Six bis(silyl)acetylenes with the following varied silicon substituents were prepared: I (Me, Me); II (H, H); III (Cl, H); IV (Cl, Cl); V (OMe, H); VI (OMe, OMe). While I and II may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with appropriate chlorosilane, similar reactions designed to give III - VI give oligomers, YMe_2Si(C≡C-SiMe_2)_nY, VII, Y = Cl, OMe, as the major products indicating that the acetylenic functionality on silicon activates the chlorosilane toward nucleophilic substitution. Compounds III and IV were prepared by free radical chlorination of II. Methanolysis of III and IV gave quantitative yields of V and VI, respectively. In the presence of mineral acid, VI readily cyclized to give high yields of the cyclic siloxane octamethyl-4,9-dioxa-3,5,8,10-tetrasila-cyclodeca-1,6-diyne, VIII, and the analogous triyne, IX. It was determined that V and VI could be prepared directly from II in high yield by methanolysis with palladium catalyst. Vaska's complex also accomplished the conversion. I attempted to prepare bis(ethoxydimethylsilyl)acetylene by using of Wilkinson 's catalyst for hydrosilylation with acetaldehyde. The principal product of this reaction was 1-(dimethylsilyl)-3,5,5-trimethyl-4-oxa-3-silacyclopent-1-ene, XI.

The objective of this study was to synthesize and characterize new energetic polycyclic "cage" compounds. As part of a program involved in the synthesis of new polynitropolycyclic compounds, 2,6-dinitro-5-methoxy- 7-carbomethoxypentacyclo[5. 3 .0 . 0* • * . CP • i ° . 0* •8]decane has been synthesized. This is a model system which can be used to study (1) the effect of nitro substitution on the photolability of carbon-carbon double bonds and (2) to develop methods for avoiding Haller-Bauer cleavage in cage /3-keto esters when synthesizing polynitro-substituted cage compounds.

Four mechanisms were considered as possible causes of the loss in resolution for a Dionex CG2 ion chromatography resin: 1) presence of inorganic ions strongly bound to the active sites; 2) adsorption of organic species; 3) physical alterations; and 4) chemical alterations. The instrumental analyses used to gather data were ICP, FT-IR, SEM, solid C-13 NMR and IC. Based on the results, no metal ions are bound to the resin, no organic species are held onto the resin, and no physical change was observable. The cause for the loss of resolution is a strong reduction in the number of active sites in the resin as confirmed by elemental analysis for the sulfur in the sulfonic acid present in the active sites.

One objective of this study was to explore the intramolecular [2+2] cycloadditions of phenoxyketenes to carbonyl groups with isoflavones and benzofurans as target compounds. The other objective was to investigate the eyeloaddition reactions of rarely studied aminoketenes. The conversion of 2-(carboxyalkoxy)benzils to the corresponding phenoxyketenes leads to an intramolecular [2+2] cycloaddition to ultimately yield isoflavones and/or 3-aroylbenzofurans. The product distributions are dependent upon the substitution pattern in the original benzil acids. The initial cycloaddition products, β-lactones, are isolated in some instances while some β-lactones spontaneously underwent decarboxylation and could not be isolated. The ketene intermediate was demonstrated in the intramolecular reaction of benzil acids or ketoacids with sodium acetate and acetic anhydride. It is suggested that sodium acetate and acetic anhydride could serve as a source for the generation of ketenes directly from certain organic acids. The treatment of ketoacids with acetic anhydride and sodium acetate provides a simpler procedure to prepare benzofurans than going through the acid chloride with subsequent triethylamine dehydrochlorination to give the ketenes. N-Ary1-N-alkylaminoketenes were prepared for the first time from the corresponding glycine derivatives by using p-toluenesulfonyl chloride and triethylamine. These aminoketenes underwent in situ cycloadditions with cyclopentadiene, cycloheptene and cyclooctenes to yield only the …

