Article studying material response under dynamic short duration-high temperature oxidation.

Data management plan for the grant "Modulating 3D Cellular Connectivity Via Spatially-Controlled Programmable Bonding." This project seeks to demonstrate proof-of-concept for technology that allows one to systematically place cells on substrates to create complex 3D assemblies with precise control over individual cellular interactions. The technology generated within this proposal will open new avenues for studying multicellular communication pathways, stem cell differentiation, and understanding developmental processes. Spatially-defined cell-cell communication plays a critical role in numerous disease and developmental processes that include osteoarthritic degeneration, cancer metastasis, and organ regeneration.

Data management plan for the grant "Process and Materials Development for Additive Manufacturing (AM) of Tungsten-Based Alloys with Superior High Temperature Performance and Good Room Temperature Ductility." Research on CALPHAD simulations will be conducted to optimize the chemical composition of tungsten based alloys towards 3D printability while boosting mechanical performance through solid solution and dispersion strengthening. This will followed by powder prototyping to validate the simulation results experimentally and to finalize the chemical composition of interest. Process parameter optimization and post-process heat treatment design will help to achieve optimal low-to-high temperature mechanical properties. Mechanical testing and microstructural characterization will be performed to establish process-microstructure-property relationships.

Data management plan for the grant "CAREER: A Prosthetic Elbow with Network of Soft and Modular Thermo-Active Actuators for Mobility Impaired Patients." This NSF Faculty Early Career Development (CAREER) project will develop novel networks of flexible Peltier-based soft actuators designed for rehabilitation.

Data management plan for the grant "Collaborative Research: CCRI: Planning: A Multilayer Network (MLN) Community Infrastructure for Data,Interaction,Visualization, and softwarE(MLN-DIVE)." Research relating to creating a community infrastructure for researchers using multilayer networks (MLN). This project uses a formally established network decoupling approach to perform various aggregate analysis (community, centrality, substructure detection, etc.) using individual layers and composing them. The broader impact of this planning project is to provide meaningful and appropriate analysis tools that are grounded in theory to a broad range of applications from different domains. The focus is on facilitating the mainstream use of multilayer network analysis in data analysis, research and teaching.

Data management plan for research material for the grant "Multi-modal Surface Acoustic Wave Sensing System for Pressure and Temperature monitoring of Spent Fuel Canisters." This project is a collaboration of ​University of North Texas, Oak Ridge National Laboratory, and National Energy Technology Laboratory to develop a multi-modal wireless passive SAW (Surface Acoustic Wave) sensor array, which are deployed on the outside surface of stainless steel canisters used for nuclear waste, to monitor the strain of the canister and thus determine the inside pressure to ensure safety and security. In addition, the SAW strain sensor could also measure the surface temperature and potentially monitor helium gas leaks.​

Article applies Laser Shock Peening with (LSP) and without protective coating (LPwC) to sensitized AA5083 followed by electrochemical analysis.

Article providing a brief review about various approaches of continuous glucose measurement with noninvasive manner. This article covers the state-of-the-art glucose measurement methods and its control mechanism. The study of various consumer products have also been discussed along with the open challenges. This is the Accepted Manuscript version.

Data management plan for the grant, "REU Site: TaMaLe - Testing and Machine Learning for Context-Driven Systems: Research Experience for Undergraduates." TaMaLe (Testing and Machine Learning for Context-Driven Systems), a renewal Research Experience for Undergraduates (REU) Site at University of North Texas, engages 10 undergraduate students for 10 weeks with problems in the context-driven system domain. The students explore research problems to improve the reliability and security of context-driven systems. Context-driven systems, such as mobile apps, face constant streams of input from both users and context changes in their environments. Users interact with apps through touch and speech interfaces. These systems also respond to context events that occur in their environments such as changes to network connection, battery level, screen orientation, and more. The combined explosion of possible user events and context event sequences pose new challenges that require cost effective testing solutions. Students and mentors in this REU program work in small teams to develop and empirically evaluate new software testing techniques for context-driven systems using strategies such as reinforcement learning and combinatorial-based techniques.

Article investigates the strength-ductility synergy of high-entropy alloys (HEAs).

Data management plan for the grant "RINGS: Mobility-driven Spectrum-Agile Resilient mmWave Communication Links for Unmanned Aerial Vehicle Traffic Management in the Sky." As the unmanned aviation industry moves towards Advanced Air Mobility (AAM) services, air taxis and air ambulances are expected to become a reality in near future. Handling such a high volume of unmanned air traffic requires innovative solutions for enhanced situational awareness in the airspace. The US Federal Aviation Federal Aviation Administration envisions air tracks specifically reserved for AAM vehicles at altitudes ranging from 500 ft to 2000 ft. Air tracks cross one another at intersections and vehicles may need to share the airspace with other manned and unmanned aerial vehicles. This requires coordination among the vehicles especially during close encounters. Such a coordination requires highly reliable communication links which serve as a substitute for traffic signals on the roads. This proposal addresses this key knowledge gap by investigating strategies for establishing reliable and robust Vehicle-to-Vehicle (V2V) communication links to support AAM services. This project investigates spectrum-agile millimeter wave-based tunable beamforming strategies needed for establishing reliable and robust V2V communications links to support autonomous flight operations in air corridors along with the supporting radio frequency and mixed signal …

Data management plan for the grant, "Cancer Detection and Treatment Based on Low-Level Light Interaction with Biological Cells: Augmentation to Existing Human Performance Research Capabilities."

