This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.

Article investigates the strength-ductility synergy of high-entropy alloys (HEAs).

Article on a mobility-based CAC algorithm for arbitrary call-arrival rates in CDMA cellular systems.

This article discusses the effects of interference on capacity in multi-cell CDMA networks.

Article describes study which sought to evaluate methods for activity recognition for toddlers.

Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.

Article discussing a resource efficient and scalable approach to routing in large communication networks.

Article says that plasmonic and phase transition has been blended to gain the infrared radiative switching which is tunable with temperature or voltage supply. This is applied via vanadium dioxide, tungsten trioxide, and molybdenum trioxide as transition metal oxides (TMO), the authors state that the work expands the usage of transition metal oxides in infrared region with larger contrast.

Describes the development of a strong mold-resistant adhesive by incorporating soybean meal and blood meal.

This article demonstrates that tribochemical reactions occur even in dry conditions when hydrogenated diamond-like carbon (H-DLC) surface is slid against two-dimensional (2D) molybdenum disulfide along with nanodiamonds in dry nitrogen atmosphere.

This article is a study where the authors integrated the multi-omics datasets such as copy number aberration, DNA methylation, gene and microRNA expression to identify the signature microRNA-gene associations from frequently aberrated DNA regions across pan-cancer utilizing a LASSO-based regression approach.

This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.

In this article, different composite materials have been developed and characterized for different applications in the health science field and as optoelectromechanical sensors.

This article proposes a novel preconditioned and accelerated Gauss–Siedel algorithm referred to as Symmetric Successive Overrelaxation Preconditioned Gauss-Seidel (SSORGS) to address the signal detection challenges associated with massive MIMO technology.

This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, respectively, as compared with that of pure SPA.

Article describes how, while additive manufacturing (AM) of single-phase solid solution based high entropy alloys (HEAs) has attracted a lot of recent attention, such processing of precipitation strengthenable multi-phase HEAs has not been actively investigated. This becomes important since AM processing results in each layer experiencing rapid solidification followed by multiple heating-cooling cycles, mimicking in situ heat treatments, potentially influencing the phase evolution.

This article is motivated by the promise of emerging nanocomposites and reports for the first time the adsorption performance of an aluminum-based MOF (MIL-53(Al)) and GO nanocomposite for Pb(II) removal from aqueous solutions.

Article discusses a novel eutectoid nano-lamellar (FCC + L12)/(BCC + B2) microstructure that has been discovered in a relatively simple Al0.3CoFeNi high entropy alloy (HEA) or complex concentrated alloy (CCA).

Paper discusses the results of studying the structural and thermophysical properties of chitosan + starch + poly(ethylene terephthalate) (Ch + S + PET) fibers developed via electrospinning.

This article summarizes the results of an investigation on the effect of the colemanite on physical and mechanical properties of concrete using colemanite as replacement aggregate.

This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.

This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

Article describes the response of [100]-oriented single-crystal face-centered-cubic Al0.1CoCrFeNi and Al0.3CoCrFeNi high-entropy alloy (HEA) microcrystals tested from 293 to 573 K by means of in situ micro-compression.