This thesis presents an optimized drive signal control system for a 2.5 GHz Doherty power amplifier (PA). The designed system enables independent control of the amplitudes and phases of the drive signals fed to the inputs of two parallel PAs. This control system is demonstrated here for Doherty PA architecture with a combiner network which is used as an impedance inversion between the path of two parallel connected PAs. Independent control of the inputs is achieved by incorporating a variable attenuator (VA) and a variable phase shifter (VPS) in each of the two parallel paths. Integrating VA and VPS allows driving varying power levels with an arbitrary phase difference between the individual parallel PAs. A Combiner network consists of a quarter-wave transmission line at the output of the main power amplifier, which is used to invert the impedance between the main and peaking transistor. The specific VA (Qorvo QPC6614) and VPS (Qorvo QPC2108) components that are used for the test system provide an amplitude attenuation range from 0.5 dB to 31.5 dB with a step size of 0.5 dB and a phase range from 0◦ to 360◦ for a step size of 5.6◦at the intended operating frequency of 2.5 GHz, …

My thesis is to understand the concept of compressive sensing algorithms. Compressive sensing will be a future alternate technique for the Nyquist rate, specific to some applications where sparsity property plays a major role. Software implementation of compressive sensing (CS) takes more time to reconstruct a signal from CS measurements, so we use the orthogonal matching pursuit and basis pursuit algorithms. We have used an image size of 256x256 is used for reconstruction and also implemented a field-programmable gate array (FPGA) of the orthogonal matching pursuit using an image.

Compressed sensing (CS) is an innovative approach of signal processing that facilitates sub-Nyquist processing of bio-signals, such as a neural signal, electrocardiogram (ECG), and electroencephalogram (EEG). This strategy can be used to lower the data rate to realize ultra-low-power performance, As the count of recording channels increases, data volume is increased resulting in impermissible transmitting power. This thesis work presents the implementation of a CMOS-based front-end design with the CS in the standard 180 nm CMOS process. A novel pseudo-random sequence generator is proposed, which consists of two different types of D flip-flops that are used for obtaining a completely random sequence. This thesis work also includes the (reverse electrowetting-on-dielectric) REWOD based energy harvesting model for self-powered bio-sensor which utilizes the electrical energy generated through the process of conversion of mechanical energy to electrical energy. This REWOD based energy harvesting model can be a good alternative to battery usage, particularly for the bio-wearable applications. The comparative analysis of the results generated for voltage, current and capacitance of the rough surface model is compared to that of results of planar surface REWOD.

The main objective of this thesis is to propose a UAV (also called as drones) location estimation system based on LoRaWAN using received signal strength indicator in a GPS denied environment. The drones are finding new applications in areas such as surveillance, search, rescue missions, package delivery, and precision agriculture. Nearly all applications require the localization of UAV during flight. Localization is the method of determining a UAVs physical position using a real or virtual coordinate system. This thesis proposes a LoRaWAN-based UAV location method and presents experimental findings from a prototype. The thesis mainly consists of two different sections: one is the distance estimation and the other is the location estimation. First, the distance is estimated based on the mean RSSI values which are recorded at the ground stations using the path loss model. Later using the slant distance estimation technique, the path loss model parameters L and C are estimated whose values are unknown at the beginning. These values completely depend on the environment. Finally, the trilateration system architecture is employed to find the 3-D location of the UAV.

Coarse-Grained Reconfigurable Architectures (CGRAs) are promising in developing high performance low-power portable applications. In this research, we crowdsource a mapping problem using gamification to harnass human intelligence. A scientific puzzle game, Untangled, was developed to solve a mapping problem by encapsulating architectural characteristics. The primary motive of this research is to draw insights from the mapping solutions of players who possess innate abilities like decision-making, creative problem-solving, recognizing patterns, and learning from experience. In this dissertation, an extensive analysis was conducted to investigate how players' computational skills help to solve an open-ended problem with different constraints. From this analysis, we discovered a few common strategies among players, and subsequently, a library of dictionaries containing identified patterns from players' solutions was developed. The findings help to propose a better version of the game that incorporates these techniques recognized from the experience of players. In the future, an updated version of the game that can be developed may help low-performance players to provide better solutions for a mapping problem. Eventually, these solutions may help to develop efficient mapping algorithms, In addition, this research can be an exemplar for future researchers who want to crowdsource such electrical engineering problems and this approach can …

This thesis offers the design and improvement of a 2 GHz to 20 GHz low noise amplifier (LNA) utilizing pHEMT technology. The pHEMT technology allows the LNA to generate a boosted signal at a lower noise figure (NF) while consuming less power and achieving smooth overall gain. The design achieves an overall gain (S21) of ≥ 10 dB with an NF ≤ 2 dB while consuming ≤ 30 mA of power while using commercial off-the-shelf (COTS) components.

