Partner
Degree Department
Degree Discipline
Degree Level
392 Matching Results
Results open in a new window/tab.
Microwave Properties of Liquids and Solids, Using a Resonant Microwave Cavity as a Probe
The frequency shifts and Q changes of a resonant microwave cavity were utilized as a basis for determining microwave properties of solids and liquids. The method employed consisted of varying the depth of penetration of a cylindrical sample of the material into a cavity operating in the TM0 1 0 Mode. The liquid samples were contained in a thin-walled quartz tube. The perturbation of the cavity was achieved by advancing the sample into the cavity along the symmetry axis by employing a micrometer drive appropriately calibrated for depth of penetration of the sample. A differentiation method was used to obtain the half-power points of the cavity resonance profile at each depth of penetration. The perturbation techniques for resonant cavities were used to reduce the experimental data obtained to physical parameters for the samples. The probing frequency employed was near 9 gHz.
Date:
May 1974
Creator:
Hong, Ki H.
System:
The UNT Digital Library
Microstructural Studies of Dental Amalgams Using Analytical Transmission Electron Microscopy
Dental amalgams have been used for centuries as major restorative materials for decaying teeth. Amalgams are prepared by mixing alloy particles which contain Ag, Sn, and Cu as the major constituent elements with liquid Hg. The study of microstructure is essential in understanding the setting reactions and improving the properties of amalgams. Until the work reported in this dissertation, optical microscopy (OM), scanning electron microscopy (SEM), and x-ray diffractometry (XRD) were used commonly to analyze amalgam microstructures. No previous systematic transmission electron microscopy (TEM) study has been performed due to sample preparation difficulties and composite structure of dental amalgams. The goal of this research was to carry out detailed microstructural and compositional studies of dental amalgams. This was accomplished using the enhanced spatial resolution of the TEM and its associated microanalytical techniques, namely, scanning transmission electron microscopy (STEM), x-ray energy dispersive spectroscopy (XEDS) and micro-microdiffraction (μμD). A new method was developed for thinning amalgam samples to electron transparency using the "wedge technique." Velvalloy, a low-Cu amalgam, and Tytin, a high-Cu amalgam, were the two amalgams characterized. Velvalloy is composed of a Ag₂Hg₃ (γ₁)/HgSn₇₋₉ (γ₂) matrix surrounding unreacted Ag₃Sn (γ) particles. In addition, hitherto uncharacterized reaction layers between Ag₃Sn(γ)/Ag₂Hg₃ (γ₂) and …
Date:
May 1997
Creator:
Hooghan, Tejpal Kaur
System:
The UNT Digital Library
A Calculation of the Kaon-Neutron Scattering Cross Section
The purpose of this investigation was to study the scattering processes of K+ mesons with neutrons. In order to do such a study one must first make certain basic assumptions about the type of interaction involved and then proceed to calculate physically meaningful qualities which describe the processes. Thus, the problem is this: assuming the validity of Feynman's rules for these strongly interacting particles, calculate the differential and total scattering cross sections for the interaction of scalar K+ mesons and neutrons.
Date:
June 1966
Creator:
Hooper, Robert Gibson
System:
The UNT Digital Library
A Novel Process for GeSi Thin Film Synthesis
A unique process of fabricating a strained layer GexSi1-x on insulator is demonstrated. Such strained heterostructures are useful in the fabrication of high-mobility transistors. This technique incorporates well-established silicon processing technology e.g., ion implantation and thermal oxidation. A dilute GeSi layer is initially formed by implanting Ge+ into a silicon-on-insulator (SOI) substrate. Thermal oxidation segregates the Ge at the growing oxide interface to form a distinct GexSi1-x thin-film with a composition that can be tailored by controlling the oxidation parameters (e.g. temperature and oxidation ambient). In addition, the film thickness can be controlled by implantation fluence, which is important since the film forms pseudomorphically below 2×1016 Ge/cm2. Continued oxidation consumes the underlying Si leaving the strained GeSi film encapsulated by the two oxide layers, i.e. the top thermal oxide and the buried oxide. Removal of the thermal oxide by a dilute HF etch completes the process. Strain relaxation can be achieved by either of two methods. One involves vacancy injection by ion implantation to introduce sufficient open-volume within the film to compensate for the compressive strain. The other depends upon the formation of GeO2. If Ge is oxidized in the absence of Si, it evaporates as GeO(g) resulting in spontaneous …
Date:
December 2007
Creator:
Hossain, Khalid
System:
The UNT Digital Library
Linear, Nonlinear Optical and Transport Properties of Quantum Wells Composed of Short Period Strained InAs/GaAs Superlattices
In this work, ordered all-binary short-period strained InAs/GaAs superlattice quantum wells were studied as an alternative to strained ternary alloy InGaAs/GaAs quantum wells. InGaAs quantum wells QWs have been of great interest in recent years due to the great potential applications of these materials in future generations of electronic and optoelectronic devices. The all binary structures are expected to have all the advantages of their ternary counterparts, plus several additional benefits related to growth, to the elimination of alloy disorder scattering and to the presence of a higher average indium content.