Data management plan for the grant, "EAGER: Experimental Methods and Measurements of Anomalous Properties of Supercritical Fluids and their Mixtures"

Data management plan for the grant, "Variable Conductor Radiator for CO2 Deposition in Deep Space Transit"

Data management plan for the grant, "In-Situ Monitoring for Quality Assurance and Machine Learning in Direct-Write Additive Manufacturing of 5G RF Electronic Ceramics." The principal near-term objective of the PI is to use in-situ monitoring to define the processing rules that determine the microstructure, macrostructure, and high-frequency dielectric response of electronic ceramic materials for advanced RF “grown” by laser-assisted direct-write AM. In-situ measurements will be correlated and validated with ex-situ characterization, and these data will iteratively guide synthesis and processing optimization. In parallel, the experimental measurements will be used as inputs for the physics-based process modeling. Predictions from the experimentally validated models will in turn: 1) guide synthesis and processing optimization and, 2) train and constrain ML. Thus, quality assurance is achieved.

Data management plan for the grant, "A Novel Hybrid-Mode Curved-shape SAW (CsSAW) Sensor For The In-Situ/RealTime Torque And Temperature Measurement of Rotor Shaft in Harsh Environments."

Data management plan for the grant, "Ultrawideband Near-Field Probe System for Antenna Research." The objective of this project is to acquire an ultrawideband near-field probe system to build a highly capable antenna measurement facility which will provide critical support for the research, development, and testing of new antenna designs and concepts at the University of North Texas (UNT). The requested near-field probe system will be integrated with existing hardware at UNT, including a vector network analyzer and an Albatross Projects shielded chamber, to complete the build for the measurement system that is capable of characterizing three-dimensional radiation patterns of antennas-under-test (AUT) over a wide frequency range of 0.65-18 GHz. The measurement facility will be used to not only support ongoing and future federally funded research of the principal investigators but also enhance undergraduate and graduate education and training in RF, microwave, and antenna engineering at UNT.

Data management plan for the grant, "The University of North Texas Industrial Assessment Center."

Data management plan for the grant "Collaborative Research: Microneedle‐mediated Adaptive Phototherapy (MAP) for Wound Healing."

Data management plan for the grant "Collaborative Research: Smart Stent for Post-Endovascular Aneurysm Repair." The overall objective of this proposal is to develop a Smart Stent for post-endovascular aneurysm repair (EVAR) surveillance that combines a flexible, hybrid, seamless, battery-less bioelectronic system with a deep-learning algorithm that offers an automated diagnosis of complications such as endoleak.

Data management plan for the grant, "Development of Physics-Informed Mathematical Models for Ship Extreme Responses in Ocean Waves."

Data management plan for the grant, "Solid-State Additive Manufacturing of Durable Aluminum-Cerium Alloys for High-Temperature Aerospace Structural Applications."

Data management plan for the grant, "Collaborative Research: CyberTraining: Pilot: Research Workforce Development for Deep Learning Systems in Advanced GPU Cyberinfrastructure." This project aims to develop a novel set of interactive training materials, including hands-on lecture modules, invited research talks from renowned researchers, and an interdisciplinary collaborative project in an intensive workshop, integrating a wide variety of advanced and inter-connected techniques employed by research workforce for deep learning (DL) systems in advanced GPU cyberinfrastructure (CI). Specifically, this project focuses on training seniors, graduate students, and researchers on how advanced GPU CI can be efficiently utilized and improved to enable high-performance DL systems for data-intensive DL applications in geoscience (GS) and computer science and engineering (CSE) research. The goal is to foster future CI users and contributors to adopt, develop, and improve advanced GPU CI for DL systems in their research.

Data management plan for the grant, "CPS: Medium: Integrating sensors, controls, and ecotoxicology with decoupled aquaponics using brackish groundwater and desalination concentrate for sustainable food production." This project aims to develop a cyber-physical system (CPS) testbed of integrated sensors, controls, machine learning, and ecotoxicology tools to engineer sustainable food production systems based on aquaculture using brackish water. The testbed includes an automated recirculating aquaculture system integrated with a real-time ecotoxicology system, implementing the system using desalination concentrate to demonstrate that brackish groundwater desalination costs can be offset by using its byproducts for profitable food production. This project will engage students of the local communities in three major ways: developing an exhibit and activity emphasizing interdisciplinary CPS research conducted during the academic year, offering summer research experiences to students from underrepresented groups, and participating in STEM outreach events targeting underrepresented groups.