Degree Discipline

10 Matching Results

Results open in a new window/tab.

Kinetic Study of the Reactions of Chlorine Atoms with Fluoromethane and Fluoromethane-d3 in the Gas Phase (open access)

Kinetic Study of the Reactions of Chlorine Atoms with Fluoromethane and Fluoromethane-d3 in the Gas Phase

The kinetics of the gas-phase reactions of chlorine atoms with fluoromethane (CH3F) and fluoromethane-d3(CD3F) were tested experimentally. The relative rate method was applied by using CH4 as the reference compound for fluoromethane (CH3F) and CH4 and CH3F as the reference compound for fluoromethane-d3(CD3F). The rate constants for H-abstraction from CH3F and D-abstraction from CD3F were measured at room temperature and a total pressure of 920 Torr using Ar as a diluent. The rate constants are described by the expressions: kH= (3.50±0.52) x 10-13 cm3 molecule-1 s-1 and kD=(5.0±0.51) x 10-14 cm3 molecule-1 s-1. The kinetic isotope effect, equal to the ratio kH/kD, was found to be 7.0±1.2 at room temperature.
Date: August 2017
Creator: Shao, Kejun
System: The UNT Digital Library
MBE Growth and Characterization of Graphene on Well-Defined Cobalt Oxide Surfaces: Graphene Spintronics without Spin Injection (open access)

MBE Growth and Characterization of Graphene on Well-Defined Cobalt Oxide Surfaces: Graphene Spintronics without Spin Injection

The direct growth of graphene by scalable methods on magnetic insulators is important for industrial development of graphene-based spintronic devices, and a route towards substrate-induced spin polarization in graphene without spin injection. X-ray photoelectron spectroscopy (XPS), low energy electron diffraction LEED, electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES) demonstrate the growth of Co3O4(111) and CoO(111) to thicknesses greater than 100 Å on Ru(0001) surfaces, by molecular beam epitaxy (MBE). The results obtained show that the formation of the different cobalt oxide phases is O2 partial pressure dependent under same temperature and vacuum conditions and that the films are stoichiometric. Electrical I-V measurement of the Co3O4(111) show characteristic hysteresis indicative of resistive switching and thus suitable for advanced device applications. In addition, the growth of Co0.5Fe0.5O(111) was also achieved by MBE and these films were observed to be OH-stabilized. C MBE yielded azimuthally oriented few layer graphene on the OH-terminated CoO(111), Co0.5Fe0.5O(111) and Co3O4(111). AES confirms the growth of (111)-ordered sp2 C layers. EELS data demonstrate significant graphene-to-oxide charge transfer with Raman spectroscopy showing the formation of a graphene-oxide buffer layer, in excellent agreement with previous theoretical predictions. XPS data show the formation of C-O covalent bonding between …
Date: August 2017
Creator: Olanipekun, Opeyemi B
System: The UNT Digital Library
Elucidation of Photoinduced Energy and Electron Transfer Mechanisms in Multimodular Artificial Photosynthetic Systems (open access)

Elucidation of Photoinduced Energy and Electron Transfer Mechanisms in Multimodular Artificial Photosynthetic Systems

Multimodular designs of electron donor-acceptor systems are the ultimate strategy in fabricating antenna-reaction center mimics for artificial photosynthetic applications. The studied photosystems clearly demonstrated efficient energy transfer from the antenna system to the primary electron donor, and charge stabilization of the radical ion pair achieved with the utilization of secondary electron donors that permits either electron migration or hole transfer. Moreover, the molecular arrangement of the photoactive components also influences the route of energy and electron transfer as observed from the aluminum(III) porphyrin-based photosystems. Furthermore, modulation of the photophysical and electronic properties of these photoactive units were illustrated from the thio-aryl substitution of subphthalocyanines yielding red-shifted Q bands of the said chromophore; hence, regulating the rate of charge separation and recombination in the subphthalocyanine-fullerene conjugates. These multicomponent photosystems has the potential to absorb the entire UV-visible-NIR spectrum of the light energy allowing maximum light-harvesting capability. Furthermore, it permits charge stabilization of the radical ion pair enabling the utilization of the transferred electron/s to be used by water oxidizing and proton reducing catalysts in full-scale artificial photosynthetic apparatuses.
Date: May 2017
Creator: Lim, Gary Lloyd
System: The UNT Digital Library
Disease Tissue Imaging and Single Cell Analysis with Mass Spectrometry (open access)