The structures of Diels-Alder cycloaddition of cyclopentadiene to 2,6-dimethyl-p-benzoquinone and methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone were assigned by analysis of 1-D and 2-D proton and carbon-13 NMR spectra. The structures of the cycloadduct of methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone and that of the corresponding intramolecular [2+2] photocyclization product were also obtained by single crystal X-ray structural analysis. As the second part of the study, a new polycyclic "cage" molecule, a substituted trishomocubane isomer, was synthesized. In this synthesis, reductive bond cleavage followed by Dieckmann condensation was employed. Wolff-Kishner reduction then was used to convert a β-keto ester "cage" molecule to the corresponding carboxylic acid. A compound that possesses twofold symmetry was isolated from reaction product mixture. The structure of this compound has been established by single crystal X-ray crystallography.

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.

Diels-Alder cycloaddition of methylcyclopentadienes to 2,5-dibromo-p-benzoquinone was performed. A single, isomerically pure cycloadduct was isolated, whose structure was assigned via analysis of its 1-D and 2-D NMR spectra. Diels-Alder cycloaddition of methylcyclopentadienes to 2 -methoxy-p-benzoquinone was performed. A single, isomerically pure cycloadduct was isolated, whose structure was assigned via analysis of the 1-D and 2-D NMR spectra of this cycloadduct and its reduction product obtained via stereo-specific reduction with sodium borohydride in the presence of cerous chloride. The structure of Thiele's ester was assigned via analysis of its 1-D and 2-D NMR spectra.

Reaction of the tetracobalt cluster Co4(CO)10(t 4-PPh)2 with 1,2-bis(dimethylphosphino)ethane (dmpe) affords the bis-substituted cluster Co4(CO)8(dmpe)(t 4-PPh)2. The bidentate dmpe ligand is shown to bind to the cluster in a chelating fashion by IR, NMR, and X-ray diffractions analyses. The fluxional nature of the ancillary carbonyl groups has been studied by variable temperature 13C NMR measurements which reveal two distinct carbonyl scrambling pathways. The stability of the phosphine-ligated cluster has been examined using in situ Cylindrical Internal Reflection (CIR) Spectroscopy. The effect of the dmpe ligand on the cluster polyhedron will be discussed with respect to the observed crystallographic and spectroscopic results

Diels-Alder [4+2] cycloaddition of a mixture of 1- and 2 methylcyclopentadiene to 2-phenyl-g.-benzoquinone affords a mixture of four nd cycloadducts. A single, isomerically pure cycloadduct was isolated by careful column chromatography. Stereospecific reduction of this material with sodium borohydride and cerium(III) chloride 'affords a single, isomerically pure tricyclic diol. The structures of the cycloadduct and this tricyclic diol, established via analysis of their one- and two-dimensionial NMR spectra, were shown to be (1-methyl-5-phenyltricyclo[6.2.1.02,7]undec a-4,9 diene-3,6-dione and 1-methyl-5-phenyltricyclo[6.2.1.0 2 ,7 ]undeca-4,9-diene t.&A-3-=.a-6-diol), respectively. Intramolecular [2+2] photocyclization of this tricyclic diol afforded the corresponding cage diol, 3-methyl-7phenylpentacyclo[5.4.0.0 2 ,6 .03 , 1 0 .05, 9 ]undecane-.exogxa-8,11-diol. Oxidation of this cage diol with pyridinium chlorochromate in dry dichloromethane afforded a single, isomerically pure cage hydroxyketone, 3-methyl-7 phenylpentacyclo[5.4.02,6.03,l .1519]undecane-xA-8-ol-II-one, whose structure was established by single crystal X-ray crystallographic methods.

