States

365 Matching Results

Results open in a new window/tab.

Anomalous Behavior in the Rotational Spectra of the v₈=2 and the v₈=3 Vibrations for the ¹³C and ¹⁵N Tagged Isotopes of the CH₃CN Molecule in the Frequency Range 17-95 GHz (open access)

Anomalous Behavior in the Rotational Spectra of the v₈=2 and the v₈=3 Vibrations for the ¹³C and ¹⁵N Tagged Isotopes of the CH₃CN Molecule in the Frequency Range 17-95 GHz

The rotational microwave spectra of the three isotopes (^13CH_3^12C^15N, ^12CH_3^13C^15N, and ^13CH_3^13C^15N) of the methyl cyanide molecule in the v_8=3, v_8=2, v_7=1 and v_4=1 vibrational energy levels for the rotational components 1£J£5 (for a range of frequency 17-95 GHz.) were experimentally and theoretically examined. Rotational components in each vibration were measured to determine the mutual interactions in each vibration between any of the vibrational levels investigated. The method of isotopic substitution was employed for internal tuning of each vibrational level by single and double substitution of ^13C in the two sites of the molecule. It was found that relative frequencies within each vibration with respect to another vibration were shifted in a systematic way. The results given in this work were interpreted on the basis of these energy shifts. Large departure between experimentally measured and theoretically predicted frequency for the quantum sets (J, K=±l, ϑ=±1), Kϑ-l in the v_8=3 vibrational states for the ^13c and ^15N tagged isotopes of CH_3CN showed anomalous behavior which was explained as being due to Fermi resonance. Accidently strong resonances (ASR) were introduced to account for some departures which were not explained by Fermi resonance.
Date: December 1990
Creator: Al-Share, Mohammad A. (Mohammad Abdel)
System: The UNT Digital Library
The Size Effect on the Galvanomagnetic Properties of a Semiconductor (open access)

The Size Effect on the Galvanomagnetic Properties of a Semiconductor

A theory is developed to explain the dependence of carrier transport in a thin semiconducting film on film thickness, magnetic field strength, and the dominant bulk scattering mechanism. This theory is based on the solution of the linearized Boltzmann equation in relaxation time form. The semiconductor is assumed to be bounded and nondegenerate with spherical energy surfaces and a scalar effective mass, It is also assumed to be flat banded with totally diffuse scattering at the surface. Classical Boltzmann statistics are used for equilibrium. The dependence of the relaxation time on the carrier energy is approximated by a power law equation. The principle improvement over similar theories is the treatment of the dependence of the relaxation time on carrier energy. The power law approximation for this dependence is valid for randomizing and elastic scattering mechanisms.
Date: August 1980
Creator: Smith, V. Devon (Vernon Devon)
System: The UNT Digital Library
CO₂-Laser Induced Hot Electron Magneto-Transport Effects in n-InSb (open access)

CO₂-Laser Induced Hot Electron Magneto-Transport Effects in n-InSb

The effects of optical heating via infrared free carrier absorption on the electron magneto-transport properties of n-InSb at helium temperatures have been studied for the first time. Oscillatory photoconductivity (OPC) type structure is seen in the photon energy dependence of the transport properties. A C0₂ laser (hω = 115 to 135 meV) was used as the optical source. Concentrations between 1 x 10¹⁵ cm⁻³ and 2 x 10¹⁶ cm⁻³ were studied. The conclusions of this study are that the energy relaxation of high energy photoexcited electrons, generated by free carrier absorption of C0₂ laser radiation in degenerate n-InSb at liquid helium temperatures, is by emission of a maximum number of optical phonons, and that this relaxation mechanism produces OPC type structure in the photon energy dependence of the electron temperature of the conduction band electron gas. This structure is seen, therefore, in the transport properties of the sample, including the Shubnikovde Haas effect, the effective absorption coefficient, and the photoconductivity (mobility) response (lower concentrations only). In addition, the highest concentration studied, nₑ = ~2 x 10¹⁶ cm⁻³, sets an experimental lower limit on the concentration at which electron-electron scattering will become the dominant energy relaxation mechanism for the photoexcited electrons, …
Date: August 1979
Creator: Moore, Bradley T.
System: The UNT Digital Library
Theoretical and Experimental Linewidth Parameters in the Rotational Spectrum of Nitrogen Dioxide (open access)