This thesis includes three separate research projects focusing on computer vision principles and deep learning pattern recognition problems. Chapter 3 entails color quantization applications using traditional Kmeans clustering techniques and random selection of color techniques within the red, green, blue (RGB) color space to maintain a high-quality image while significantly reducing image file size. Chapter 4 consists of a handwriting character recognition algorithm using backpropagation to classify 70,000 handwritten values from US Census Bureau employees and high school students. Chapter 5 proposes a novel classification technique for 109,446 unique heartbeat samples to identify areas of interest and assist medical professionals in diagnosing heart problems.

Group testing is all about identifying properties of a set of elements by testing them.

As technology has advanced, data has become more and more important. The more breakthroughs are achieved, the more data is needed to support them. As a result, more storage is required in the system's memory. Compression is therefore required. Before it can be stored, the data must be compressed. To ensure that information is not lost, efficient compression is necessary. This also makes sure that there is no redundancy in the data that is being kept and stored. Compressive sensing has emerged as a new field of compression thanks to developments in sparse optimization. Rather than relying just on compression and sensing formulations, the theory blends the two. The objective of this thesis is to analyze the concept of compressive sensing and to study several reconstruction algorithms. Additionally, a few of the algorithms were put into practice. This thesis also included a model of the ECG, which is vital in determining the health of the heart. For the most part, the ECG is utilized to diagnose heart illness, and a modified synthetic ECG can be used to mimic some of these arrhythmias.

Emotions have significant importance in human life in learning, decision-making, daily interaction, and perception of the surrounding environment. Hence, it has become very essential to detect and recognize a person's emotional states and to build a connection between humans and computers. This process is called brain-computer interaction (BCI) and is a vast field of research in neuroscience. Hence, in the past few years, emotion recognition has gained adequate attention in the research community. In this thesis, an emotion recognition system is designed and analyzed using EEG signals. Several existing feature extraction techniques are studied, analyzed, and implemented to extract features from the EEG signals. An SVM classifier is used to classify the features into various emotional states. Four emotional states are detected, namely, happy, sad, anger, and relaxed state. The model is tested, and simulation results are presented with an interpretation. Furthermore, this study has mentioned and discussed the efficacy of the results achieved. The findings from this study could be beneficial in developing emotion-sensitive technologies, such as augmented modes of communication for severely disabled individuals who are unable to communicate their feelings directly.

It is known that quantum strategies change the range of possible payoffs for the players in the prisoner's dilemma. In this paper, we examine the effect of the degree of entanglement in determining the payoffs. When both players play quantum strategies, we show that the payoff for both players is unaffected by the entanglement value and it leads to a new Nash equilibrium.

Wireless power transfer (WPT) is currently the most efficient way for transmission of power from one port to another, that is popularly used in various applications.This technique can change the previous energy utilization methods in various applications such as electronic devices, implanted medical devices, electrical vehicles and so forth.It mainly helps overcome the limitations of short battery life, limited storage, heavy weight, and high cost of batteries.This paper is based on the design of a transmitter and a receiver to achieve wireless power transfer for applications like optogenetic stimulation in rodents. With inductive coupling, a very high efficiency can be achieved between the transmitting and receiving coils of an antenna at small distances. When the transmitter and receiver are strongly coupled and are working at their resonant frequencies, the range of efficient WPT can be extended. In this work, the simulations are performed in HFSS at a resonating frequency of 13.56 MHz.A 4-port transmitter and a single-port planar receiver model are developed in HFSS, and the simulations are performed to graph the S parameters with a separation distance of 4cm. A Wilkinson power divider is designed using ADS to split the power from the four ports of the transmitter. The …

The key requirements of a reliable neural signal recording system include low power to support long-term monitoring, low noise, minimum tissue damage, and wireless transmission. The neural spikes are also detected and sorted on-chip/off-chip to implement closed-loop neuromodulation in a high channel count setup. All these features together constitute an empirical neural recording system for neuroscience research. In this prospectus, we propose to develop a neural signal acquisition system with wireless transmission and feature extraction. We start by designing a prototype entirely built with commercial-off-the-shelf components, which includes recording and wireless transmission of synthetic neural data and feature extraction. We then conduct the CMOS implementation of the low-power multi-channel neural signal recording read-out circuit, which enables the in-vivo recording with a small form factor. Another direction of this thesis is to design a self-powered motion tracking read-out circuit for wearable sensors. As the wearable industry continues to advance, the need for self-powered medical devices is growing significantly. In this line of research, we propose a self-powered motion sensor based on reverse electrowetting-on-dielectric (REWOD) with low-power integrated electronics for remotely monitoring health conditions. We design the low-power read-out circuit for a wide range of input charges, which is generated from the …