The temperature dependence of the reactions of halogen atoms Cl and Br with SiH4 and (CH3)3SiH have been investigated with the flash photolysis-resonance fluorescence technique. CCI4 and CH2Br2 were used as precursors to produce Cl and Br atoms, respectively. Experiments gave {k(Cl + SiH4) (295 - 472 K)} = (1.56 +0.11) x 10-1 exp[(2.0 + 0.2) kJ mol'/RT] cm3 s4, {k(Br + SiH4)(295 - 575 K)} = (9.0 + 1.5) x 10-" exp[-(17.0 + 0.6) Id mol'/RT] cm3 s', {k(Cl + (CH3)3SiH)(295 - 468 K)} = (1.24 0.35) x 104 exp[(1.3 + 0.8) Id mol4/RT] cm3 s', and {k(Br + (CH3)3SiH)(295 - 456 K)} = (7.6 + 3.3) x 1010 exp[-(28.4 + 1.3) Id mol'/RT] cm3 s'. The results were compared with values from earlier work.

Evidence is reported for the formation of carbon-containing contamination products at the copper-tungsten (Cu-W) interface during the metal organic chemical vapor deposition (MOCVD) of copper on tungsten. Cu(II)bishexafluoroacetylacetonate [Cu(hfac)_2] was physisorbed onto lightly oxidized tungsten (WO_x) at 115K, under ultra-high vacuum conditions, and then annealed sequentially to higher temperatures. Copper reduction was observed by 320K. Carbonaceous and carbidic contamination of the WO_x surface was observed, even after sample warming to 625K in UHV. The results indicate that low temperature MOCVD of Cu may be possible, but interfacial contamination from the organic ligand fragmentation is a major concern.

One- and two-dimensional NMR spectroscopy, including 13C{6Li}{1H} triple resonance techniques, were used to characterize a series of mixed alkyllithium aggregates and to study their exchange processes.

The determination of carbon monoxide is also possible by trapping CO on preconditioned molecular sieve and thermal desorption. Analysis in this case is performed by gas chromatography/mass spectroscopy, although the trapping technique is applicable to other suitable GC techniques.

The purpose of this study was to determine the factors affecting the acid degradation of chrysotile asbestos (Mg_3Si_2O_5(OH_4)) . Millions of tons of asbestos have found use in this country as insulative or ablative material. More than 95 percent of the asbestos in use is of the chrysotile variety. The remaining 5 percent is composed of various types of fibrous amphiboles. The inhalation of asbestos can lead to several diseases in humans. Asbestosis, lung cancer and mesothelioma are the most common afflictions associated with asbestos inhalation, and they may occur up to 40 years after the initial exposure. It has previously been reported that if more than 50 percent of the magnesium is removed from a chrysotile sample its carcinogenicity is reduced to nil. Several inorganic acids were studied to determine their ability to leach magnesium from chrysotile. It was found that the ability to leach magnesium was dependent upon the acidic anion in addition to the concentration of the acid. The ordering of the efficiency of the acids in their ability to remove magnesium from chrysotile was found to be HCl > H_2SO_4 > H_3PO_4 > HNO_3. Predictive equations were developed to allow the calculation of the amount of …

Two types of solder samples, pins and through-holes were tested by SERA™ (Sequential Electrochemical Reduction Analysis) and Wetting Balance after various length of steamaging treatment. It was shown that after steam-aging, both types of specimen gave a similar electrochemical reduction curve, and solderabilty predictions made from SERA™ test agree with results obtained from Wetting Balance test on a qualitative base. Wetting balance test of pin samples after SERA™ test confirmed that SERA™ is a non-destructive testing method -- it even restored solderability. Comparison of electrochemical reduction behavior of samples under different treatment indicates that steam-aging can not reproduce exactly the effect of naturally atmospheric aging, and may not be the best artificial accelerating environment adopted.

The Sn/Pb eutectic alloy system is the most widely used joining material in the electronics industry. In this application, the solder acts as both an electrical and mechanical connection within and among the different packaging levels in an electronic device. Recent advances in packaging technologies, however, driven by the desire for miniaturization and increased circuit speed, result in severe operating conditions for the solder connection. In an effort to improve its mechanical integrity, metallic or intermetallic particles have been added to eutectic Sn/Pb solder, and termed composite solders. It was the goal of this study to investigate the growth and morphology of the two intermetallic phases (Cu6Sn5 and Cu3Sn) that form between a Cu substrate and Sn/Pb solder under different aging and annealing conditions.

