An NMR study of 2-ethyl-1-butyllithium and of 2-ethyl-1-butyllithium/lithium 2-ethyl-1-butoxide mixed aggregates (open access)

An NMR study of 2-ethyl-1-butyllithium and of 2-ethyl-1-butyllithium/lithium 2-ethyl-1-butoxide mixed aggregates

A 1H, 13C, and 6Li NMR study of 2-ethyl-1-butyllithium indicated that 2-ethyl-1-butyllithium exists only as a hexameric aggregate over the entire temperature range of 25 to - 92.1 ° C in cyclopentane. Reacting 2-ethyl-1-butyllithium with 2-ethyl-1-butanol resulted in alkyllithium/lithium alkoxide mixed aggregates, apparently of the form Ra(RO)bLia+b. A multinuclear, variable temperature NMR study of samples with O:Li ratios of 0.2 and 0.4 showed, in addition to the alkyllithium, the formation of four mixed aggregates, one of them probably an octamer. Higher O:Li ratio samples showed the formation of several other mixed aggregates. Mixing 2-ethyl-1-butyllithium with independently prepared lithium 2-ethyl-1-butoxide formed the same mixed aggregates formed by in situ synthesis of lithium alkoxide. Lithium 2-ethyl-1-butoxide also exists as aggregates in cyclopentane.
Date: May 2001
Creator: Ferreira, Aluisio V. C.
System: The UNT Digital Library
Experimental and Theoretical Studies of Polycarbocyclic Compounds (open access)

Experimental and Theoretical Studies of Polycarbocyclic Compounds

Part I. Diels-Alder cycloadditions of 1,2,3,4,9,9-hexachloro-1α,4α,4aα,8aβ-tetrahydro-l,4-methanonaphthalene (32) and 1,2,3,4,9,9-hexachloro-lα,4α,6,7- tetrahydro-l,4-methanonaphthalene (33) to 4-methyl- and 4-phenyl-l,2,4-triazoline-3,5-dione [MTAD and PTAD, respectively] and to N-methylmaleimide (NMM) have been studied. The structures of several of the resulting cycloadducts were determined by X-ray crystallographic methods. The observed stereoselectivity of each of these Diels-Alder reactions was further investigated via application of theoretical methods. Thus, semiempirical (AMI) and ab initio molecular orbital calculations were used to calculate relative energies. Ab initio calculations were employed to perform frontier molecular orbital analyses of diene-dienophile interactions.
Date: May 1998
Creator: Shukla, Rajesh, 1964-
System: The UNT Digital Library
Interactions of Clean and Sulfur-modified Reactive Metal Surfaces with Aqueous Vapor and Liquid Environments : A Combined Ultra-high Vacuum/electrochemistry Study (open access)

Interactions of Clean and Sulfur-modified Reactive Metal Surfaces with Aqueous Vapor and Liquid Environments : A Combined Ultra-high Vacuum/electrochemistry Study

The focus of this research is to explore the molecular-level interactions between reactive metal surfaces and aqueous environments by combined ultra-high vacuum/electrochemistry (UHV-EC) methodology. The objectives of this work are to understand (1) the effects of sulfate ions on the passivity of metal oxide/hydroxide surface layer, (2) the effects of sulfur-modification on the evolution of metal oxide/hydroxide surface layer, and (3) the effects of sulfur adsorbate on cation adsorption at metal surfaces.
Date: May 1998
Creator: Lin, Tien-Chih, 1966-
System: The UNT Digital Library
The Development of Predictive Models for the Acid Degradation of Chrysotile Asbestos (open access)

The Development of Predictive Models for the Acid Degradation of Chrysotile Asbestos

