Computational methods were employed to investigate catalytic processes. First, DFT calculations predicted the important geometry metrics of a copper–nitrene complex. MCSCF calculations supported the open-shell singlet state as the ground state of a monomeric copper nitrene, which was consistent with the diamagnetic character deduced from experimental observations. The calculations predicted an elusive terminal copper nitrene intermediate. Second, DFT methods were carried out to investigate the mechanism of C–F bond activation by a low-coordinate cobalt(I) complex. The computational models suggested that oxidative addition, which is very rare for 3d metals, was preferred. A π–adduct of PhF was predicted to be a plausible intermediate via calculations. Third, DFT calculations were performed to study ancillary ligand effects on C(sp3)–N bond forming reductive elimination from alkylpalladium(II) amido complexes with different phosphine supporting ligands. The dimerization study of alkylpalladium(II) amido complexes indicated an unique arrangement of dative and covalent Pd-N bonds within the core four-membered ring of bimetallic complexes. In conclusion, computational methods enrich the arsenal of methods available to study catalytic processes in conjunction with experiments.

There is a consistent need in many industries, especially oil and gas, to develop coatings which have higher corrosion resistance and better hardness to extend the lifetime of equipment when it is exposed to hostile environments. Electrodeposition has been a favorable method in the synthesis of metal coatings because of its low cost, convenience, ability to work at low temperatures, and ability to control surface morphology and structure. The inclusion of ceramic nanoparticles in metal matrix composites has previously been investigated as a technique to not only increase the corrosion resistance of the native metal but also to improve the hardness and mechanical properties. Cerium oxide nanoparticles were modified through the grafting of organic groups with increasing hydrophobicity for use in nickel coatings on stainless steel to further improve the corrosion properties while maintaining the hardness of the nanocomposite coatings. The process of modifying the cerium oxide nanoparticles involved the use of aryl diazonium salts and resulted in multilayers forming on the surface of the nanoparticles. Praseodymium oxide nanoparticles were also investigated as additives to nickel coatings, since praseodymium oxide has not yet been studied as a possible corrosion protection enhancement in coatings. These coatings were evaluated for composition and …

Styrene production by a (FlDAB)PdII(TFA)(η2-C2H4) complex was modeled using density functional theory (DFT). Benzene C-H activation by this complex was studied via five mechanisms: oxidative addition/reductive elimination, sigma-bond metathesis, concerted metalation deprotonation (CMD), CMD activation of ethylene, and benzene substitution of ethylene followed by CMD of the ligated benzene. Calculations provided evidence that conversion of benzene and ethylene to styrene was initiated by the fifth pathway, arylation via CMD of coordinated benzene, followed by ethylene insertion into the Ru-Ph bond, and then β-hydrogen elimination. Also, monomer (active species)/dimer equilibrium concentrations were analyzed. The results obtained from present study were compared with that of a recently reported RhI complex to help identify more suitable catalysts for the direct production of styrene from ethylene and benzene. Second, theoretical studies of heterobimetallic {Ag–Fe(CO)5}+ fragments were performed in conjunction with experiments. The computational models suggested that for this first example of a heterodinuclear, metal-only FeAg Lewis pair (MOLP) that Fe(CO)5 acts as a Lewis base and AgI as a Lewis acid. The ῡCO bands of the studied molecules showed a blue shift relative to those measured for free Fe(CO)5, which indicated a reduction in Fe→CO backbonding upon coordination to silver(I). Electrostatic interaction is predicted …

Porphyrins offer a very synthetically flexible template which can be modified in numerous ways to synthesize molecules with very useful properties applicable in areas such as non-linear optical properties, photodynamic therapy, dye-sensitized solar cells, chemical sensors and organic electronic devices. β-Substituted π-extended porphyrins offer unique capabilities in tuning the properties of the molecule towards practical applications. Increased π-conjugation allows the HOMO-LUMO gap to decrease and hence to redshift the absorption into the near-IR region. β-Fused benzoporphyrins offer additional benefits in which the benzene ring itself can be further modified using electron donating substituents and electron donating substituents to electronically tune these porphyrins for various uses. The goal of the research pursued in this dissertation was to develop new methods for the development of β-Substituted π-extended porphyrins and to study their optical and electronic properties. To accomplish this goal, we developed new method to synthesize A2B2 type tetrabenzoporphyrins and we studied the electron transfer in such systems. We also studied the effectiveness of such systems in dye sensitized solar cells. A new method to synthesize functionalized naphthalene fused porphyrins was also developed and we were also able to use this method to synthesize a push-pull naphthalene fused porphyrin.

This dissertation focuses on the development, characterization, and analysis of luminescent materials and coatings for sensing applications, including CO2, heavy metals, and silver. Chapter 2 involves the use of a gold(I) pyrazolate trimer that is able to detect silver ions with an AgNP medium. Detection of silver is vital, because there is an influx of silver into our environment caused by the increased use of AgNP. Therefore, having a sensor that is able to differentiate between and detect only Ag ions is an important first step to solving the toxicity mystery of AgNPs. Chapter 3 focuses on the development of sensor coatings containing a Eu(III) based luminescent system for sensing dissolved CO2 without the aid of an absorption-based dye. It is well-known that monitoring CO2 levels in our environment is important since even at low concentrations it can cause adverse health effects to the human body. This work demonstrates a pH-sensitive Eu complex being used directly as a CO2 sensor without the aid of any other absorption-based dye. Chapter 4 explores the idea of developing a heavy metal sensor for lead and its ability to detect lead in wide concentration range upon changing the pH of the medium and the …