Theoretical and Experimental Linewidth Parameters in the Rotational Spectrum of Nitrogen Dioxide

Contributions to the second order collision efficiency function S ⁽²⁾ (b), used in semiclassical perturbation approaches to pressure broadening of microwave and infrared spectra, due to several leading terms, dipole and quadrupole components, in the expansion of the intermolecular interaction energy are derived by method of irreducible spherical tensor operators for molecules of arbitrary symmetry. Results are given explicitly in terms of dipole and quadrupole line strengths. General expressions for dipole moment line strength in the asymmetric rotor basis as well as quadrupole moment line strength for the special case of molecules with two independent quadrupole moment components are derived. Computer programs for calculating linewidth parameters in the rotational spectrum of ¹⁴NO₂ based on Anderson and Murphy and Boggs theories are presented.
Date: December 1982
Creator: Moazzen-Ahmadi, Mohamad Nasser
System: The UNT Digital Library
Microwave Properties of Hyaluronate Solutions Using a Resonant Microwave Cavity as a Probe (open access)

Microwave Properties of Hyaluronate Solutions Using a Resonant Microwave Cavity as a Probe

Physiological functions of a biomacromolecule seem to be closely related to its molecular conformations. The knowledge of any conformational changes due to changes in its environment may lead to a proper understanding of its functions. Hyaluronic acid, a biomacromolecule with unusually high molecular weight and some important biological functions is the subject of the present work. A temperature-dependent transition in hyaluronate solution of 120 mg/ml concentration was observed at physiological temperature. It is shown that this temperature-dependent behavior can be related to the orientational polarizability term in the Debye theory of polar molecules in liquids.
Date: May 1980
Creator: Jani, Shirish K.
System: The UNT Digital Library
Line Width Parameters and Center Frequency Shifts in the Rotational Spectrum of Methyl Cyanide (open access)

Line Width Parameters and Center Frequency Shifts in the Rotational Spectrum of Methyl Cyanide

Measurement of the line width parameters of a molecule is of interest because collision diameters can be calculated from them. This gives an effective size of the molecule when it is involved in interactions with other molecules. Further, specific types of interactions can be inferred from detailed information about the dependence of the line width upon pressure. In this paper, an experiment for measuring line width parameters for methyl cyanide is described and the results of the experiment are analyzed. This investigation was successful in obtaining precise values for the line width parameter for the J-J' = 0-1, J-J'= 1-2, and J-J' = 2-3 transitions of methyl cyanide which agree with experimental values of other researchers where available. It was found that standing waves were the dominant effect in the measurement of center frequency shift.
Date: May 1978
Creator: Swindle, David L.
System: The UNT Digital Library
Field Dependence of Optical Properties in Quantum Well Heterostructures Within the Wentzel, Kramers, and Brillouin Approximation (open access)

Field Dependence of Optical Properties in Quantum Well Heterostructures Within the Wentzel, Kramers, and Brillouin Approximation

This dissertation is a theoretical treatment of the electric field dependence of optical properties such as Quantum Confined Stark (QCS) shifts, Photoluminescence Quenching (PLQ), and Excitonic Mixing in quantum well heterostructures. The reduced spatial dimensionality in heterostructures greatly enhances these optical properties, more than in three dimensional semiconductors. Charge presence in the quantum well from doping causes the potential to bend and deviate from the ideal square well potential. A potential bending that varies as the square of distance measured from the heterostructure interfaces is derived self-consistently. This potential is used to solve the time-independent Schrodinger equation for bound state energies and wave functions within the framework of the Wentzel, Kramers, and Brillouin (WKB) approximation. The theoretical results obtained from the WKB approximation are limited to wide gap semiconductors with large split off bands such as gallium arsenide-gallium aluminum arsenide and indium gallium arsenide—indium phosphide. Quantum wells with finite confinement heights give rise to an energy dependent WKB phase. External electric and magnetic fields are incorporated into the theory for two different geometries. For electric fields applied perpendicular to the heterostructure multilayers, QCS shifts and PLQ are found to be in excellent agreement with the WKB calculations. Orthogonality between electrons …
Date: August 1989
Creator: Wallace, Andrew B.
System: The UNT Digital Library
Inversion-Asymmetry Splitting of the Conduction Band in N-Type Indium Antimonide (open access)

