This article presents a power-efficient complementary metal-oxide-semiconductor (CMOS) neural signal-recording read-out circuit for multichannel neuromodulation implants.

Article discussing a resource efficient and scalable approach to routing in large communication networks.

This article assembles large, pediatric-sized stents (Ø10 - Ø20 mm) from poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 µm and 300 µm. DH-BDS exhibiting hoop strength similar to metal stents and demonstrating minimal degradation and strength loss over the first year before completely disappearing within 3 to 4.5 years show promise as a pediatric interventional alternative to current strategies.

This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

This article is a study where the authors integrated the multi-omics datasets such as copy number aberration, DNA methylation, gene and microRNA expression to identify the signature microRNA-gene associations from frequently aberrated DNA regions across pan-cancer utilizing a LASSO-based regression approach.

This article investigates the design and characterization of a transistor association (TA)-based extended-gate field-effect transistor (EGFET). Prototypes were manufactured using a 130 nm standard complementary metal-oxide semiconductor (CMOS) process and compared with devices presented in recent literature.

Article describes how high energy synchrotron X-ray diffraction was used during tensile testing of an as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. The authors determine for the first time the volume fractions of existing phases, and they further detail their role on the alloy deformation behavior.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

This article describes a system for pupil size estimation with a user interface to allow rapid adjustment of parameters and extraction of pupil parameters of interest in order to identify Parkinson's disease (PD) as early as possible.

This article presents the development of wood flour (WF)-filled polylactic acid (PLA) composite filaments for a fused deposition modeling (FDM) process with the aim of application to 3D printing.

This article critically discusses the role of Magnesium by reviewing recent literature and available data concerning the role of magnesium in neurological disorders. The authors summarize the role of Mg in neurological disorders to illustrate the symptoms caused by Mg-deficiency and the possible underlying mechanisms.

This article discusses the effects of interference on capacity in multi-cell CDMA networks.

Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.

This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability.

This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.

This article uses full-length 16S rRNA gene alignments from the SILVA database to simulate the PCR products of the combined variable regions.

Article describes how fiberboards from scrap denim were fabricated using two different resins, melamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Resin content and MUF-pMDI weight ratio were studied. Physical and mechanical tests determined the modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB), thickness swell (TS), and water absorption (WA).

Article describes study which sought to evaluate methods for activity recognition for toddlers.

Article discusses a novel eutectoid nano-lamellar (FCC + L12)/(BCC + B2) microstructure that has been discovered in a relatively simple Al0.3CoFeNi high entropy alloy (HEA) or complex concentrated alloy (CCA).

This article is a review that categorizes the compositional and microstructural approaches that exhibit potential for a combination of shear induced phase transformation and twinning, thereby expanding beyond the slip based mechanisms.

Article presents for the first time the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic.

This article links the mature near-infrared devices to the mid-infrared regime and demonstrates great potential for integrated chip-scale all-optical signal processes.

This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.