The purpose of this study was to determine the factors affecting the acid degradation of chrysotile asbestos (Mg_3Si_2O_5(OH_4)) . Millions of tons of asbestos have found use in this country as insulative or ablative material. More than 95 percent of the asbestos in use is of the chrysotile variety. The remaining 5 percent is composed of various types of fibrous amphiboles. The inhalation of asbestos can lead to several diseases in humans. Asbestosis, lung cancer and mesothelioma are the most common afflictions associated with asbestos inhalation, and they may occur up to 40 years after the initial exposure. It has previously been reported that if more than 50 percent of the magnesium is removed from a chrysotile sample its carcinogenicity is reduced to nil. Several inorganic acids were studied to determine their ability to leach magnesium from chrysotile. It was found that the ability to leach magnesium was dependent upon the acidic anion in addition to the concentration of the acid. The ordering of the efficiency of the acids in their ability to remove magnesium from chrysotile was found to be HCl > H_2SO_4 > H_3PO_4 > HNO_3. Predictive equations were developed to allow the calculation of the amount of …
Date: May 1993
Creator: Ingram, Kevin D. (Kevin Dean)
System: The UNT Digital Library
Spectrofluorometric and Solubility Studies of Polycyclic Aromatic Hydrocarbons in Hydrogen Bonded Binary Solvent Mixtures (open access)

Spectrofluorometric and Solubility Studies of Polycyclic Aromatic Hydrocarbons in Hydrogen Bonded Binary Solvent Mixtures

The purpose of this dissertation is to investigate the behavior of polycyclic aromatic hydrocarbons (PAHs) in binary solvent systems and determine and/or develop predictive mathematical expressions for describing solutions in which hydrogen-bonding occurs.
Date: May 1997
Creator: Powell, Joyce R., 1968-
System: The UNT Digital Library

Layered Double Hydroxides and the Origins of Life on Earth

Access: Use of this item is restricted to the UNT Community
A brief introduction to the current state of research in the Origins of Life field is given in Part I of this work. Part II covers original research performed by the author and co-workers. Layered Double Hydroxide (LDH) systems are anion-exchanging clays that have the general formula M(II)xM(III)(OH)(2x+2)Y, where M(II) and M(III) are any divalent and trivalent metals, respectively. Y can be nearly any anion, although modern naturally occuring LDH systems incorporate carbonate (CO32-), chloride (Cl-), or sulfate (SO42-) anions. Intercalated cobalticyanide anion shows a small yet observable deviation from local Oh symmetry causing small differences between its oriented and non-oriented infrared spectra. Nitroprusside is shown to intercalate into 2:1 Mg:Al LDH with decomposition to form intercalated ferrocyanide and nitrosyl groups of an unidentified nature. The [Ru(CN)6]4- anion is shown to intercalate into layered double hydroxides in the same manner as other hexacyano anions, such as ferrocyanide and cobalticyanide, with its three-fold rotational axis perpendicular to the hydroxide sheets. The square-planar tetracyano-nickelate(II), -palladate(II), and platinate(II) anions were intercalated into both 2:1 and 3:1 Mg:Al layered double hydroxides (LDH). The basal spacings in the 2:1 hosts are approximately 11 Å, indicating that the anions are inclined approximately 75 degrees relative to …
Date: May 2001
Creator: Brister, Brian
System: The UNT Digital Library
Thermochemical investigations of crystalline solutes in non-electrolyte solutions: Mathematical representation of solubility data and the development of predictive solubility equations in systems with specific and non-specific interactions. (open access)

Thermochemical investigations of crystalline solutes in non-electrolyte solutions: Mathematical representation of solubility data and the development of predictive solubility equations in systems with specific and non-specific interactions.

Understanding the thermodynamic properties of multicomponent mixtures is of critical importance in many chemical and industrial applications. Experimental measurements become progressively difficult as the number of solution components increases -- producing the need for predictive models. Problems in development of predictive models arise if the mixture has one or more components that interact through molecular complexation or association. Experimental solubilities of anthracene and pyrene dissolved in binary systems containing one or more alcohols were measured in order to address this problem. Alcohols examined in this study were: 1-propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1-propanol, 3-methyl-1-butanol, and 1-octanol. In binary solvent mixtures containing only a single self-associating alcoholic solvent, the alkane cosolvents studied were: n-hexane, n-heptane, n-octane, 2,2,4-trimethylpentane, cyclohexane, methylcyclohexane, tert-butylcyclohexane. Predictive solubility equations were developed using mobile order theory. This approach differs from classical solution models by representing hydrogen bonding with a probability term rather than with expressions derived from stepwise equilibria or expressions to represent hypothetical solution aggregates. Results were compared with the predicted solubilities found from using expressions developed using the Kretschmer-Wiebe and Mecke-Kempter approaches for modeling associated solutions. It was found that the mobile order approach provided reasonably accurate predictions for the solute solubilities in the systems studied. The …
Date: May 2008
Creator: Zvaigzne, Anita Ilze
System: The UNT Digital Library
Predicting Chemical and Biochemical Properties Using the Abraham General Solvation Model (open access)