Inversion-Asymmetry Splitting of the Conduction Band in N-Type Indium Antimonide

The origin of the Shubnikov-de Haas effect, the strain theory developed by Bir and Pikus, and a simple, classical beating-effects model are discussed. The equipment and the experimental techniques used in recording the Shubnikov-de Haas oscillations of n-type indium antimonite are described. The analysis of the experimental data showed that the angular anisotropy of the period of SdH oscillations at zero stress was unmeasurable for low concentration samples as discussed by other workers. Thus the Fermi surfaces of InSb are nearly spherical at low concentration. It was also shown that the Fermi surface of a high concentration sample of InAs is also nearly spherical. The advantages of using the magnetic field modulation and phase sensitive detection techniques in determining the beats are given. The simple, classical beating-effects model is able to explain the experimental beating effect data in InSb. The computer programs used to obtain the theoretical values of the beat nodal position, SdH frequencies, average frequency, the Fermi surface contours, and the energy eigenvalues are given.
Date: December 1976
Creator: Bajaj, Bhushan D.
System: The UNT Digital Library
Theoretical Study of Second Harmonic Generation of a Blue Laser at 486 nm Using a BBO Crystal in a Standing Wave Buildup Cavity (open access)

Theoretical Study of Second Harmonic Generation of a Blue Laser at 486 nm Using a BBO Crystal in a Standing Wave Buildup Cavity

For a spectroscopy purpose, we are interested in producing continuous wave (CW) UV laser light at 243 nm with at least 2 mW power. The theory of nonlinear optics suggests that we should be able to produce a desired 2.9 mW of 243 nm light by second harmonic generation (SHG) from a 50 mW blue laser at 486 nm using a BBO crystal in a build up cavity. The most important physical parameters are calculated. A 10 mm Brewster cut BBO crystal can provide phase matching conditions for coupling two ordinary photons at 486 nm and make a secondary beam at 243 nm. The single pass conversion efficiency is calculated not to be enough to generate 2.9 mW of SH light. My investigation shows that a standing wave build up cavity can provide a buildup factor of 94 and an overall conversion efficiency of 5.9% if one use an input coupler mirror with 1.1% transmission at 486 nm.
Date: May 2002
Creator: Khademian, Ali
System: The UNT Digital Library
Nonlinear Optical Properties of GaAs at 1.06 micron, picosecond Pulse Investigation and Applications (open access)

Nonlinear Optical Properties of GaAs at 1.06 micron, picosecond Pulse Investigation and Applications

The author explores absorptive and refractive optical nonlinearities at 1.06 [mu]m in bulk, semi-insulating, undoped GaAs with a particular emphasis on the influence of the native deep-level defect known as EL2. Picosecond pump-probe experimental technique is used to study the speed, magnitude, and origin of the absorptive and refractive optical nonlinearities and to characterize the dynamics of the optical excitation of EL2 in three distinctly different undoped, semi-insulating GaAs samples. Intense optical excitation of these materials leads to the redistribution of charge among the EL2 states resulting in an absorptive nonlinearity due to different cross sections for electron and hole generation through this level. This absorptive nonlinearity is used in conjunction with the linear optical properties of the material and independent information regarding the EL2 concentration to extract the cross section ratio [sigma][sub p]/[sigma][sub e] [approx equal]0.8, where [sigma][sub p](e) is the absorption cross section for hole (electron) generation from EL2[sup +] (EL2[sup 0]). The picosecond pump-probe technique can be used to determine that EL2/EL2[sup +]density ratio in an arbitrary undoped, semi-insulating GaAs sample. The author describes the use of complementary picosecond pump-probe techniques that are designed to isolate and quantify cumulative and instantaneous absorptive and refractive nonlinear processes. Numerical …
Date: August 1992
Creator: Cui, A.G. (Aiguo G.)
System: The UNT Digital Library
Dispersion of the Nonlinear Refractive Index of CS₂ in the Spectral Range of 9-11 μm (open access)

Dispersion of the Nonlinear Refractive Index of CS₂ in the Spectral Range of 9-11 μm