The fluorescence spectrum of many polycyclic aromatic compounds (PACs) depends upon solvent polarity. The emission spectrum of PAC monomers consists of several major vibronic bands labeled I, II, etc., in progressive order. Emission intensity enhancement of select bands is observed in polar solvents.

This research was designed to investigate the hydration reaction of fly ash when exposed to water. The effects that calcium nitrate and calcium formate have on the hydration reactions were also examined.

The microstructural, mechanical and thermal properties of various composite solder formulations were investigated. Special interest was given in observing the processing properties, microstructural characteristics, fatigue behavior, tensile strength, and the effect of environmental ageing on the composite solder formulations. The solderability parameters wetting and speed of soldering, reflow temperature, and the thermal stability of the resulting composite solder were also examined.

The tricobalt cluster PhCCo₃(CO)₉ (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic thioanhydride (bta) with added Me₃NO to yield PhCCo₃(CO)₇(bta) (2), which upon heating overnight yields Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂) (3). Cluster (3) has been isolated and characterized by FT-IR and ³¹P NMR spectroscopy. Structural determination of the cluster has been demonstrated by X-ray diffraction analysis. Cluster (3) is analogous to the cluster synthesized by Richmond and coworkers. The redox properties of (3) have been examined by cyclic voltammetry and the data are reported within.

Tensile properties, namely the elastic modulus, tensile strength, percent of elongation at yield and at the break were determined for the pure components and blends. The results are connected to the respective phase diagrams and demonstrate that blending makes property manipulation possible. Blends for which the mechanical properties are better than those of pure EPs can be obtained.

Extended Hückel methods are known to be a useful tool in understanding surface phenomena. Important quantities about atoms and chemical bonds can be obtained from this computationally simple method, although caution must be exercised in interpreting the results. Application of Extended Hückel calculations to large metal clusters reveals the role of d orbitals in solids. Basic ideas of constructing model compounds have been developed. Several model systems for surface chemisorption processes are constructed in order to understand the surface catalyzed oxidative degradation of polyperfluoroethers. The activation of oxygen molecules can be explained. The Lewis acid character of the iron fluoride surface can be predicted. Based on these results, mechanisms of the degradation processes are discussed.

I. Reductive dimerization of pentacyclo[5.4.0.0.^2,6.0^3,10.0^5'9]undecane-8-one-(PCU-8-one, 53) affords a mixture of meso and d,l pinacols (55a and 55b respectively). Acid promoted rearrangement of 55a and 55b conceivably can proceed with migration of C(7)-C(8) and/or C(8)-C(9) to form the corresponding pinacolone(s). In our hands, acid promoted rearrangement of 55a and 55b each proceeds with exclusive migration of C(7)- C(8) bond, thereby affording 58a and 59a respectively. Mechanistic features of this rearrangement are discussed. II. 4,7,1 l-trimethylpentacyclo[6.3.0.0.^2,6.0^3,l0.0^5,9]undecane-exo-4,exo-7-diol (23a) was successfully synthesized. This diol crystallizes in a helical tubuland lattice although its molecular structure does not possess C2 rotational symmetry.

Part I: In the first study of pyrethroids, twenty-one novel pyrethroid esters bearing strong electron-withdrawing groups (e.g., halomethylketo and nitro groups) in the double bond side chain of the cyclopropane acid moiety have been synthesized and evaluated for insect toxicity. Rather than the usually employed Wittig reaction for these syntheses, the novel pyrethroid acid moieties were prepared by amino acidcatalyzed Knoevenagel condensations under mild conditions. In the second study of pyrethroids, fourteen pyrethroid-like carbonates were synthesized by condensation of a variety of alcohols and the chloroformates of the corresponding known pyrethroid alcohols.