This article focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.

Article discusses experimental results which reveal that the apparent activation-energy for grain-growth in an fcc-based AlxCoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3.

This article focuses on a set of experiments in the micro-milling of channels made of aluminum, titanium alloys and stainless steel.

This article investigates the stability of dynamic electrical contacts at a graphene/metal interface using atomic force microscopy (AFM), under static conditions with variable normal loads and under sliding conditions with variable speeds.

This article provides a brief description of the adopted methodology for estimating anthropogenic emission estimation of ocean going vessels and barges.

This article discusses communicating simple sentences using pictorial representations.

Article models work hardening response in TRIP HEAs under tensile deformation, which reflects the hardening due to synergistic activity of multiple deformation mechanisms, using a five-parameter work hardening model.

Article discussing research on architecture support for 3D obfuscation.

This article aims to summarize part of the available literature that reports studies on biomechanical environment in healthy and diseased arteries using various analytical methods.

This article develops a deep-learning algorithm for an on-loom fabric defect inspection system by combining the techniques of image pre-processing, fabric motif determination, candidate defect map generation, and convolutional neural networks (CNNs).

Accepted Manuscript version of an article that presents thoughts on paradigm-shift next generation cryptosystems to overcome the vulnerabilities of the omnipresent conventional cryptosystems.

This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.

This article presents an experimental investigation on the shear strength of self-piercing rivet connections used in thin-walled steel structures.

Article describes how conventional macromechanical tests provide limited insights into complex hierarchical deformation behavior of a transformative high entropy alloy (HEA). In this work, a high throughput microstructure-micromechanical correlative study is presented by combining high-resolution nanoindentation, site-specific microscopy, and Gaussian mixture model (GMM) clustering.

This article varies the surface anchoring strength and achieves a uniform lying helical structure with long-range order as thermodynamically stable state without any external support in Chiral nematic liquid crystals (CLCs).

This article discusses a non-preemptive scheduling algorithm for soft real-time systems.

This article aims to determine the nucleation and growth mechanisms of PbSO4 nanoparticles in various solutions to potentially reduce or control the buildup of PbSO4 on battery electrodes over time.

This article presents an alternative optical method to determine the probe-sample separation distance in a scanning near-field optical microscope.

The article reports on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation, particularly Al₀.₇CoCrFeNi high-entropy alloy (HEA). A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1₂ phase did not delay the formation of adiabatic shear bands (ASB) or affect the ASB width significantly, however, the deformed region around ASB, consisting of high density of twins in fcc phase, was reduced from 80 µm to 20 µm in the stronger precipitation strengthened condition.

Article reporting the high-temperature superlubricity phenomenon accomplished in coatings produced by burnishing powders of antimony trioxide (Sb₂O₃) and magnesium silicate hydroxide coated with carbon (MSH/C) onto the nickel superalloy substrate.

This article explores the role of various geometrical and structural (length, diameter, chirality) as well as external (deformation and strain) carbon nanotube (CNT) parameters to estimate total as well as area-normalized thermal conductance across cross-contact interconnects.

Authors state that this journal review article focuses on the use of assistive and rehabilitative exoskeletons as a new opportunity for individuals with diminished mobility. Overall, this article serves as a valuable resource for individuals working in the field of assistive and rehabilitative exoskeletons, providing insight into the state of the art and potential areas for improvement.

Article on the ion-exchange and associated interfacial reaction mechanisms of silicate glasses. This work reports findings that shed light on the complex ion-exchange mechanisms during glass hydration and enables more detailed understanding of the corrosion and glass-water interactions of silicate glasses which has the potential to impact both science and technology.

Article describes an experiment where nanoindentation of three metastable dual-phase high entropy alloys (HEAs) was performed to obtain their inherent elastoplastic deformation responses.