The nonlinear refractive index (n2) of room temperature liquid CS2 in the wavelength range of 9 to 11 micrometers is measured. A line tunable hybrid C02 TEA laser and amplifier system is used for the experiments. In these measurements the well known photoacoustic method is utilized to observe the onset of whole beam self-focusing. The photoacoustic signal in a CS2 cell, much longer than the confocal parameter, is monitored. The departure of the acoustic signal from linear growth marks the critical power for the onset of nonlinearity. It is experimentally verified that the phenomenon is power dependent as expected from self-focusing theory. The value of n2 is then calculated from the theoretical model of self focusing. Measurements of the on-axis irradiance transmitted through the nonlinear material as well as the measurements of beam distortion are used to verify the validity of the photoacoustic method. In all the measurements the on-axis intensity was smaller than the calculated threshold intensity for stimulated Brillouin scattering. The back reflection was monitored to make sure that stimulated Brillouin scattering was not playing a role in the phenomenon.
Date: May 1987
Creator: Mohebi, Mehrdad
System: The UNT Digital Library
Energy Distribution of Sputtered Neutral Atoms from a Multilayer Target (open access)

Energy Distribution of Sputtered Neutral Atoms from a Multilayer Target

Energy distribution measurements of sputtered neutral particles contribute to the general knowledge of sputtering, a common technique for surface analysis. In this work emphasis was placed on the measurement of energy distribution of sputtered neutral atoms from different depths. The liquid Ga-In eutectic alloy as a sample target for this study was ideal due to an extreme concentration ratio gradient between the top two monolayers. In pursuing this study, the method of sputter-initiated resonance ionization spectroscopy (SIRIS) was utilized. SIRIS employs a pulsed ion beam to initiate sputtering and tunable dye lasers for resonance ionization. Observation of the energy distribution was achieved with a position-sensitive detector. The principle behind the detector's energy resolution is time of flight (TOF) spectroscopy. For this specific detector, programmed time intervals between the sputtering pulse at the target and the ionizing laser pulse provided information leading to the energy distribution of the secondary neutral particles. This experiment contributes data for energy distributions of sputtered neutral particles to the experimental database, required by theoretical models and computer simulations for the sputtering phenomenon.
Date: August 2000
Creator: Bigelow, Alan W.
System: The UNT Digital Library
Nested Well Plasma Traps (open access)

Nested Well Plasma Traps

Criteria for the confinement of plasmas consisting of a positive and negative component in Penning type traps with nested electric potential wells are presented. Computational techniques for the self-consistent calculation of potential and plasma density distributions are developed. Analyses are presented of the use of nested well Penning traps for several applications. The analyses include: calculations of timescales relevant to the applications, e.g. reaction, confinement and relaxation timescales, self-consistent computations, and consideration of other physical phenomenon important to the applications. Possible applications of a nested well penning trap include production of high charge state ions, studies of high charge state ions, and production of antihydrogen. In addition the properties of a modified Penning trap consisting of an electric potential well applied along a radial magnetic field are explored.
Date: August 2000
Creator: Dolliver, Darrell
System: The UNT Digital Library

Scanning Tunneling Microscopy of Homo-Epitaxial Chemical Vapor Deposited Diamond (100) Films

Access: Use of this item is restricted to the UNT Community
Atomic resolution images of hot-tungsten filament chemical-vapor-deposition (CVD) grown epitaxial diamond (100) films obtained in ultrahigh vacuum (UHV) with a scanning tunneling microscope (STM) are reported. A (2x1) dimer surface reconstruction and amorphous atomic regions were observed on the hydrogen terminated (100) surface. The (2x1) unit cell was measured to be 0.51"0.01 x 0.25"0.01 nm2. The amorphous regions were identified as amorphous carbon. After CVD growth, the surface of the epitaxial films was amorphous at the atomic scale. After 2 minutes of exposure to atomic hydrogen at 30 Torr and the sample temperature at 500° C, the surface was observed to consist of amorphous regions and (2x1) dimer reconstructed regions. After 5 minutes of exposure to atomic hydrogen, the surface was observed to consist mostly of (2x1) dimer reconstructed regions. These observations support a recent model for CVD diamond growth that is based on an amorphous carbon layer that is etched or converted to diamond by atomic hydrogen. With further exposure to atomic hydrogen at 500° C, etch pits were observed in the shape of inverted pyramids with {111} oriented sides. The temperature dependence of atomic hydrogen etching of the diamond (100) surface was also investigated using UHV STM, and …
Date: May 2000
Creator: Stallcup, Richard E.
System: The UNT Digital Library