Date:
December 1993
Creator:
Huang, Xuren
System:
The UNT Digital Library
Quaternion Representation of Crystal Space Groups
This investigation is designed to find quaternion operators which will generate selected space groups and which are more convenient to manipulate in some important types of problems.
Date:
January 1961
Creator:
Hufstetler, Thomas Jerry
System:
The UNT Digital Library
A Continuously Sensitive Cloud Chamber
A continuous cloud chamber would be a valuable asset to laboratory work in nuclear and atomic physics. For this reason the construction and investigation of a continuously sensitive diffusion cloud chamber has been undertaken. It is the purpose of this paper to report the design and operating characteristics of such a chamber.
Date:
1951
Creator:
Hughes, James E.
System:
The UNT Digital Library
Application of the Finite Element Method to Some Simple Systems in One and Two Dimensions.
The finite element method (FEM) is reviewed and applied to the one-dimensional eigensystems of the isotropic harmonic oscillator, finite well, infinite well and radial hydrogen atom, and the two-dimensional eigensystems of the isotropic harmonic oscillator and the propagational modes of sound in a rectangular cavity. Computer codes that I developed were introduced and utilized to find accurate results for the FEM eigensolutions. One of the computer codes was modified and applied to the one-dimensional unbound quantum mechanical system of a square barrier potential and also provided accurate results.
Date:
May 2002
Creator:
Hunnell, Jason C.
System:
The UNT Digital Library
Complexity as a Form of Transition From Dynamics to Thermodynamics: Application to Sociological and Biological Processes.
This dissertation addresses the delicate problem of establishing the statistical mechanical foundation of complex processes. These processes are characterized by a delicate balance of randomness and order, and a correct paradigm for them seems to be the concept of sporadic randomness. First of all, we have studied if it is possible to establish a foundation of these processes on the basis of a generalized version of thermodynamics, of non-extensive nature. A detailed account of this attempt is reported in Ignaccolo and Grigolini (2001), which shows that this approach leads to inconsistencies. It is shown that there is no need to generalize the Kolmogorov-Sinai entropy by means of a non-extensive indicator, and that the anomaly of these processes does not rest on their non-extensive nature, but rather in the fact that the process of transition from dynamics to thermodynamics, this being still extensive, occurs in an exceptionally extended time scale. Even, when the invariant distribution exists, the time necessary to reach the thermodynamic scaling regime is infinite. In the case where no invariant distribution exists, the complex system lives forever in a condition intermediate between dynamics and thermodynamics. This discovery has made it possible to create a new method of analysis …
Date:
May 2003
Creator:
Ignaccolo, Massimiliano
System:
The UNT Digital Library
Carbon Nanotube/Microwave Interactions and Applications to Hydrogen Fuel Cells.
Access:
Use of this item is restricted to the UNT Community
One of the leading problems that will be carried into the 21st century is that of alternative fuels to get our planet away from the consumption of fossil fuels. There has been a growing interest in the use of nanotechnology to somehow aid in this progression. There are several unanswered questions in how to do this. It is known that carbon nanotubes will store hydrogen but it is unclear how to increase that storage capacity and how to remove this hydrogen fuel once stored. This document offers some answers to these questions. It is possible to implant more hydrogen in a nanotube sample using a technique of ion implantation at energy levels ~50keV and below. This, accompanied with the rapid removal of that stored hydrogen through the application of a microwave field, proves to be one promising avenue to solve these two unanswered questions.
Date:
May 2004
Creator:
Imholt, Timothy James
System:
The UNT Digital Library
Homogeneous Canonical Formalism and Relativistic Wave Equations
This thesis presents a development of classical canonical formalism and the usual transition schema to quantum dynamics. The question of transition from relativistic mechanics to relativistic quantum dynamics is answered by developing a homogeneous formalism which is relativistically invariant. Using this formalism the Klein-Gordon equation is derived as the relativistic analog of the Schroedinger equation. Using this formalism further, a method of generating other relativistic equations (with spin) is presented.
Date:
January 1967
Creator:
Jackson, Albert A.