Predicting Chemical and Biochemical Properties Using the Abraham General Solvation Model

Several studies were done to illustrate the versatillity of the Abraham model in mathematically describing the various solute-solvent interactions found in a wide range of different chemical and biological systems. The first study focused on using the solvation model to construct mathematical correlations describing the minimum inhibitory concentration of organic compounds for growth inhibition towards the three bacterial strains Porphyromonas gingivalis, Selenomonas artemidis, and Streptococcus sobrinus. The next several studies expand the practicallity of the Abraham model by predicting free energies of partition in chemical systems. The free energy studies expand the use of the Abraham model to other temperatures and properties by developing correlations for the enthalpies of solvation of gaseous solutes of various compounds dissolved in water, 1-octanol, hexane, heptane, hexadecane, cyclohexane, benzene, toluene, carbon tetrachloride, chloroform, methanol, ethanol, 1-butanol, propylene carbonate, dimethyl sulfoxide, 1,2-dichloroethane, N,N-dimethylformamide, tert-butanol, dibutyl ether, ethyl acetate, acetonitrile, and acetone. Also, a generic equation for linear alkanes is created for use when individual datasets are small. The prediction of enthalpies of solvation is furthered by modifying the Abraham model so that experimental data measured at different temperatures can be included into a single correlation expression. The temperature dependence is directly included in the model …
Date: May 2009
Creator: Mintz, Christina
System: The UNT Digital Library
Effect of Fluorine and Hydrogen Radical Species on Modified Oxidized Ni(pt)si (open access)

Effect of Fluorine and Hydrogen Radical Species on Modified Oxidized Ni(pt)si

NiSi is an attractive material in the production of CMOS devices. The problem with the utilization of NiSi, is that there is no proper method of cleaning the oxide on the surface. Sputtering is the most common method used for the cleaning, but it has its own complications. Dry cleaning methods include the reactions with radicals and these processes are not well understood and are the focus of the project. Dissociated NF3 and NH3 were used as an alternative and XPS is the technique to analyze the reactions of atomic fluorine and nitrogen with the oxide on the surface. A thermal cracker was used to dissociate the NF3 and NH3 into NFx+F and NHx+H. There was a formation of a NiF2 layer on top of the oxide and there was no evidence of nitrogen on the surface indicating that the fluorine and hydrogen are the reacting species. XPS spectra, however, indicate that the substrate SiO2 layer is not removed by the dissociated NF3 and NiF2 growth process. The NiF2 over layer can be reduced to metallic Ni by reacting with dissociated NH3 at room temperature. The atomic hydrogen from dissociated ammonia reduces the NiF2 but it was determined that the …
Date: May 2010
Creator: Gaddam, Sneha Sen
System: The UNT Digital Library
Modeling Transition Metal Catalysts for Small Molecule Activation and Functionalization (open access)

Modeling Transition Metal Catalysts for Small Molecule Activation and Functionalization