Microstructure and Electronic Structures of Er-Doped Si Nano-particles Synthesized by Vapor Phase Pyrolysis

Access: Use of this item is restricted to the UNT Community
Si nanoparticles are new prospective optoelectronic materials. Unlike bulk Si cry-stals, Si nanoparticles display intriguing room-temperature photoluminescence. A major challenge in the fabrication of Si nanoparticles is the control of their size distribution. The rare-earth element Er has unique photo emission properties, including low pumping power, and a temperature independent, sharp spectrum. The emission wavelength matches the transmission window of optical fibers used in the telecommunications industry. Therefore, the study of Er-doped Si nanoparticles may have practical significance. The goals of the research described in this dissertation are to investigate vapor phase pyrolysis methods and to characterize the microstructure and associated defects, particles size distributions and photoluminescence efficiencies of doped and undoped Si nanoparticles using analytical transmission electron microscopy, high resolution electron microscopy, and optical spectroscopy. Er-doped and undoped Si nanoparticles were synthesized via vapor-phase pyrolysis of disilane at Texas Christian University. To achieve monodisperse size distributions, a process with fast nucleation and slow growth was employed. Disilane was diluted to 0.48% with helium. A horizontal pyrolysis oven was maintained at a temperature of 1000 °C. The oven length was varied from 1.5 cm to 6.0 cm to investigate the influence of oven length on the properties of the nanoparticles. …
Date: May 2000
Creator: Chen, Yandong
System: The UNT Digital Library
Charge Collection Studies on Integrated Circuit Test Structures using Heavy-Ion Microbeams and MEDICI Simulation Calculations (open access)

Charge Collection Studies on Integrated Circuit Test Structures using Heavy-Ion Microbeams and MEDICI Simulation Calculations

Ion induced charge collection dynamics within Integrated Circuits (ICs) is important due to the presence of ionizing radiation in the IC environment. As the charge signals defining data states are reduced by voltage and area scaling, the semiconductor device will naturally have a higher susceptibility to ionizing radiation induced effects. The ionizing radiation can lead to the undesired generation and migration of charge within an IC. This can alter, for example, the memory state of a bit, and thereby produce what is called a "soft" error, or Single Event Upset (SEU). Therefore, the response of ICs to natural radiation is of great concern for the reliability of future devices. Immunity to soft errors is listed as a requirement in the 1997 National Technology Roadmap for Semiconductors prepared by the Semiconductor Industry Association in the United States. To design more robust devices, it is essential to create and test accurate models of induced charge collection and transport in semiconductor devices. A heavy ion microbeam produced by an accelerator is an ideal tool to study charge collection processes in ICs and to locate the weak nodes and structures for improvement through hardening design. In this dissertation, the Ion Beam Induced Charge Collection …
Date: May 2000
Creator: Guo, Baonian
System: The UNT Digital Library
Picosecond Dynamics of Free-Carrier Populations, Space-Charge Fields, and Photorefractive Nonlinearities in Zincblende Semiconductors (open access)

Picosecond Dynamics of Free-Carrier Populations, Space-Charge Fields, and Photorefractive Nonlinearities in Zincblende Semiconductors

Generally, nonlinear optics studies investigate optically-induced changes in refraction or absorption, and their application to spectroscopy or device fabrication. The photorefractive effect is a nonlinear optical effect that occurs in solids, where transport of an optically-induced free-carrier population results in an internal space-charge field, which produces an index change via the linear electrooptic effect. The photorefractive effect has been widely studied for a variety of materials and device applications, mainly because it allows large index changes to be generated with laser beams having only a few milliwatts of average power.Compound semiconductors are important photorefractive materials because they offer a near-infrared optical response, and because their carrier transport properties allow the index change to be generated quickly and efficiently. While many researchers have attempted to measure the fundamental temporal dynamics of the photorefractive effect in semiconductors using continuous-wave, nanosecond- and picosecond-pulsed laser beams, these investigations have been unsuccessful. However, studies with this goal are of clear relevance because they provide information about the fundamental physical processes that produce this effect, as well as the material's speed and efficiency limitations for device applications.In this dissertation, for the first time, we time-resolve the temporal dynamics of the photorefractive nonlinearities in two zincblende semiconductors, …
Date: August 1999
Creator: Stark, Thomas S.
System: The UNT Digital Library
Work Function Study of Iridium Oxide and Molybdenum Using UPS and Simultaneous Fowler-Nordheim I-V Plots with Field Emission Energy Distributions (open access)

