This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.

Article presents research that creates an automatic repetition counting system that is flexible enough to measure multiple distinct and repeating movements during physical therapy without being trained on the specific motion.

Article describes development of an ultrafine-grained magnesium alloy with an extraordinary strength and ductility combination, exceptional high specific strength, zero yield strength asymmetry and excellent high strain rate superplasticity.

This article outlines key advantages of additive friction stir deposition, e.g. rendering fully-dense material in the as-printed state with fine, equiaxed microstructures, identifies its niche engineering uses, and points out future research needs in process physics and materials innovation.

Article presents a new benchmark for natural language inference in which negation plays a critical role and shows that state-of-the-art transformers struggle making inference judgments with the new pairs.

Article proposes a novel Bayesian method, named BAM, for simultaneously partitioning Single Nucleotide Polymorphisms (SNPs) into Linkage Disequilibrium(LD)-blocks and detecting genome-wide multi-locus epistatic interactions that are associated with multiple diseases. Experimental results on the simulated datasets demonstrate that BAM is powerful and efficient.

This article designs a novel coded caching scheme that outperforms uncoded caching schemes that either use unicast transmissions or let each user recover all files in the library. It extends the scope of the authors’ past work that only considered the class of linear functions that operate element-wise over the files.

This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.

Article characterizing an assortment of photopolymers and stereolithography processes to produce 3D-printed molds and polydimethylsiloxane (PDMS) castings of micromixing devices. The study shows that 3D-printed soft tooling can provide other benefits such as multiple cross-sections and other potential layouts on a single mold.

Article providing an overview of the special issue titled Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities. The published papers in this special issue aim to report on the current state of research in complex concentrated alloys (CCAs) as well as compelling future opportunities in wide ranging applications.

Article examining foams made from polylactic acid (PLA) and micro cellulose fibrils (MCF) to address the need for bio-resourced foams for the building industry.

This article develops a three-dimensional thermokinetic model based on the finite element method to correlate with the microstructure evolved in additively manufactured Ti6Al4V alloy.

Article using in-situ neutron diffraction to correlate SF strengthening to work hardening behavior in a low SFE Fe40Mn20Cr15Co20Si5 (at%) high entropy alloy, SFE ~ 6.31 mJ m−2. Cooperative activation of multiple mechanisms was indicated by increases in SF strengthening and γ-f.c.c. → ε-h.c.p. transformation leading to a simultaneous increase in strength and ductility. The present study demonstrates the application of in-situ, neutron or X-ray, diffraction techniques to correlating SF strengthening to work hardening.

Article compares in-plane (IP) and out-of-plane (OOP) vacancy migration mechanisms in binary Mg–X (Ca, Y, and Gd) and ternary Mg–X (Ca, Y, and Gd)–Zn alloys using density functional theory based first principles computations.

This article aims to generate all theorems of a given size in the implicational fragment of propositional intuitionistic linear logic. It was presented at the 36th International Conference on Logic Programming (ICLP).

Article addresses the processing of negation in Spanish by presenting a machine learning system that processes negation in Spanish and providing a qualitative error analysis aimed at understanding the limitations of the system and showing which negation cues and scopes are straightforward to predict automatically, and which ones are challenging.

Article presents research determining event outcomes in social media.

Article explores degradation of Portland concrete and finds that the combination of fly ash with polymers provides significantly improved properties.

The article reports on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation, particularly Al₀.₇CoCrFeNi high-entropy alloy (HEA). A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1₂ phase did not delay the formation of adiabatic shear bands (ASB) or affect the ASB width significantly, however, the deformed region around ASB, consisting of high density of twins in fcc phase, was reduced from 80 µm to 20 µm in the stronger precipitation strengthened condition.

An introduction to a series of research articles submitted on the topic of "Catalysts for Clean Energy Conversion and Storage".

Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.

Article investigating a non-conductive sensor textile as a viable solution for corrosion in underground and submerged steel pipes. The results offer a new option for sub-surface corrosion sensing using low cost, easily fabricated sensor textiles.

Article reports a novel multi-phase microstructure in a HEA/CCA similar to the microstructure observed in dual-phase stainless steel.

Article reviews the current techniques of low-light image enhancement.