There is a high demand for the development of processes for the conversion of ubiquitous molecules into industrially useful commodities. Transition metal catalysts are often utilized for the activation and functionalization of small organic molecules due to their diverse nature and proven utility with a myriad of chemical transformations. The functionalization of methane (CH4) and dinitrogen (N2) to methanol (CH3OH) and ammonia (NH3) respectively is of particular interest; however, both methane and dinitrogen are essentially inert due to the inherit strength of their bonds. In this dissertation a series of computational studies is performed to better understand the fundamental chemistry behind the functionalization of methane and the activation of dinitrogen in a homogeneous environment. A catalytic cycle is proposed for the oxy-functionalization of methane to methanol. The cycle consists of two key steps: (1) C-H activation across a metal-alkoxide bond (M-OR), and (2) regeneration of the M-OR species through an oxy-insertion step utilizing external oxidants. The C-H activation step has been extensively studied; however, the latter step is not as well understood with limited examples. For this work, we focus on the oxy-insertion step starting with a class of compounds known to do C-H activation (i.e., Pt(II) systems). Computational studies …
Date: May 2013
Creator: Figg, Travis M.
System: The UNT Digital Library
Kinetics of Sulfur: Experimental Study of the Reaction of Atomic Sulfur with Acetylene and Theoretical Study of the Cn + So Potential Energy Surface (open access)

Kinetics of Sulfur: Experimental Study of the Reaction of Atomic Sulfur with Acetylene and Theoretical Study of the Cn + So Potential Energy Surface

The kinetics of the reaction of atomic sulfur with acetylene (S (3P) + C2H2) were investigated experimentally via the flash photolysis resonance fluorescence method, and the theoretical potential energy surface for the reaction CN + SO was modeled via the density functional and configuration interaction computational methods. Sulfur is of interest in modern chemistry due to its relevance in combustion and atmospheric chemistry, in the Claus process, in soot and diamond-film formation and in astrochemistry. Experimental conditions ranged from 295 – 1015 K and 10 – 400 Torr of argon. Pressure-dependence was shown at all experimental temperatures. The room temperature high-pressure limit second order rate constant was (2.10 ± 0.08) × 10-13 cm3 molecule-1 s-1. The Arrhenius plot of the high-pressure limit rate constants gave an Ea of (11.34 ± 0.03) kJ mol-1 and a pre-exponential factor of (2.14 ± 0.19) × 10-11 cm3 molecule-1 s-1. S (3P) + C2H2 is likely an adduct forming reaction due to pressure-dependence (also supported by a statistical mechanics analysis) which involves intersystem crossing. The potential energy surface for CN + SO was calculated at the B3LYP/6-311G(d) level and refined at the QCISD/6-311G(d) level. The PES was compared to that of the analogous reaction …
Date: May 2013
Creator: Ayling, Sean A.
System: The UNT Digital Library
Electrochemically Deposited Metal Alloy-silicate Nanocomposite Corrosion Resistant Materials (open access)

Electrochemically Deposited Metal Alloy-silicate Nanocomposite Corrosion Resistant Materials

Zinc-nickel ?-phase silicate and copper-nickel silicate corrosion resistant coatings have been prepared via electrochemical methods to improve currently available corrosion resistant materials in the oil and gas industry. A layered silicate, montmorillonite, has been incorporated into the coatings for increased corrosion protection. For the zinc nickel silicate coatings, optimal plating conditions were determined to be a working pH range of 9.3 -9.5 with a borate based electrolyte solution, resulting in more uniform deposits and better corrosion protection of the basis metal as compared to acidic conditions. Quality, strongly adhering deposits were obtained quickly with strong, even overall coverage of the metal substrate. The corrosion current of the zinc-nickel-silicate coating is Icorr = 3.33E-6 for a borate based bath as compared to a zinc-nickel bath without silicate incorporation (Icorr = 3.52E-5). Step potential and direct potential methods were examined, showing a morphological advantage to step potential deposition. The effect of borate addition was examined in relation to zinc, nickel and zinc-nickel alloy deposition. Borate was found to affect the onset of hydrogen evolution and was examined for absorption onto the electrode surface. For copper-nickel silicate coatings, optimal conditions were determined to be a citrate based electrolytic bath, with pH = 6. …
Date: May 2013
Creator: Conrad, Heidi Ann
System: The UNT Digital Library
Synthesis, structure and redox reactivity of Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂) (open access)

Synthesis, structure and redox reactivity of Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂)