Work Function Study of Iridium Oxide and Molybdenum Using UPS and Simultaneous Fowler-Nordheim I-V Plots with Field Emission Energy Distributions

The characterization of work functions and field emission stability for molybdenum and iridium oxide coatings was examined. Single emission tips and flat samples of molybdenum and iridium oxide were prepared for characterization. The flat samples were characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction to determine elemental composition, chemical shift, and crystal structure. Flat coatings of iridium oxide were also scanned by Atomic Force Microscopy to examine topography. Work functions were characterized by Ultraviolet Photoelectron Spectroscopy from the flat samples and by Field Emission Electron Distributions from the field emission tips. Field emission characterization was conducted in a custom build analytical chamber capable of measuring Field Emission Electron Distribution and Fowler-Nordheim I-V plots simultaneously to independently evaluate geometric and work function changes. Scanning Electron Microscope pictures were taken of the emission tips before and after field emission characterization to confirm geometric changes. Measurement of emission stability and work functions were the emphasis of this research. In addition, use of iridium oxide coatings to enhance emission stability was evaluated. Molybdenum and iridium oxide, IrO2, were characterized and found to have a work function of 4.6 eV and 4.2 eV by both characterization techniques, with the molybdenum value in agreement with previous …
Date: August 1999
Creator: Bernhard, John Michael
System: The UNT Digital Library
Photoelectric Emission Measurements for CVD Grown Polycrystalline Diamond Films (open access)

Photoelectric Emission Measurements for CVD Grown Polycrystalline Diamond Films

We examined CVD grown polycrystalline diamond films having different methane concentrations to detect defects and study the possible correlation between the methane concentration used during the growth process and the defect density. SEM and Raman results show that the amorphous and sp2 carbon content of the films increases with methane concentration. Furthermore, photoelectric emission from diamond is confirmed to be a two-photon process, hence the electrons are emitted from normally unoccupied states. We found that the photoelectric yield, for our samples, decreases with the increase in methane concentration. This trend can be accounted for in two different ways: either the types of defects observed in this experiment decrease in density as the methane concentration increases; or, the defect density stays the same or increases, but the increase in methane concentration leads to an increase in the electron affinity, which reduces the overall photoelectric yield.
Date: August 1999
Creator: Hassan, Tarek
System: The UNT Digital Library
Space-Charge Saturation and Current Limits in Cylindrical Drift Tubes and Planar Sheaths (open access)

Space-Charge Saturation and Current Limits in Cylindrical Drift Tubes and Planar Sheaths

Space-charge effects play a dominant role in many areas of physics. In high-power microwave devices using high-current, relativistic electron beams, it places a limit on the amount of radiation a device can produce. Because the beam's space-charge can actually reflect a portion of the beam, the ability to accurately predict the amount of current a device can carry is needed. This current value is known as the space-charge limited current. Because of the mathematical difficulties, this limit is typically estimated from a one-dimensional theory. This work presents a two-dimensional theory for calculating an upper-bound for the space-charge limited current of relativistic electron beams propagating in grounded coaxial drift tubes. Applicable to annular beams of arbitrary radius and thickness, the theory includes the effect introduced by a finite-length drift tube of circular cross-section. Using Green's second identity, the need to solve Poisson's equation is transferred to solving a Sturm-Liouville eigenvalue problem, which is easily solved by elementary methods. In general, the resulting eigenvalue, which is required to estimate the limiting current, must be numerically determined. However, analytic expressions can be found for frequently encountered limiting cases. Space-charge effects also produce the fundamental collective behavior found in plasmas, especially in plasma sheaths. …
Date: August 2000
Creator: Stephens, Kenneth Frank
System: The UNT Digital Library

Growing carbon nanotubes by chemical vapor deposition technique.