In recent years, deep learning based computer vision technology has developed rapidly. This is not only due to the improvement of computing power, but also due to the emergence of high-quality datasets. The combination of object detectors and drones has great potential in the field of rescue and disaster relief. We created an image dataset specifically for vision applications on drone platforms. The dataset contains 5000 images, and each image is carefully labeled according to the PASCAL VOC standard. This specific dataset will be very important for developing deep learning algorithms for drone applications. In object detection models, loss function plays a vital role. Considering the uneven distribution of large and small objects in the dataset, we propose adjustment coefficients based on the frequencies of objects of different sizes to adjust the loss function, and finally improve the accuracy of the model.

Air corridors are an integral part of the advanced air mobility infrastructure. They are the virtual highways in the sky for transportation of people and cargo in the controlled airspace at an altitude of around 1000 ft. to 2000 ft. above the ground level. This paper presents fundamental insights into the design of air corridors with high operational efficiency as well as zero collisions. It begins with the definitions of air cube, skylane or track, intersection, vertiport, gate, and air corridor. Then, a multi-layered air corridor model is proposed. Traffic at intersections is analyzed in detail with examples of vehicles turning in different directions. The concept of capacity of an air corridor is introduced along with the nature of distribution of locations of vehicles in the air corridor and collision probability inside the corridor are discussed. Finally, the results of simulations of traffic flows are presented.

The goal of the proposed device and software architecture is to apply the functionality of mixed reality (MR) in order to make a virtual environment that is more accessible to the visually-impaired. We propose a glove-based system for MR that will use finger and hand movement tracking along with tactile feedback so that the visually-impaired can interact with and obtain a more detailed sense of virtual objects and potentially even virtual environments. The software architecture makes current MR frameworks more accessible by augmenting the existing software and extensive 3D model libraries with both the interfacing of the glove-based system and the audibly navigable user interface (UI) of a virtual environment we have developed. We implemented a circuit with finger flexion/extension tracking for all 5 fingers of a single hand and variable vibration intensities for the vibromotors on all 5 fingertips of a single hand. The virtual environment can be hosted on a Windows 10 application. The virtual hand and its fingers can be moved with the system's input and the virtual fingertips touching the virtual objects trigger vibration motors (vibromotors) to vibrate while the virtual objects are being touched. A rudimentary implementation of picking up and moving virtual objects inside …

Occupancy monitoring is an important research problem with a broad range of applications in security, surveillance, and resource management in smart building environments. As a result, it has immediate solutions to solving some of society's most pressing issues. For example, HVAC and lighting systems in the US consume approximately 45-50% of the total energy a building uses. Smart buildings can reduce wasted energy by incorporating networkable occupancy sensors to obtain real-time occupancy data for the facilities. Therefore, occupancy monitoring systems can enable significant cost savings and carbon reduction. In addition, workplaces have quickly adapted and implemented COVID-19 safety measures by preventing overcrowding using real-time information on people density. While there are many sensors, RGB cameras have proven to be the most accurate. However, cameras create privacy concerns. Hence, our research aims to design an efficient occupancy monitoring system with minimal privacy invasion. We conducted a systematic study on sensor characterization using various low-resolution infrared sensors and proposed a unified processing algorithms pipeline for occupancy estimation. This research also investigates low-resolution thermal imaging sensors with a chessboard reading pattern, focusing on algorithm design issues and proposing solutions when detecting moving objects. Our proposed approach achieves about 99% accuracy in occupancy estimation, …

Electrocardiogram (ECG) is a biological signal that represents the heart's electrical activity. Interference from power lines introduces a frequency component of 50 to 60 Hz into the signal, which is the principal cause of ECG corruption. By using the Cadence Virtuoso Spectre circuit simulator and typical TSMC RF 180 nm CMOS technology, a notch filter was created to reduce powerline interference. The advantage of utilizing a notch filter for PLI is that noise at 60 Hz is completely eliminated without sacrificing any important information. Additionally, this study contains a MATLAB-based model for, which is used to compute the power spectral density for the obtained time-domain signal. By incorporating power spectral density into data gathering procedures, it is feasible to enhance data collection methodologies, construct models that appropriately account for observed power and aid in the removal of undesired components. NI LabVIEW is used to extract features. The advantage of ECG feature extraction is that it provides information that assists in the identification of cardiac rhythm issues, and gives information about the occurrence of heart attack. In this study, several patient data sets are utilized to extract characteristics and provide information regarding heart condition abnormalities.