This work discusses the C-H bond activation by transition metal complexes using various computational methods. First, we performed a DFT study of oxidative addition of methane to Ta(OC2H4)3A (where A may act as an ancillary ligand) to understand how A may affect the propensity of the complex to undergo oxidative addition. Among the A groups studied, they can be a Lewis acid (B or Al), a saturated, electron-precise moiety (CH or SiH), a σ-donor (N), or a σ-donor/π-acid (P). By varying A, we seek to understand how changing the electronic properties of A can affect the kinetics and thermodynamics of methane C–H activation by these complexes. For all A, the TS with H trans to A is favored kinetically over TS with CH3 trans to A. Upon moving from electron-deficient to electron-rich moieties (P and N), the computed C–H activation barrier for the kinetic product decreases significantly. Thus, changing A greatly influences the barrier for methane C–H oxidative addition by these complexes. Secondly, a computational study of oxidative addition (OA) of methane to M(OC2H4)3A (M = Ta, Re and A = ancillary ligand) was carried out using various computational methods. The purpose of this study was to understand how variation …

This work involves synthesis and characterization of isotropic and anisotropic noble metal nanoparticles for applications ranging from antimicrobial uses to anticancer applications. These nanomaterials are stabilized in genuinely benign biomaterials ranging from polymers to cross linked proteins for targeted cancer treatments. The nanoparticles are found to have tunable optical properties.

In the development of covalent organic frameworks (COFs), often the scaffold linkers are assumed to be electro- and photoinactive, and this was also to be the case for 2,3,6,7,10,11-hexahydroxytriphenylene, a tritopic linker. However, as demonstrated in the present study, the reaction product of this linker, hexaoxatriphenylene, is electron rich and when connected to a suitable photosensitizer engages itself in an efficient excited-state charge separation process. In the present study, we have employed BF2-chelated dipyrromethenes (BODIPYs) as sensitizers, which are connected to hexaoxatriphenylene through the center boron, rendering paddle-wheel-type structures. Systematic photophysical, electrochemical, computational, and photochemical studies involving pump-probe femtosecond transient spectroscopy have been performed to establish efficient charge separation in these novel supramolecular structures.

Corrosion is one of the most expensive failures in industries that used metal components and other construction materials. In fact, corrosion is responsible for hundreds of billions-dollar loss in the US alone each year. In general, corrosion occurs when metal surfaces are exposed to water, oxygen, acids, bases, or salts. Therefore, metal substrates must be protected by using materials that act as barriers to avoid destructive corrosion attack. Aluminum is one of the most common metals used in the industry; and it is used in many places such as refining and petroleum production equipment, pipelines, and fossil fuel power plants. Aluminum is known to have corrosion resistance due to the forming of an oxide layer that can be reformed rapidly if the surface gets damaged. However, in the long-term the oxide layer cannot protect the aluminum surface from corrosion because it is stable only in neutral mediums and it is soluble in acidic and basic environments. Barrier protection is one of the most effective methods that prevent aluminum surfaces from being exposed to corrosive environments. These barriers can be organic or inorganic coatings that can limit the electron transport or the cathodic and the anodic reactions between aluminum alloys and …

Computational chemistry has gained interest as a characterization tool to predict photoluminescence, reactivity and structural properties of organic and transition metal complexes. With the rise of methods including relativity, these studies have been expanded to the accurate modeling of luminescence spectra of complexes with considerable spin-orbit splitting due to heavy metal centers as well as the reaction pathways for these complexes to produce natural products such as hydrogen gas. These advances have led to the synthesis and utility of more effective catalysis as well as the development of more effective organic light emitting diodes (OLEDs) through the incorporation of organometallic complexes as emitters instead of typical organic emitters. In terms of significant scientific advancement presented in this work is in relation to the discovery of significant spin-orbit splitting in a gold(I) alkylphosphine complex, where the splitting results in the states that emit in different colors of the visible region of the electromagnetic spectrum. This work also reveals the discovery both computationally and experimentally, of a genuine polar-covalent bond between two-closed shell metals. This work highlights a complex with an incredibly short gold(I) – copper(I) intermetallic distance leading to a vibrational frequency and dissociation energy that is on par with those …

Six peripherally meso-modified Zn (II) porphyrin sensitizer dyes are designed and their J-V performance in dye sensitized solar cell (DSSC) evaluated. Electron-donating groups including phenothiazine, carbazole and pyrene are used to modify the porphyrin macrocycle at the meso-carbon position(s). To compare the effect of donor substitution on the performance of the cells in terms of short circuit current (Jsc), light harvesting efficiency (LHE) and power conversion efficiency (η), two sets of sensitizers with different degrees of substitution are synthesized. One set of dyes (mono-substituted) have one electron donor at trans-position to the acceptor, while the second set (tri-substituted) dyes have three of the same type electron donor groups at 5, 10 and 15 meso-carbon positions making all the six dyes push-pull type sensitizers incorporating 4'-carboxyphenyl as an electron-acceptor/anchor group. Different spectroscopic and electrochemical methods are used to study the photophysical and electrochemical properties of the dyes, while the photovoltaic performance of their cells under 1.5 A.M is studied using solar simulator. Meso-substitution of Zinc (II) porphyrin with these small donor molecules is shown to improve the light harvesting character of the Zinc (II) porphyrin macrocycle in the UV-Vis absorption while at same time improving its fluorescence quantum yield, excited-state life …