The tricobalt cluster PhCCo₃(CO)₉ (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic thioanhydride (bta) with added Me₃NO to yield PhCCo₃(CO)₇(bta) (2), which upon heating overnight yields Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂) (3). Cluster (3) has been isolated and characterized by FT-IR and ³¹P NMR spectroscopy. Structural determination of the cluster has been demonstrated by X-ray diffraction analysis. Cluster (3) is analogous to the cluster synthesized by Richmond and coworkers. The redox properties of (3) have been examined by cyclic voltammetry and the data are reported within.
Date: May 1994
Creator: Muñoz, Trinidad
System: The UNT Digital Library
Metals in Chemistry and Biology: Computational Chemistry Studies (open access)

Metals in Chemistry and Biology: Computational Chemistry Studies

Numerous enzymatic reactions are controlled by the chemistry of metallic ions. This dissertation investigates the electronic properties of three transition metal (copper, chromium, and nickel) complexes and describes modeling studies performed on glutathione synthetase. (1) Copper nitrene complexes were computationally characterized, as these complexes have yet to be experimentally isolated. (2) Multireference calculations were carried out on a symmetric C2v chromium dimer derived from the crystal structure of the [(tBu3SiO)Cr(µ-OSitBu3)]2 complex. (3) The T-shaped geometry of a three-coordinate β-diketiminate nickel(I) complex with a CO ligand was compared and contrasted with isoelectronic and isosteric copper(II) complexes. (4) Glutathione synthetase (GS), an enzyme that belongs to the ATP-grasp superfamily, catalyzes the (Mg, ATP)-dependent biosynthesis of glutathione (GSH) from γ-glutamylcysteine and glycine. The free and reactant forms of human GS (wild-type and glycine mutants) were modeled computationally by employing molecular dynamics simulations, as these currently have not been structurally characterized.
Date: May 2007
Creator: Dinescu, Adriana
System: The UNT Digital Library
Layered Double Hydroxides as Anion- and Cation-Exchanging Materials (open access)

Layered Double Hydroxides as Anion- and Cation-Exchanging Materials

Layered double hydroxides (LDH) have been principally known as anion-exchanging, clay-like materials for several decades, and continues to be the main driving force for current and future research. The chemical interactions of LDH, with transition metallocyanides, have been a popular topic of investigation for many years, partly due to the use of powder x-ray diffraction and infrared spectroscopy as the main characterization tools. Each transition metallocyanide has a characteristic infrared stretching frequency that can be easily observed, and their respective sizes can be observed while intercalated within the interlayer of the LDH. The ability of LDH to incorporate metal cations or any ions/molecules/complexes, that have a postive charge, have not been previously investigated, mainly due to the chemical and physical nature of LDH. The possibility of cationic incorporation with LDH would most likely occur by surface adsorption, lattice metal replacement, or by intercalation into the LDH interlayers. Although infrared spectroscopy finds it main use through the identification of the anions incorporated with LDH, it can also be used to study and identify the various active and inactive bending and stretching modes that the metal hydroxide layers have.
Date: May 2007
Creator: Richardson, Mickey Charles
System: The UNT Digital Library
Computational Studies on Group 14 Elements (C, Si and Ge) in Organometallic and Biological Compounds. (open access)

Computational Studies on Group 14 Elements (C, Si and Ge) in Organometallic and Biological Compounds.

A series of computational studies were carried out on Group 14 (C, Si and Ge) elements in organometallic and biological compounds. Theoretical studies on classical and H-bridged A3H3+ (A=C, Si and Ge) as p ligands with different organometallic fragments at B3LYP and B3P86 level reveal a reverse charge transfer from ligand to metal in Si and Ge complexes whereas in C complexes there is a small charge transfer from metal to ligand. The H-bridged complexes are more stable than the complexes based on Si3H3+ and Ge3H3+ ligands with terminal hydrogens. The stability of the bridged systems increases from Si to Ge. Corrective scale factors for computed harmonic CºO vibrational frequencies for 31 organometallic complexes have been determined at the HF and B3LYP levels. The scaled B3LYP frequencies exhibit a greater reliability than do HF frequencies. Experimental data have shown that Si/Ge-substituted decapeptides are advantageous over their C analog in vitro and in vivo studies in modern hormone therapy. A computational investigation was carried out on the synthesized decapeptides focusing on position 5 containing Si and Ge. The results have shown that there are some differences in C, Si and Ge-containing analogs. However, further investigations are needed to elucidate the observed …
Date: May 2007
Creator: Yu, Liwen
System: The UNT Digital Library
Study of Substituted Benzenesulfonate-Containing Layered Double Hydroxides and Investigation of the Hexamethylenetetramine Route of LDH Synthesis (open access)