The main objective of this thesis is to propose a localization method for a UAV using various computer vision and machine learning techniques. It plays a major role in planning the strategy for the flight, and acts as a navigational contingency method, in event of a GPS failure. The implementation of the algorithms employs high processing capabilities of the graphics processing unit, making it more efficient. The method involves the working of various neural networks, working in synergy to perform the localization. This thesis is a part of a collaborative project between The University of North Texas, Denton, USA, and the University of Windsor, Ontario, Canada. The localization has been divided into three phases namely object detection, recognition, and location estimation. Object detection and position estimation were discussed in this thesis while giving a brief understanding of the recognition. Further, future strategies to aid the UAV to complete the mission, in case of an eventuality, like the introduction of an EDGE server and wireless charging methods, was also given a brief introduction.

Currently, there is no equipment to measure the real-time fit of EHMR or N-95masks which are used in harsh environments. Improper fit of these EHMRs or N-95 masks exposes the personnel to hazardous environments. Surface acoustic wave (SAW) sensors have been around for few decades and are being used in various applications. In this work, real-time PM2.5 detection using passive wireless SAW sensors is presented. The design of meander antenna at 433MHz for wireless interrogation of SAW sensor using HFSS and ADS is also presented in this thesis. This works also includes the design of YZ-lithium niobate SAW sensor including COMSOL simulation.

This thesis consists of two projects in the field of machine learning. Previous research in the OSCAR UNT lab based on KMeans color quantization is further developed and applied to individual color channels and segmented input images to explore compression rates while still maintaining high output image quality. The second project implements a small-scale dual path network for image classifiaction utilizing the CIFAR-10 dataset containing 60,000 32x32 pixel images ranging across ten categories.

This dissertation is particularly focused on a novel approach of a wirelessly powered neuromodulation system for chronic patients. The inductively coupled transmitter (TX) and receiver (RX) coils are designed through optimization to achieve maximum efficiency. A power management unit (PMU) consisting of a voltage rectifier, voltage regulator along with a stimulation circuitry is also designed to provide pulse stimulation to genetically modified neurons. For continuous health monitoring purposes, the response from the brain due to stimulation needs to be recorded and transmitted wirelessly outside the brain for analysis. A low-power high-data duty-cycled impulse-radio ultra-wideband (IR-UWB) transmitter is designed and implemented using the standard CMOS process. Another focus of this dissertation is the design of a reverse electrowetting-on-dielectric (REWOD) based energy harvesting circuit for wearable sensor applications which is capable of generating a very low-frequency signal from motion activity such a walking, running, jogging, etc. A commercial off-the-shelf (COTS) based and on-chip based energy harvesting circuit is designed for very low-frequency signals. The experimental results show promising progress towards the advancement in the wirelessly powered neuromodulation system and building the self-powered wearable sensor.

The feedback control system is defined as the sampling of an output signal and feeding it back to the input, resulting in an error signal that drives the overall system. This dissertation focuses on the stabilization and performance of state feedback control systems. Chapters 3 and 4 focus on the feedback control protocol approaching in the multi-agents system. In particular, the global regulation of distributed optimization problems has been considered. Firstly, we propose a distributed optimization algorithm based on the proportional-integral control strategy and the exponential convergence rate has been delivered. Moreover, a decentralized mechanism has been equipped to the proposed optimization algorithm, which enables an arbitrarily chosen agent in the system can compute the value of the optimal solution by only using the successive local states. After this, we consider the cost function follows the restricted secant inequality. A dynamic event-triggered mechanism design has been proposed. By ensuring the global regulation of the distributed proportional-integral optimization algorithm, the dynamic event-triggered mechanism efficiently reduces the communication frequency among agents. Chapter 5 focuses on the feedback control protocol approaching the single-agent system. Specifically, we investigate the truncated predictor feedback control of the regulation of linear input-delayed systems. For the purpose of …

Networked multi-agent systems have attracted lots of researchers to develop algorithms, techniques, and applications.A multi-agent networked system consists of more than one subsystem (agent) to cooperately solve a global problem with only local computations and communications in a fully distributed manner. These networked systems have been investigated in various different areas including signal processing, control system, and machine learning. We can see massive applications using networked systems in reality, for example, persistent surveillance, healthcare, factory manufacturing, data mining, machine learning, power system, transportation system, and many other areas. Considering the nature of those mentioned applications, traditional centralized control and optimization algorithms which require both higher communication and computational capacities are not suitable. Additionally, compared to distributed control and optimization approaches, centralized control, and optimization algorithms cannot be scaled into systems with a large number of agents, or guarantee performance and security. All of the limitations of centralized control and optimization algorithms motivate us to investigate and develop new distributed control and optimization algorithms in networked systems. Moreover, convergence rate and analysis are crucial in control and optimization literature, which motivates us to investigate how to analyze and accerlate the convergence of distributed optimization algorithms.