`s and 1980`s. Alternate fuels were defined to be combinations of a large percentage of viscous, low volatility fuels resulting from the low end of distillation mixed with a small percentage of relatively low viscosity, high volatility fuels yielded by the high end of distillation. The addition of high volatility fuels was meant to promote desirable characteristics to a fuel that would otherwise be difficult to atomize and burn and whose combustion would yield a high amount of pollutants. Several questions thus needed to be answered before alternate fuels became commercially viable. These questions were related to fuel atomization, evaporation, ignition, combustion and pollutant formation. This final report describes the results of the most significant studies on ignition and combustion of alternative fuels.

A search was made for improved TE materials that could have higher efficiency than state-of-the-art SiGe alloys used in Radioisotope Thermoelectric Generators. A new family of materials having the skutterudite structure was identified (cubic space group Im3, formula (Fe, Co, Ni)As{sub 3}). Properties of n-type IrSb{sub 3}, CoSb{sub 3}, and their solid solutions were investigated. Pt, Te, Tl, and In were used as dopants. The thermal conductivity was reduced by about 70% for the solid solutions vs the binary compounds. A maximum ZT of about 0.36 was measured on Co-rich solid solutions which is 160% improved over that of the binary compounds.

We have found that there is a limited range of solid solutions between the skutterudite compounds CoSb{sub 3} and RuSb{sub 2}Te (about 5% on each side). For the system (RuSb{sub 2}Te){sub x}(CoSb{sub 3}){sub 1-x}, preliminary results obtained on one n-type sample on the CoSb{sub 3}-rich side show that these alloys have good thermoelectric properties and a maximum ZT of about 0.89 was obtained at about 600 C. More experiments will be started to investigate the possibility of a broader range of miscibility in this system which would allow an even further decrease in the lattice thermal conductivity, resulting in better thermoelectric properties. IrSb{sub 3} and RuSb{sub 2}Te form a complete range of solid solutions. Hot-pressed samples in this system have shown p-type conductivity. The thermoelectric properties of these p-type alloys have been measured and results have shown that their potential for thermoelectric applications is limited mainly because of the relatively low Seebeck coefficient values for p-type materials. Efforts will be directed on preparing n-type samples of the same alloys by doping with various dopants such as Ni and Pd.

The study reported herein was conducted in 1944 at the Waterways Experiment Station for the Bureau of Yards and Docks, U. S. Navy Department. Its purpose was to determine the best of several plans proposed for protecting the piers and dry docks at the Naval Operating Base, Terminal Island, San Pedro, California, from the effects of wave and surge action.

None

Tubing and rods of the S.P. Pedro-Nepple No.1 well were pulled and the well was prepared for running of Schlumberger's Cased Hole Formation Resistivity Tool (CHFR) in selected intervals. The CHFR tool was successfully run and data was captured. The CHFR formation resistivity readings were compared to original open hole resistivity measurements. Separation between the original and CHFR resistivity curves indicate both swept and un-swept sand intervals. Both watered out sand intervals and those with higher remaining oil saturation have been identified. Due to the nature of these turbidite sands being stratigraphically continuous, both the swept and unswept layers have been correlated across to one of the four nearby offset shallow wells. As a result of the cased hole logging, one well was selected for a workover to recomplete and test suspected oil saturated shallow sand intervals. Well S.P. Pedro-Nepple No.2 was plugged back with cement excluding the previously existing production interval, squeeze cemented behind casing, selectively perforated in the shallower ''Bell'' zone and placed on production to develop potential new oil reserves and increase overall well productivity. Prior workover production averaged 3.0 BOPD for the previous six-months from the original ''Meyer'' completion interval. Post workover well production was increased …

This report analyzes research performed to test the Lovaas Model of Applied Behavior Analysis. This behavior modification technique uses prompting and reinforcement to help with children who have disabilities.

From abstract: The stratigraphic nomenclature of the central Santa Monica Mountains is revised to conform with present knowledge of the age, distribution, and stratigraphic relations of about 35 bedrock units. The revision is based on 1:12,000-scale mapping of the entire stratigraphic sequence and its facies, the position and stage assignment of abundant fossils, and contact relations.

From abstract: This report presents the theory and method of calculation used by MIX2, describes the input to the program, presents results of two test cases, and provides a program listing.

From abstract: The Santa Monica Mountains lie only a few miles northwest of the city of Los Angeles and comprise one of the prominent structural features that adjoin the Los Angeles Basin, one of the most prolific oil-producing districts of California. Even though the eastern part of these mountains may yield no oil, information concerning the rock types, structural character, and detailed geologic history of this area should be of value to petroleum geologists. The area described in this report, which lies between Topanga Canyon on the west and the Los Angeles River on the east, presents a section of varied rock types including coarsely crystalline plutonic rocks, basic and acidic intrusive and pyroclastic rocks, metamorphic slate and schist, and a wide assortment of sedimentary rocks.

The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing method of meeting energy requirements. Progress on the technical work of Phase I is reported. The following are summarized: requirements (energy price projection, atmospheric emission requirements, citrus juice quality constraints, economic evaluations); characterization (basic citrus processing operations, energy consumption and fruit processed vs time, identification and measurement of energy uses, energy balance for a typical citrus juice evaporator); and thermodynamic analysis (heat pump model, thermal evaporator, and co-generation model).

The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the first six months of 1992 on research activities associated with these two systems. (GHH)

The objective of the Vee-Trough/Vacuum Tube Collector (VTVTC) Project was to prove the usefulness of vee-trough concentrators in improving the efficiency and reducing the cost of collectors assembled from evacuated tube receivers. The VTVTC was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrator and the thermal performance of the evacuated tube receiver. A test bed was constructed to verify the mathematical analyses and compare reflectors made out of glass, Alzak and aluminized FEP Teflon. Tests were run at temperatures ranging from 95 to 180/sup 0/C during the months of April, May, June, July and August 1977. Vee-trough collector efficiencies of 35 to 40% were observed at an operating temperature of about 175/sup 0/C. Test results compared well with the calculated values. Test data covering a complete day are presented for selected dates throughout the test season. Predicted daily useful heat collection and efficiency values are presented for a year's duration at operation temperatures ranging from 65 to 230/sup 0/C. Estimated collector costs and resulting thermal energy costs are presented. Analytical and experimental results are discussed along with a complete economic evaulation. Recommendations for the continuation of the project are presented.