Disease Tissue Imaging and Single Cell Analysis with Mass Spectrometry

Cells have been found to have an inherent heterogeneity that has led to an increase in the development of single-cell analysis methods to characterize the extent of heterogeneity that can be found in seemingly identical cells. With an understanding of normal cellular variability, the identification of disease induced cellular changes, known as biomarkers, may become more apparent and readily detectable. Biomarker discovery in single-cells is challenging and needs to focus on molecules that are abundant in cells. Lipids are widely abundant in cells and play active roles in cellular signaling, energy metabolism, and are the main component of cellular membranes. The regulation of lipid metabolism is often disrupted or lost during disease progression, especially in cancer, making them ideal candidates as biomarkers. Challenges exist in the analysis of lipids beyond those of single-cell analysis. Lipid extraction solvents must be compatible with the lipid or lipids of interest. Many lipids are isobaric making mass spectrometry analysis difficult without separations. Single-cell extractions using nanomanipulation coupled to mass spectrometry has shown to be an excellent method for lipid analysis of tissues and cell cultures. Extraction solvents are tunable for specific lipid classes, nanomanipulation prevents damage to neighboring cells, and lipid separations are possible …
Date: May 2017
Creator: Hamilton, Jason S.
System: The UNT Digital Library
Reductive Functionalization of 3D Metal-Methyl Complexes and Characterization of a Novel Dinitrogen Dicopper (I) Complex (open access)

Reductive Functionalization of 3D Metal-Methyl Complexes and Characterization of a Novel Dinitrogen Dicopper (I) Complex

Reductive functionalization of methyl ligands by 3d metal catalysts and two possible side reactions has been studied. Selective oxidation of methane, which is the primary component of natural gas, to methanol (a more easily transportable liquid) using organometallic catalysis, has become more important due to the abundance of domestic natural gas. In this regard, reductive functionalization (RF) of methyl ligands in [M(diimine)2(CH3)(Cl)] (M: VII (d3) through CuII (d9)) complexes, has been studied computationally using density functional techniques. A SN2 mechanism for the nucleophilic attack of hydroxide on the metal-methyl bond, resulting in the formation of methanol, was studied. Similar highly exergonic pathways with very low energy SN2 barriers were observed for the proposed RF mechanism for all complexes studied. To modulate RF pathways closer to thermoneutral for catalytic purposes, a future challenge, paradoxically, requires finding a way to strengthen the metal-methyl bond. Furthermore, DFT calculations suggest that for 3d metals, ligand properties will be of greater importance than metal identity in isolating suitable catalysts for alkane hydroxylation in which reductive functionalization is used to form the C—O bond. Two possible competitive reactions for RF of metal-methyl complexes were studied to understand the factors that lower the selectivity of C—O bond …
Date: May 2017
Creator: Fallah, Hengameh
System: The UNT Digital Library
Design, Synthesis and Optoelectronic Properties of Monovalent Coinage Metal-Based Functional Materials toward Potential Lighting, Display and Energy-Harvesting Devices (open access)

Design, Synthesis and Optoelectronic Properties of Monovalent Coinage Metal-Based Functional Materials toward Potential Lighting, Display and Energy-Harvesting Devices

Groundbreaking progress in molecule-based optoelectronic devices for lighting, display and energy-harvesting technologies demands highly efficient and easily processable functional materials with tunable properties governed by their molecular/supramolecular structure variations. To date, functional coordination compounds whose function is governed by non-covalent weak forces (e.g., metallophilic, dπ-acid/dπ-base stacking, halogen/halogen and/or d/π interactions) remain limited. This is unlike the situation for metal-free organic semiconductors, as most metal complexes incorporated in optoelectronic devices have their function determined by the properties of the monomeric molecular unit (e.g., Ir(III)-phenylpyridine complexes in organic light-emitting diodes (OLEDs) and Ru(II)-polypyridyl complexes in dye-sensitized solar cells (DSSCs)). This dissertation represents comprehensive results of both experimental and theoretical studies, descriptions of synthetic methods and possible application allied to monovalent coinage metal-based functional materials. The main emphasis is given to the design and synthesis of functional materials with preset material properties such as light-emitting materials, light-harvesting materials and conducting materials. In terms of advances in fundamental scientific phenomena, the major highlight of the work in this dissertation is the discovery of closed-shell polar-covalent metal-metal bonds manifested by ligand-unassisted d10-d10 covalent bonds between Cu(I) and Au(I) coinage metals in the ground electronic state (~2.87 Å; ~45 kcal/mol). Moreover, this dissertation also reports pairwise …
Date: August 2017
Creator: Ghimire, Mukunda Mani
System: The UNT Digital Library
Microwave-Assisted Synthesis and Photophysical Properties of Poly-Imine Ambipolar Ligands and Their Rhenium(I) Carbonyl Complexes (open access)

Microwave-Assisted Synthesis and Photophysical Properties of Poly-Imine Ambipolar Ligands and Their Rhenium(I) Carbonyl Complexes

