Article states that microneedles are highly sought after for medicinal and cosmetic applications. However, the current manufacturing process for microneedles remains complicated, hindering its applicability to a broader variety of applications. This experimental study enables the shapes and mechanical properties of the microneedles to be predicted in advance for mass production and wide practical use for biomedical or cosmetic applications.

Article asserts that the foot is a vital organ, as it stabilizes the impact forces between the human skeletal system and the ground. The authors present an instep girth measurement algorithm, and they used a pixel per metric algorithm for measurement; these algorithms were accordingly integrated with the application.

Article states that thiol-ene/acrylate shape memory polymers (SMPs) have sufficient stiffness for facile insertion and precision placement and soften after exposure to physiological conditions to reduce the mechanical mismatch with body tissue; as a result, they have demonstrated excellent potential as substrates for various flexible bioelectronic devices, such as cochlear implants, nerve cuffs, cortical probes, plexus blankets, and spinal cord stimulators. Here, the authors report a new strategy for designing SMPs with enhanced shape recovery properties and lower moduli than previously reported SMPs under physiological conditions without sacrificing stiffness at room temperature by introducing a hydrophilic monomer.

Data management plan for the grant, "Collaborative Research: CyberTraining: Pilot: Research Workforce Development for Deep Learning Systems in Advanced GPU Cyberinfrastructure." This project aims to develop a novel set of interactive training materials, including hands-on lecture modules, invited research talks from renowned researchers, and an interdisciplinary collaborative project in an intensive workshop, integrating a wide variety of advanced and inter-connected techniques employed by research workforce for deep learning (DL) systems in advanced GPU cyberinfrastructure (CI). Specifically, this project focuses on training seniors, graduate students, and researchers on how advanced GPU CI can be efficiently utilized and improved to enable high-performance DL systems for data-intensive DL applications in geoscience (GS) and computer science and engineering (CSE) research. The goal is to foster future CI users and contributors to adopt, develop, and improve advanced GPU CI for DL systems in their research.

Article describes how additive friction stir deposition has been proposed as a disruptive manufacturing process; involving complex thermo-mechanical mechanisms during multilayer material deposition. The primary motivation for development of the model was to seek an understanding of thermo-mechanical mechanisms and their impact on microstructural evolution during additive friction stir deposition.

Article describes how biomedical devices such as pumping/mixing fluids, cell-culturing, and drug delivery often use different actuation methods. In regard to magnetic actuation, membranes with a local distribution of magnetic particles are investigated and compared to membranes with randomly distributed magnetic particles, which in turn may enhance the actuation performance for certain applications.

Article describes how plasmons associated with zero-dimensional (0D) metal nanoparticles and their synergistic interactions with excitons in two-dimensional (2D) semiconductors offer opportunities for remarkable spectral tunability not otherwise evident in the pristine parent materials, which necessitates an in-depth study elucidating the nature of the plasmonic and excitonic interactions, jointly referred to as plexcitons in order to understand the foundational aspects of the light–matter interactions in hybrid 0D–2D systems. The authors examine the plexcitonic interactions of van der Waals (vdWs) hybrid structures composed of 2D WSe2 and 0D Au nanoparticles (Au-NPs) in their spherical (Au-Sp) and bi-pyramidical (Au-BP) architectures, which demonstrates that geometry-mediated response of the AuNPs provides another degree of freedom to modulate the carrier photodynamics in WSe₂.

Authors discuss their use of a distributed and decentralized architecture to store the statistics, perform double hashing, and implement access control through smart contracts to forecast groundwater availability. Their work demonstrates a modern and innovative approach combining Distributed Data Storage and Blockchain technologies to overcome traditional data sharing, and centralized storage, while addressing blockchain limitations.

Article focuses on the fact that there are no clear mechanisms for the interaction of electrode-induced absorber degradation pathways. Furthermore, the authors hypothesize that the formation of AgI in the PSCs, leads to corrosion of the perovskite absorber, as opposed to the benign AuI when Au electrodes are used in the solar cell stack.

Article discusses how protein based adhesive is limited by poor mechanical properties and water resistance. This simple and green preparation method provided a new strategy for the production of high-performance, multifunctional and economically effective SM based adhesive.

Article discusses how with the wider adoption of edge computing services, intelligent edge devices, and high-speed V2X communication, compute-intensive tasks for autonomous vehicles, such as object detection using camera, LiDAR, and/or radar data, can be partially offloaded to road-side edge servers. The authors aim to address the privacy problem by protecting both vehicles' sensor data and the detection results.