Access: Use of this item is restricted to the UNT Community
Carbon nanotubes were synthesized in the laboratory using chemical vapor deposition at different methane concentration. I found that a methane concentration of 4 sccm was ideal for well recognizable carbon nanotubes. A higher concentration led to fewer nanotube growth and silicon carbide structure. Coating the sample first with Fe(NO3)3 created a catalyst base on the substrate for the nanotube to adhere and grow on.
Date: May 2000
Creator: Rajan, Harihar V.
System: The UNT Digital Library
Fractional Brownian motion and dynamic approach to complexity. (open access)

Fractional Brownian motion and dynamic approach to complexity.

The dynamic approach to fractional Brownian motion (FBM) establishes a link between non-Poisson renewal process with abrupt jumps resetting to zero the system's memory and correlated dynamic processes, whose individual trajectories keep a non-vanishing memory of their past time evolution. It is well known that the recrossing times of the origin by an ordinary 1D diffusion trajectory generates a distribution of time distances between two consecutive origin recrossing times with an inverse power law with index m=1.5. However, with theoretical and numerical arguments, it is proved that this is the special case of a more general condition, insofar as the recrossing times produced by the dynamic FBM generates process with m=2-H. Later, the model of ballistic deposition is studied, which is as a simple way to establish cooperation among the columns of a growing surface, to show that cooperation generates memory properties and, at same time, non-Poisson renewal events. Finally, the connection between trajectory and density memory is discussed, showing that the trajectory memory does not necessarily yields density memory, and density memory might be compatible with the existence of abrupt jumps resetting to zero the system's memory.
Date: August 2007
Creator: Cakir, Rasit
System: The UNT Digital Library
Theoretical Cross Section for Light Scattering from Superfluid Helium-4 (open access)

Theoretical Cross Section for Light Scattering from Superfluid Helium-4

The finite lifetime of the bound roton pair is included in the theoretical light scattering cross section to explain the shape of the peak in the observed Raman light scattering cross section in He II. A model Hamiltonian is used to describe interactions between quasiparticles for the helium system. The equation of motion for the bound roton pair state, which is taken to be a collective mode of quasiparticle pairs, is solved. The cross section for light scattering is then derived using Fermi's Golden Rule with the bound roton pair as the final state. Since the bound roton pair can decay into two free phonons, a phenomenological width r is included in the cross section. The peak position and shape of the observed cross section are both fitted using a binding energy of εB = 0.37 K for the bound roton pair.
Date: May 1976
Creator: Latham, W. Peters, Jr., 1948-2016.
System: The UNT Digital Library
A Study of L-Shell X-Ray Production Cross Sections Due to [Hydrogen-1], [Helium-4], and [Lithium-7] Ion Bombardment of Selected Thin Rare Earth and ₈₂Pb Targets (open access)

A Study of L-Shell X-Ray Production Cross Sections Due to [Hydrogen-1], [Helium-4], and [Lithium-7] Ion Bombardment of Selected Thin Rare Earth and ₈₂Pb Targets

Thin target L-Shell x-ray production cross sections for protons incident on ₆₂Sm and ₇₀Yb in the energy range of 0.3 to 2.4 MeV/amu, alpha particles incident on ₆₂Sm, ₇₀Yb, and ₈₂Pb in the energy range of 0.15 to 4.8 MeV/amu, and lithium ions incident on ₅₈Ce, ₆₀Nd, ₆₂Sm, ₆₆Dy, ₆₇Ho, ₇₀Yb, and ₈₂Pb in the energy range of 0.8 to 4.4 MeV/amu have been measured. The cross section data have been compared to the planewave Born approximation (PWBA) and the PWBA modified to include binding energy and Coulomb deflection effects. The Lα₁,₂ x-ray production cross sections are best represented by the PWBA modified to include both the binding energy and Coulomb deflection effects (PWBA-BC) over the entire incident ion, incident energy, and target ranges studied. However, the Lγ₁ and Lγ₂,₃,₍₆₎ x-ray production cross sections are best represented by the PWBA except at the lower ion energies, where both the PWBA and PWBA-BC are in disagreement with the data. The comparison of Lα₁,₂/Lγ₂,₃,₍₆₎ ratios to theory reveals that the PWBA-BC does not predict the inflection point substantiated by the data, and the agreement between the data and the PWBA-BC becomes worse as the atomic number of the incident ion increases. Comparison …
Date: May 1978
Creator: Light, Glenn Michael
System: The UNT Digital Library