The phenomenon luminescence rigidochromism has been reported since the 1970s in tricarbonyldiimine complexes with a general formula [R(CO)3LX] using conventional unipolar diimine ligands such as 2,2;-bipyridine or 1,10-phenanthroline as L, and halogens or simple solvents as X. As a major part of this dissertation, microwave-assisted synthesis, purification, characterization and detailed photoluminescence studies of the complex fac-[ReCl(CO)3L], 1, where L = 4-[4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl]-N,N-diethylbenzenamine are reported. The employment of microwaves in the preparation of 1 decreased the reaction time from 48 to 2 hours compared to the conventional reflux method. Stoichiometry variations allows for selective preparation of either a mononuclear, 1, or binuclear, fac-[Re2Cl2(CO)6], 2, complex. The photophysical properties of 1 were analyzed finding that it possesses significant luminescence rigidochromism. The steady state photoluminescence emission spectra of 1 in solution shift from 550 nm in frozen media to 610 nm when the matrix becomes fluid. Moreover, a very sensitive emission spectral analysis of 0.1 K temperatures steps shows a smooth transition through the glass transition temperature of the solvent host. Furthermore, synthetic modifications to L have attained a family of ambipolar compounds that have tunable photophysical, thermophysical and other material properties that render them promising candidates for potential applications in organic electronics and/or …
Date: August 2017
Creator: Salazar Garza, Gustavo Adolfo
System: The UNT Digital Library
Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance (open access)

Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance

The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective layer on many metallic substrates. In recent years, there has been interest in incorporation nano-dimensional ceramic materials, such as montemorillonite, into the metal matrices to improve upon the corrosion and mechanical properties. Layered double hydroxides have been used as corrosion enhancer in polymer coatings by increasing mechanical strength and lowering the corrosion rate but until now, have not been incorporated in a metal matrix by any means. Layered double hydroxides can be easily synthesized in a variety of elemental compositions and sizes but typically require the use of non-polar solvents to delaminate into nanodimensional colloidal suspensions. The synthesis of a Zn-Al LDH has been studied and characterized. The effects of the non-polar solvents dimethylformamide and n-butanol on the deposition and corrosion resistance of nickel coatings from a borate electrolyte bath have been studied, a nickel-LDH nanocomposite coating has been synthesized by electrochemical deposition and the corrosion resistance has been studied. Results indicate an improvement in corrosion resistance for the …
Date: August 2017
Creator: Daugherty, Ryan E.
System: The UNT Digital Library
Application of UV-Vis Spectroscopy to the Monitoring, Characterization and Analysis of Chemical Equilibria of Copper Etching Baths (open access)

Application of UV-Vis Spectroscopy to the Monitoring, Characterization and Analysis of Chemical Equilibria of Copper Etching Baths

The continuously increasing demand for innovation in the miniaturization of microelectronics has driven the need for ever more precise fabrication strategies for device packaging, especially for printed circuit boards (PCBs). Subtractive copper etching is a fundamental step in the fabrication process, requiring very precise control of etch rate and etch factor. Changes in the etching chemical equilibrium have significant effects on etching behavior, and CuCl2 / HCl etching baths are typically monitored with several parameters including oxidation-reduction potential, conductivity, and specific gravity. However, the etch rate and etch factor can be difficult to control even under strict engineering controls of those monitoring parameters. The mechanism of acidic cupric chloride etching, regeneration and recovery is complex, and the current monitoring strategies can have difficulty controlling the interlocking chemical equilibria. A complimentary tool, thin-film UV-Vis spectroscopy, can be utilized to improve the current monitoring strategies, as UV-Vis is capable of identifying and predicting etching behavior that the current standard methodologies have difficulty predicting. Furthermore, as a chemically-sensitive probe, UV-Vis can investigate the complex changes to the chemical equilibrium and speciation of the etch bath, and can contribute overall to significant improvements in the control of the copper etching system in order to …
Date: August 2017
Creator: Lambert, Alexander S.
System: The UNT Digital Library
Synthesis and Application of New Chiral Ligands for Enantioselectivity Tuning in Transition Metal Catalysis (open access)

Synthesis and Application of New Chiral Ligands for Enantioselectivity Tuning in Transition Metal Catalysis

A set of five new C3-symmetric phosphites were synthesized and tested in palladium-catalyzed asymmetric Suzuki coupling. The observed reactivity and selectivity were dependent upon several factors. One of the phosphites was able to achieve some of the highest levels of enantioselectivity in asymmetric Suzuki couplings with specific substrates. Different hypotheses have been made for understanding the ligand effects and reaction selectivities, and those hypotheses were tested via various methods including DOSY NMR experiments, X-ray crystallography, and correlation of catalyst selectivity with Tolman cone angles. Although only modest enantioselectivities were observed in most reactions, the ability to synthesis these phosphites in only three steps on gram scales and to readily tune their properties by simple modification of the binaphthyl 2´-substituents makes them promising candidates for determining structure-selectivity relationships in asymmetric transition metal catalysis, in which phosphites have been previously shown to be successful. A series of novel chiral oxazoline-based carbodicarbene ligands was targeted for synthesis. Unfortunately, the chosen synthetic route could not be completed due to unwanted reactivity of the oxazoline ring. However, a new and efficient route for Pd-catalyzed direct amination of aryl halides with oxazoline amine was developed and optimized during these studies. Chiral binaphthyl based Pd(II) ADC complexes …
Date: August 2017
Creator: Kong, Fanji
System: The UNT Digital Library