Article discusses the large quantities of farm and meat products that rot and are wasted if correct actions are not taken leading to serious health concerns if consumed. Because there is no proper system for tracking and communicating the status of goods to consumers, a right which according to the authors should be a given, they propose a method of increased communication using Corda private blockchain.

Article talks about how while the idea of frictionless surfaces and the associated implications of vanishing energy losses during mechanical motion have been part of science fiction culture, scientists in the real world work toward realizing this ambitious goal that was once thought to be unattainable. The overarching goal of the research topic titled “Superlubricity Across the Scales” is to provide a snapshot of the latest developments in this rapidly accelerating field of research.

Article proposes a gap waveguide (GW)-based 4 × 4 dual-band, dual-circularly polarized antenna array. The combination of dual-band, dual-circularly polarized capability, high gain, high efficiency, lightweight, low cost and compact size renders the proposed design a potential candidate for commercial millimeter wave communication applications.

Authors of the article created an overall assessment metric using a deep learning autoencoder to directly compare clinical outcomes in a comparison of lower limb amputees using two different prosthetic devices—a mechanical knee and a microprocessor-controlled knee. The proposed methods were used on data collected from ten participants with a dysvascular transfemoral amputation recruited for a prosthetics research study.

Article states that predicting the chemical durability of glass materials is important for various applications from daily life such as cell phone screens and kitchenware to advanced technologies such as nuclear waste disposal and biomedicine. In this work, we explored the prediction of the initial glass dissolution rates using structural features from molecular dynamics (MD) simulations for a series of glass compositions (total 28), including ZrO2- and V2O5-containing boroaluminosilicate, borosilicate, and aluminosilicate glasses.

Article suggests that common standards for recording, detection, and reporting for intracranial recordings in humans that suggest their role in episodic and semantic memory does not exist. Authors of the article outline the methodological challenges involved in detecting ripple events and offer practical recommendations to improve separation from other high-frequency oscillations, and argue that shared experimental, detection, and reporting standards will provide a solid foundation for future translational discovery.

Article describes the compositional dependence and influence of relaxation state on the deformation behavior of a Pt–Pd-based bulk metallic glasses model system was investigated, where platinum is systematically replaced by topologically equivalent palladium atoms. Based on total scattering experiments with synchrotron X-ray radiation, a correlation between the increase in stiffer 3-atom cluster connections and reduction in strain-rate sensitivity, as a measure of ductility, with Pd content and thermal history is suggested.

Article describes hybrid additive manufacturing processes involve the use of different manufacturing techniques to fabricate net shape or near-net shape parts, with enhanced capabilities of heat dissipation, such as those needed in conformal molding, or requiring internal cooling systems, such as, for example, those seen in turbine blades, and for developing other components demanding free form fabrication methods. The combination of these AM processes with material removal processes, such as machining, is the core of the hybrid additive manufacturing concept, together with the full coupling of these processes in an integrated fashion.

Article states that the AlCoCrFeNi2.1 eutectic high entropy alloy is of great interest due to its unique mechanical properties combining both high strength and plasticity. This work establishes the potential for using arc-based welding for joining eutectic high entropy alloys.

Article discusses how understanding gas flow behavior is crucial in the ability of materials to sense toxic gasses for environmental, industrial, safety, agriculture, and related applications. In their study, the authors measure the electrical transport characteristics of ink jet printed graphene to incoming gas flow, specifically to N2 and CO2. This work serves as a prototypical platform to study the device characteristics of solution processed graphene and other 2D materials for more exotic gases in the future for gas sensing applications.

Article discusses findings on two distinct classes of van der Waals solids, that based on in-organic transition metal dichalcogenides and the other based on a hybrid mixed organic-inorganic composition of 2D perovskites, specifically organo-halides (CH3(CH2)3NH3)2(CH3NH3)n-1PbnI3n+1.

Article discusses a study on synthesizing 0D-2D vdW heterostructure by spin coating C60 molecules on halide-assisted-low-pressure chemical-vapor-deposition (HA-LPCVD) produced monolayer WSe2 flakes. The study reveals that WSe2-C60 hybrid system is an appealing choice for next generation optical sensing devices.

Article discusses how semiconducting two-dimensional transition-metal dichalcogenides (TMDs) have garnered a great deal of interest owing to their large surface-to-volume ratios compared to traditional three-dimensional (3D) semiconductors, and focuses on a specific TMD; tungsten diselenide (WSe₂). In their study, the authors demonstrate the halide-assisted low-pressure chemical vapor deposition (HA-LPCVD) of high crystalline-quality, monolayer WSe₂.