Study of Substituted Benzenesulfonate-Containing Layered Double Hydroxides and Investigation of the Hexamethylenetetramine Route of LDH Synthesis

Benzenesulfonates, para-substituted with amine, chloride and methyl groups were successfully incorporated into layered double hydroxides of two different compositions, 2:1 Mg-Al LDH and 2:1 Zn-Al LDH. These parent materials were also doped with small amounts of nickel and the differences in the two systems were studied. The hexamethylenetetramine route of layered double hydroxide synthesis was investigated to verify if the mechanism is indeed homogeneous. This included attempting preparation of 2:1 Mg-Al LDH, 2:1 Zn-Al LDH and 2:1 Zn-Cr LDH with two different concentrations of hexamethylenetetramine. The analytical data of the products suggest that the homogeneous precipitation may not be the true mechanism of reaction involved in LDH synthesis by this method.
Date: May 2007
Creator: Ambadapadi, Sriram
System: The UNT Digital Library
Analysis of PAH and PCB Emissions from the Combustion of dRDF and the Nondestructive Analysis of Stamp Adhesives (open access)

Analysis of PAH and PCB Emissions from the Combustion of dRDF and the Nondestructive Analysis of Stamp Adhesives

This work includes two unrelated areas of research. The first portion of this work involved combusting densified refuse derived fuel (dRDF) with coal and studying the effect that Ca(0H)2 binder had on reducing polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) emissions. The second area of work was directed at developing nondestructive infrared techniques in order to aid in the analysis of postage stamp adhesives. With Americans generating 150-200 million tons a year of Municipal Solid Waste (MSW) and disposing of nearly ninety percent of it in landfills, it is easy to understand why American landfills are approaching capacity. One alternative to landfilling is to process the MSW into RDF. There are technical and environmental problems associated with RDF. This work provides some answers concerning the amount of PAH and PCB emissions generated via the combustion of RDF with coal. It was found that the Ca(OH)2 binder greatly reduced both the PAH and the PCB emissions. In fact, PAH emissions at the ten-percent level were reduced more by using the binder than by the pollution control equipment. If the Ca(0H)2 binder can reduce not only PAH and PCB emissions, but also other noxious emissions, such as acid gases or dioxin, …
Date: May 1989
Creator: Poslusny, Matthew
System: The UNT Digital Library
Thermal and Flash Photolysis Studies of Ligand-Exchange Reactions of Substituted Metal Carbonyl Complexes of Cr and Mo (open access)

Thermal and Flash Photolysis Studies of Ligand-Exchange Reactions of Substituted Metal Carbonyl Complexes of Cr and Mo

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.
Date: May 1989
Creator: Awad, Hani H. (Hani Hanna)
System: The UNT Digital Library
The Photolytic Ozonation of Organics in Aqueous Solutions (open access)