System:
The UNT Digital Library
Detection of the Resonant Vibration of the Cellular Membrane Using Femtosecond Laser Pulses
An optical detection technique is developed to detect and measure the resonant vibration of the cellular membrane. Biological membranes are active components of living cells and play a complex and dynamic role in life processes. They are believed to have oscillation modes of frequencies in the range of 1 to 1000 GHz. To measure such a high-frequency vibration, a linear laser cavity is designed to produce a train of femtosecond pulses of adjustable repetition rate. The method is then directly applied to liposomes, "artificial membrane", stained with a liphophilic potential sensitive dye. The spectral behavior of a selection of potential sensitive dyes in the membrane is also studied.
Date:
December 1989
Creator:
Jamasbi, Nooshin
System:
The UNT Digital Library
Microwave Properties of Hyaluronate Solutions Using a Resonant Microwave Cavity as a Probe
Physiological functions of a biomacromolecule seem to be closely related to its molecular conformations. The knowledge of any conformational changes due to changes in its environment may lead to a proper understanding of its functions. Hyaluronic acid, a biomacromolecule with unusually high molecular weight and some important biological functions is the subject of the present work. A temperature-dependent transition in hyaluronate solution of 120 mg/ml concentration was observed at physiological temperature. It is shown that this temperature-dependent behavior can be related to the orientational polarizability term in the Debye theory of polar molecules in liquids.
Date:
May 1980
Creator:
Jani, Shirish K.
System:
The UNT Digital Library
Relaxation Time Approximations in PAOFLOW 2.0
Electronic transport properties have been used to classify and characterize materials and describe their functionality. Recent surge in computational power has enabled computational modelling and accelerated theoretical studies to complement and accelerate experimental discovery of novel materials. This work looks at methods for theoretical calculations of electronic transport properties and addresses the limitations of a common approximation in the calculation of these properties, namely, the constant relaxation time approximation (CRTA). This work takes a look at the limitations of this approximation and introduces energy and temperature dependent relaxation times. This study is carried out on models and real systems and compared with experiments.
Date:
May 2022
Creator:
Jayaraj, Anooja
System:
The UNT Digital Library
Defect Modulated Properties of Molybdenum Disulfide Monolayer Films
In this dissertation work, the study focuses on large areal growth of MoS2 monolayers and a study of the structural, optical and electrical properties of such monolayers before and after transfer using a polymer-lift off technique. This work will discuss the issue of contact resistance and the effect of defects (both intrinsic and extrinsic) on the overall quality of the monolayer films. The significance of this dissertation work is that a reproducible strategy for monolayer MoS2 film growth and quantification of areal coverage as well as the detrimental effects of processing on device performance is presented.
Date:
May 2022
Creator:
Jiang, Yan
System:
The UNT Digital Library
Fluorine Adsorption and Diffusion in Polycrystalline Silica
The measurement of fluorine penetration into archeological flint artifacts using Nuclear Reaction Analysis (NRA) has been reported to be a potential dating method. However, the mechanism of how fluorine is incorporated into the flint surface, and finally transported into the bulk is not well understood. This research focuses on the study of the fluorine uptake phenomenon of flint mineral in aqueous fluoride solutions. Both theoretical and experimental approaches have been carried out. In a theoretical approach, a pipe-diffusion model was used to simulate the complicated fluorine transportation problem in flint, in which several diffusion mechanisms may be involved.
Date:
December 1998
Creator:
Jin, Jian-Yue
System:
The UNT Digital Library
Investigation of Room Temperature Soft Ferromagnetism in Indium Phosphide Substrate Synthesized via Low Energy Nickel Ion Implantation
In this work, we have utilized an ion beam process known as gettering to migrate implanted Ni ions much deeper into the bulk substrate than their initial projected end of the range. The projected mean depth is known as Rp. The gettering effect is the most crucial part of the fabrication and we have found that for an H fluence of 3x 1016 cm-2 there is a threshold fluence of approximately 7.5 x 1015 cm-2 that cannot be surpassed if the gettering process is to be completed along with the substrate recovered to the high crystalline quality. This hard threshold is due to the gettering process relaxation induced mechanism that is responsible for migrating the Ni to the Rp/2 location while the H is vacating during the thermal annealing process. If the total number of vacancies produced by the H dissociation is not substantially larger than the total number of implanted Ni atoms the Ni will migrate to the Rp location of the Ni implantation at the amorphous and crystalline interface and toward the surface. When the gettering condition is not met the resulting magnetic responses vary from an exceptionally weak ferromagnetic response to not exhibiting a magnetic response. Additionally, …
Date:
May 2021
Creator:
Jones, Daniel C.
