This article focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.

This article explores single-layer tungsten disulfides (WS₂) because of their unique tunable bandgap. The authors report the scalable synthesis of uniform single-layer WS2 film by a two-step chemical vapor deposition (CVD) method followed by a laser thinning process.

The article focuses on a study that widens the toolbox to manufacture HEAs with exceptional corrosion resistance by additive manufacturing. CoCrFeMnNi high entropy alloys (HEAs) were additively manufactured (AM) by laser powder bed fusion and their corrosion resistance in 3.5 wt% NaCl solution was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests. A systematic study of AM CoCrFeMnNi HEAs’ porosity under a wide range of laser processing parameters was conducted and a processing map was constructed to identify the optimal laser processing window for CoCrFeMnNi HEAs.

Paper describes study evaluating incipient plasticity in multi-principal element alloys, CoCrNi, CoCrFeMnNi, and Al0.1CoCrFeNi by nano-indentation and compared with pure Ni.

Article reviewing several several flexible and stretchable materials used as substrate, stretchable electrical conduits and encapsulation, design modifications for stretchability, fabrication techniques, methods of signal transmission and monitoring, and the power sources for these stretchable bioelectronics. Ultimately, these bioelectronic devices can be used for wide range of applications from skin bioelectronics and biosensing devices, to neural implants for diagnostic or therapeutic purposes.

This article reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Such a trend is attributed to the ordering mediated nano-clustering in Al containing HEA/CCAs.

Article proposes a two-stage training dense point cloud generation network.

This article studies the problem of comparing the similarity and dissimilarity between two distinct vehicular trajectories by proposing an adjacency-based metric. This approach has a broad application in building truthfulness by comparing the similarity between two vehicles and evaluating the dissimilarity between two distinct paths in hazardous materials transportation.

This article presents a study that aims to understand the fundamental aspects of the laser-bone interaction in three-dimensional laser machining of the bone through an integrated experimental-computational approach.

Article discussing a methodological proposal for the quality control of precipitation data.

Patent relating to a method for removing contaminants on a substrate.

Patent relating to an anti-fretting wear coating for substrates.

This article describes the design of a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures.

This article presents a strong and ductile non-equiatomic high-entropy alloy obtained after friction stir processing.

Article describes how processes including hot compression, cold compression and subsequent annealing on the structures and properties are investigated and compared. They found that applying pressure up to 10 GPa at the glass transition temperature led to permanent densifications and a dramatic increase of elastic moduli by 90%, while thermal annealing reversed the increase and applying pressure at ambient temperature did not increase the modulus.

This article examines the chemical structures of biodegradable films created out of soy protein isolate (SPI), sodium dodecylbenzenesulfonate (SDBS) and pentaerythritol glycidyl ether (PEGE). The thermal stabilities of the films were also examined by means of the thermo-gravimetric analysis.

Article is a study investigating how to obtain the natural frequency of functionally graded porous beams simply supported on an elastic substrate in thermal surroundings by the theory of third-order shear deformation. This article is part of the special issue titled Dynamic Analysis and Vibration Control of Mechanical Structures Coupled with Rotational Systems.

Article asserts that while techniques that allow one to control the arrangement of cells and direct contact between different cell types have been developed that expand upon simple co-culture methods, specific control over heterojunctions that form between cells is not easily accomplished with current methods, such as 3D cell-printing. In this article, DNA-mediated cell interactions are combined with cell-compatible photolithographic approaches to control cell assembly.

Article describes how, amorphous magnesium alloy, especially Mg-Zn-Ca series, has been receiving continuous attention in biomedical field, because of its favorable corrosion resistance, suitable modulus and biocompatibility. In this work, laser powder bed fusing with unique characteristics of rapid solidification and layer-by-layer fashion was used to fabricate bulk Mg-Zn-Ca and Mg-Zn-Ca-Y amorphous parts.