The Photolytic Ozonation of Organics in Aqueous Solutions

The aim of the investigation described in this work is to gain a better understanding of the processes involved in the oxidation of organic compounds by photolytic ozonation in a laboratory scale reactor. The results and discussions are presented in Chapter III. This chapter contains four parts. In the first part, mass transfer efficiency and the calculation of the mass transfer coefficient, KLa, as well as the ozone decomposition rate constant, KD, are presented and compared with those obtained by other investigators. The second part deals with the kinetics of the photolysis of 2,2',4,4',6,6'-hexachlorobiphenyl both in purified and natural lake water. Mathematical expressions and a discussion of the possible reaction processes involved are given. Kinetic models of ozonation and photolytic ozonation in purified and natural lake water are developed and discussed in part three. Rate constants are calculated from experimental data and used to predict values of substrate destruction with a mathematical model. The fourth part of this chapter deals with the identification of products from the photolysis, ozonation and photolytic ozonation of 2,2'4,4',6,6'-hexachlorobiphenyl. The products are isolated and identified using combined gas chromatography and mass spectroscopy, and reaction mechanisms are suggested.
Date: May 1980
Creator: Huang, Francis Y.
System: The UNT Digital Library
Synthesis and Structure of Polynitro- and Polymenthylpolycyclic "Cage" Monomers and Polymers (open access)

Synthesis and Structure of Polynitro- and Polymenthylpolycyclic "Cage" Monomers and Polymers

The objective of this study was to synthesize and characterize new energetic polycyclic "cage" compounds. As part of a program involved in the synthesis of new polynitropolycyclic compounds, 2,6-dinitro-5-methoxy- 7-carbomethoxypentacyclo[5. 3 .0 . 0* • * . CP • i ° . 0* •8]decane has been synthesized. This is a model system which can be used to study (1) the effect of nitro substitution on the photolability of carbon-carbon double bonds and (2) to develop methods for avoiding Haller-Bauer cleavage in cage /3-keto esters when synthesizing polynitro-substituted cage compounds.
Date: May 1987
Creator: Jin, Pei-Wen
System: The UNT Digital Library
The Nature of Intermediates Produced Through Ligand-Substitution Reactions of Octahedral Metal Carbonyls (open access)

The Nature of Intermediates Produced Through Ligand-Substitution Reactions of Octahedral Metal Carbonyls

Pulsed laser time-resolved ligand-substitution photochemistry for (DTO)W(CO)4, (DTN)W(CO)4, and (NP)Mo(CO)4 (DTO = 2,2,7,7-tetramethyl-3,6-diathiaoctane; DTN = 2,2,8,8- tetramethyl-3,7-diathianonane; NP = l-diethylamino-2- diphenylphosphinoethane) proceeds via initial fission of the W-S and Mo-P bonds, affording Cs and C4v five-coordinate intermediates for DTN and NP but largely Cs for DTO. The rates of reaction of these intermediates, via chelate ring closure and competitive bimolecular interaction with Lewis bases (= L, alkylphosphines and alkyl phosphites) for the Cs intermediates and via bimolecular interaction of L with the C4v intermediates, together with activation parameters for these processes have been determined. The rates of interactions at the Cs intermediates are significantly faster than at the C4v intermediates.
Date: May 1986
Creator: Mansour, Saber E. (Saber El-Sayed)
System: The UNT Digital Library
Reactions of Chloroketenes with Ketene Acetals (open access)

Reactions of Chloroketenes with Ketene Acetals

The first objective of this investigation was to conduct a systematic study into the reactions of chloroketenes with ketene acetals. The second objective was to explore the synthetic utility of these reaction products and offer a rational explanation for these reaction products.
Date: May 1981
Creator: Watts, Ronald David, 1943-
System: The UNT Digital Library
Synthesis of Crown Ether/Ammonium Salt for Electron Transfer Study (open access)

Synthesis of Crown Ether/Ammonium Salt for Electron Transfer Study

The theoretical model of Beratan and Onuchic predicts a large attenuation of ET rates through hydrogen bonds; however, the effect of individual hydrogen bond on electron transfer reaction has not been systematically studied. The organic complexes in this study are a series of crown ether/ammonium salt, which incorporate a redox partner on each component of the complex. The dimethoxynaphthalene redox donor was attached to the crown ether and a series of ammonium salts was synthesized which bear substituted quinone and naphthoquinone acceptor. The complexes characterization and preliminary electron transfer rate measurement were completed with UV/Vis and steady-state emission spectroscopy.
Date: May 2002
Creator: Han, Dong
System: The UNT Digital Library