System:
The UNT Digital Library
Modification of Graphene Properties: Electron Induced Reversible Hydrogenation, Oxidative Etching and Layer-by-layer Thinning
In this dissertation, I present the mechanism of graphene hydrogenation via three different electron sources: scanning electron microscopy, e-beam irradiation and H2 and He plasma irradiation. in each case, hydrogenation occurs due to electron impact fragmentation of adsorbed water vapor from the sample preparation process. in the proposed model, secondary and backscattered electrons generated from incident electron interactions with the underlying silicon substrate are responsible for the dissociation of water vapor. Chemisorbed H species from the dissociation are responsible for converting graphene into hydrogenated graphene, graphane. These results may lead to higher quality graphane films having a larger band gap than currently reported. in addition, the dissertation presents a novel and scalable method of controllably removing single atomic planes from multi-layer graphene using electron irradiation from an intense He plasma under a positive sample bias. As the electronic properties or multi-layer graphene are highly dependent on the number of layers, n, reducing n in certain regions has many benefits. for example, a mask in conjunction with this thinning method could be used for device applications.
Date:
May 2012
Creator:
Jones, Jason David
System:
The UNT Digital Library
Vertex Functions in K-Meson-Nucleon Scattering
The purpose of this study was to investigate some theoretical approaches to the scattering of positive k-mesons by nucleons in an attempt to explain the experimental data. In this work the problem has been investigated by the technique of the weak coupling approximation.
Date:
August 1966
Creator:
Kang, Hsu Hsiung
System:
The UNT Digital Library
Surface Segregation in Multi-component Systems: Modeling Binary Ni-Al Alloys Using the BFS Method
Although the study of surface segregation has a great technological importance, the work done in the field was for a long time largely restricted to experimental studies and the theoretical work was neglected. However, recent improvements in both first principles and semi-empirical methods are opening a new era for surface scientists. A method developed by Bozzolo, Ferrante, and Smith (BFS) is particularly suitable for complex systems and several aspects of the computational modeling of surfaces and segregation, including alloy surface segregation, structure and composition of alloy surfaces and the formation of surface alloys. In the following work I introduce the BFS method and apply it to model the Ni-Al alloy through a Monte-Carlo simulation. A comparison between my results and those results published by the group mentioned above was my goal. This thesis also includes a detailed explanation of the application of the BFS method to surfaces of multi-component metallic systems, beyond binary alloys.
Date:
August 2004
Creator:
Kasmi, Azeddine
System:
The UNT Digital Library
A Study of Solar Cosmic Ray Flare Effects
The purpose of this study is to determine the characteristics of the solar cosmic ray flux. This report describes the design and construction of a cosmic ray detector system used in this study and describes the analysis of the data obtained from these systems.
Date:
May 1971
Creator:
Keath, Edwin P. (Edwin Paul), 1938-
System:
The UNT Digital Library
A Study of the Celestial Gamma-ray Flux
This thesis is a study of the celestial gamma-ray flux. It reviews several of the proposed mechanisms for producing high energy gamma rays and describes several of the attempts to detect their presence. Also included is a short historical review of the spark chamber, along with a qualitative description of its operation.
Date:
June 1967
Creator:
Keath, Edwin P. (Edwin Paul), 1938-
System:
The UNT Digital Library
A Classical Theory of the Dielectric Susceptibility of Anharmonic Crystals
An expression for the dielectric susceptibility tensor of a cubic ionic crystal has been derived using the classical Liouville operator. The effect of cubic anharmonic forces is included as a perturbation on the harmonic crystal solution, and a series expansion for the dielectric susceptibility is developed. The most important terms in the series are identified and summed, yielding an expression for the complex susceptibility with an anharmonic contribution which is linearly dependent on temperature. A numerical example shows that both the real and imaginary parts of the susceptibility are continuous, finite functions of frequency.
Date:
May 1976
Creator:
Kennedy, Howard V.
System:
The UNT Digital Library
A Gauge-Invariant Energy Variational Principle Application to Anisotropic Excitons in High Magnetic Fields
A new method is developed for treating atoms and molecules in a magnetic field in a gauge-invariant way using the Rayleigh-Ritz energy variational principle. The energy operator depends on the vector potential which must be chosen in some gauge. In order to adapt the trial wave function to the gauge of the vector potential, the trial wave function can be multiplied by a phase factor which depends on the spatial coordinates. When the energy expectation value is minimized with respect to the phase function, the equation for charge conservation for stationary states is obtained. This equation can be solved for the phase function, and the solution used in the energy expectation value to obtain a gauge-invariant energy. The method is applicable to all quantum mechanical systems for which the variational principle can be applied. It ensures satisfaction of the charge conservation condition, a gauge-invariant energy, and the best upper bound to the ground-state energy which can be obtained for the form of trial wave function chosen.
Date:
December 1983
Creator:
Kennedy, Paul K. (Paul Kevin)
System:
The UNT Digital Library